(2) Presonus Eris Pro 6 Powered 6" 2-Way Studio Monitors Speakers+Headphones+Mic

$1,249.98 $677.93 Save 46%
Shipping calculated at checkout.
Product Description

Package Includes:

  • (2) Presonus Eris Pro 6 Powered 6" Coaxial 2-Way Powered Studio Monitor Speaker
  • (1) Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
  • (1) Rockville RCM PRO Studio/Recording Condenser Microphone w Samsung Capacitors

Description of Eris Pro 6:

The Eris Pro 6 reference monitors employ a single point-source coaxial design for clear and accurate sound reproduction. This design provides superior phase alignment between components and delivers a wide sweet spot, precise stereo imaging, and symmetrical dispersion patterns – unique advantages for Dolby Atmos immersive rooms as well as stereo mix environments.


The Eris Pro 6 also delivers finely detailed transient response, and stunning dynamics that delivers a natural and less fatiguing experience. A 1.25-inch ultra-low mass, silk-dome tweeter ensures snappy, accurate transient reproduction, while a 6.5-inch woven-composite woofer offers tight, clear bass, with plenty of punch and no flab. A ported enclosure and 140 Watts of power allows the Eris Pro 6 to reach down to an astonishing 35 Hz.

Acoustic tuning controls let you configure the Eris Pro 6 for your room and three-way Acoustic Space tuning can compensate for the effects of speaker placement against a wall or in a corner.

Flexible input options let you connect almost any line-level source, from mixers to audio interfaces and more. You'll have no problem hooking your Eris speakers up to virtually anything. Lastly, provisions for wall and ceiling mounts make it easy to integrate Eris Pro 6 monitors into any stereo or multi-channel system.

Features:

  • Single point-source coaxial design for wider sweet spot and better phase alignment
  • 6.5-inch, woven-composite, low-frequency driver
  • 1.25-inch, silk-dome, high-frequency driver
  • 140W, Class AB amplification
  • 35 Hz to 20 kHz frequency response
  • 103 dB SPL (Peak, @ 1 meter)
  • Acoustic Tuning Controls: Acoustic Space (Flat, -2 dB, -4 dB), High Frequency (±6 dB, center 10 kHz, continuously variable), Mid Frequency (±6 dB, center 1 kHz, continuously variable), Low Cut (Flat, 80
  • Hz, 100 Hz @ -12 dB / octave)
  • XLR and ¼-inch TRS balanced and RCA unbalanced rear-panel stereo inputs
  • Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
  • Power Saver mode (engages after 40 minutes)
  • Wall and ceiling mountable

Includes of PRO-M50:

  • PRO-M50 headphones
  • Detachable cable
  • Soft suede and leather ear cushions (interchangeable)
  • Leather hard travel protective case
  • Gold plated ¼" adapter
All About Your PRO-M50:

Description:

Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you'll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.

The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51" coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼" adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.

Amazing sound quality will make these your go-to headphones whether in the studio or out and about!

Features:

  • Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
  • Professional High-Definition Studio Headphones
  • 40mm Neodymium drivers
  • Ergonomically designed swivel ear cups
  • Supreme sound isolation
  • Accurate sound reproduction
  • Minimal bleed
  • Sturdy and durable steel headband and arms
  • Soft leather headband cover
  • Interchangeable leather and soft suede ear cups covers included
  • Detachable 51" coil cable made of 100% Oxygen Free Copper (158" fully extended)
  • Gold plated 3.5mm connector
  • Gold plated ¼" adapter
  • Hard leather carrying case
  • Stainless steel headband frame and moving arms are durable and long-lasting

Specifications:

  • Style: Closed-Back
  • Design: Circumaural
  • Transducer Type: Dynamic
  • Driver: 40MM
  • Sensitivity: 97±3dB
  • Impedance: 32ohm
  • Frequency Response:10Hz - 25KHz
  • Max. Power: 600MW
  • Rating Power: 260MW
  • Net Weight: 290g (with cable)

