(2) Alpine SPV-65-SXS 6.5” Tower Rollbar Rollcage Speakers + MB Quart Amplifier

• (1) Pair Alpine SPV-65-SXS 6.5” 225 Watt Wakeboard Tower Rollbar Rollcage Speaker Pods
• (1) MB Quart NA2-400.2 400w 2-Channel Amplifier Amp For Polaris/ATV/UTV/RZR/CART

Description:

ALPINE SOUND FOR EVERY ADVENTURE
You’ve enjoyed Alpine sound while driving to your weekend adventures, but what about the moments outside your vehicle? Now you can get Alpine sound on a variety of powersport and all-terrain vehicles for an uninterrupted music experience that goes beyond the vehicle.

DESIGNED FOR VARIOUS APPLICATIONS
The included clamps are durable, with a rotating coated aluminum base that can adjust up to 90-degrees for an optimal listening position. These folding-style clamps were optimized to fit 1.5” – 2” rails on a variety of side-by-side, UTV, and many other All-Terrain vehicles.

GO BEYOND UTILITY
As an easy add-on for select side-by-side, UTV, and All-Terrain vehicles, the versatile SPV-65-SXS speakers include everything you need for an exciting music experience, including two enclosed 6.5-inch coaxial 2-way speakers and a grille-mounted, 1-inch teteron dome tweeter, all weather-resistant against the elements.

BUILT FOR THE ELEMENTS
Built to handle any driving condition, the weather-resistant SPV-65-SXS can withstand all the elements for an uninterrupted music experience. The speakers are made from rugged, durable fiberglass, finished in a matt black coating, and come with a weather-resistant plug for wiring up your speakers. The rotating aluminum base is coated for protection against the elements.

PREMIUM SOUND ON THE ROAD
The SPV-65-sxs provide the premium sound you've come to expect from Alpine. With 90W of power (225W peak power), the SPV-65-SXS speakers can be heard loud and clear, even with wind and other noise while driving. The tweeters capture the highs of your music and deliver crisp, clean sound for music details you can hear.

Features:

• Enclosed 6.5" Coaxial 2-Way Speakers
• 1" Teteron Dome Tweeter
• Drivers Rated IP55 Weather-Resistant
• Steel Frame
• ASA 978 B+ Fiberglass
  
• Built-In Pro-Style Folding Style Clamp that will fit 1.5"-2" Rails.
• Rotating Coated Aluminum Base
• 90-Degree Plug with 20AWG Pigtail

Specifications:

• 90W RMS
• 225W Peak Power Handling
• Nominal Impedance 4O
• 50-22kHz Frequency Response
• Santoprene Woofer Material
• 25mm voice coil

Features:

• MB QUART NA2 400.2 400w 2-Channel Amplifier Amp For Polaris/ATV/UTV/RZR/CART
• Marine Grade Protection: Yes - Amplifiers are ABYC & ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture.
• Pre-Amp Circuitry: Q-Stasis Pre Amplifier Stage - The highly engineered Q-Stasis pre-amplifier stage reduces incoming noise from source units dramatically improving sound quality
• Inputs: 1 Pair, RCA Nickel-Plated - High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
• Operation Mode: Two channel operation - Flexible installation allows this amplifier to run in two channel or bridged mono mode.
• Crossover / Signal Shaping: Switched FULL / LPF / HPF - Complete control of amplifier signal, essential when using two or more amplifiers
• Class / Topology: Full Range Class D - Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.
• Output Devices Technology: PWM MOSFET Power Supply - Stable power through the PC board with minimal heat generation
• Heat Sink: Aluminum - Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration
• Power Supply: Simpatico Coil Design - The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
• Output Connections: Quick Dissconect Wires, RCA Connections - Quickly remove amplifer when you are putting machine up for the winter of as a security precaution
• Connections Type: Gold-plated connections - Gold-plated power, ground, speaker and RCA corrosion resistant connections
• Diagnostics: Three-stage protection circuits - Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
• Marinized / Waterproof: Yes - Water resistant for durability in any environment

Specifications:

• Class: Full Range Class D
• Variable Voltage: 0.2V~9V
• Signal to Noise Ratio: >90dB
• Frequency Response: 20Hz-20kHz
• Crossover Type: Electronic 12dB Per Octave
• Low Pass Crossover: Switch Low Pass 300 Hz
• Bass Boost: 0-12dB@45Hz
• Subsonic Filter: 60Hz
• Power @ 2-Ohms: 2 x 200W
• Power @ 4-Ohms: 2 x 100W
• Total Channels: 2
• Audio Inputs: RCA
• Power Terminal 12v/GND: Molex 10 ga
• Speaker Terminal Wire Gauge: Molex Plug Connector
• Fusing: 1 x 30 Amps
• Certifications: Marine & Powersports
• Dimensions: 3.70 X 5.51 X 1.77 in (9.4 X 14.0 X 4.5 cm)
• Weight: 2.12 lbs (0.96 kg)

Row content