All About Your RCM PRO:


How To Setup A Rockville Condenser Microphone With Your Computer:


How To Set Up A Twitch Stream With Rockville Equipment:


What's In The Box:

  • (22 gauge, 10 feet) XLR to XLR Cable - To connect to the phantom power input on your mixer or interface
  • (22 gauge, 10 feet) 3.5mm to XLR Cable - To connect the microphone to your computer
  • Metal Shock Mount
  • Large Wind-Screen/Pop-Filter
  • Owners Manual
  • Warranty Card

Description:

Introducing, the Rockville RCM PRO, our newest high-quality, professional studio/recording condenser microphone! With it's large diaphragm it provides smooth, natural sound and low noise, it also delivers great bass, mids, and highs on all of your recordings. This microphone is very sensitive to incoming sounds to give you the best possible sound! In addition, it includes a 25mm cartridge that allows for a bigger pickup area to pick up incoming sound. The cartridge is the most important aspect that determines the sound quality, and the RCM Pro has one of the best quality cartridges available for any microphone under $150. This microphone sounds better than other name brand microphones that cost twice the price!

The body of the microphone is made of a special zinc metal material. The super strong construction prevents noises from shocks and vibrations. This is especially important when recording loud music including drums and bass. The microphone head is made of strong, high quality steel and features a one-piece microphone head design. Most microphones will have a microphone head that is 2 pieces glued together. Our one-piece microphone head ensures longer life, and better durability. In addition, it helps to eliminate unwanted vibrations that may occur. This microphone has two capacitors (22µ50V and 47µ16V). We used Samsung capacitors from Korea, which are the highest quality capacitors on the market. These are important to help stabilize the voltage so that your recordings are consistent throughout, even if there are sudden changes in the volume or frequency ranges. We compared this microphone to the 3 most famous brands of microphones and the RCM PRO outperformed similar microphones that sell for over double the price!

Features:

  • Rockville RCM PRO Professional Studio/Recording Condenser Microphone
  • Best Applications: Home-Studio, Recording Studio, Broadcasting, Podcasts, Live Performances, and much more!
  • Large diaphragm for smooth, natural sound and low noise
  • 25mm Large Cartridge - Allows For Bigger Pickup Area
  • Two Large Capacitors: 22µ50V and 47µ16V
  • Large Diaphragm - Provides Smooth Natural Sound, and Great Bass, Mids, & Highs
  • High SPL Handling and Wide Dynamic Range
  • Cardioid Polar Pattern Reduces Pickup of Sounds From Sides and Rear, Reducing Unwanted Noise
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Microphone Head is Made of High Quality Steel featuring One-Piece Head Design
  • Microphone Body Is Made of Special Zinc Metal Material - Prevents Noise From Shock and Vibrations
  • Frequency Response: 20Hz - 20 kHz
  • Open Circuit Sensitivity: -30dB ±2dB (0dB = 1V/Pa @ 1 kHz)
  • Impedance: 100 Ohms
  • Equivalent Noise Level: = 23 dB A (IEC581-5)
  • Maximum Input Sound Level: 142dB SPL (THD = 1.0% @ 1 kHz)
  • Electrical Current: ?500Ua
  • Noise: 20dB SPL
  • Dynamic Range (Typical): 124 dB, 1 kHz @ Max SPL
  • Signal-to-Noise Ratio: 74 dB, 1 kHz @ 1 Pa
  • PCB Layout: Surface Mount
  • Fixed Crossover Filter Cutoff Frequency: 50Hz - 16 kHz
  • Power Requirements: 48V DC Phantom Power
  • Output Connector: 3-Pin XLR
  • Product Weight: 0.74 Lbs
  • Product Height: 7.44" inches
  • Shipping Weight: 3.32 Lbs
  • Shipping Dimensions: 13.98" x 7.87" x 3.15"
Shipping & Returns

Row content