Audio Technica AT2050 Studio Condenser Recording Microphone Mic+Boom Arm

Package Includes:

• (1) Audio Technica AT2050 Side-Address Studio Condenser Recording Microphone Mic
• (1) Audio Technica Boom Arm for USB Microphone Recording/Streaming Computer Mics

Authorized Audio Technica Dealer!

Description:

The versatile AT2050 provides consistent, superior performance in switchable cardioid, omnidirectional and figure-of-eight polar pattern settings. Its dual large diaphragms are gold-vaporized and aged to achieve optimum characteristics over years of use. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the microphone is ideal for studio and live sound use on vocals, piano, strings, drum overheads, guitar amps, and more.

Features:

• Audio Technica AT2050 Side-Address Multi-Pattern Condenser Studio/Recording Microphone
• Element: Externally-polarized (DC bias) condenser
• Polar Patterns: Cardioid, Omni-Directional, Figure-Eight
• Frequency Response: 20 Hz - 20 kHz
• Low Frequency Roll-Off: 80 Hz, 12 dB/Octave
• Open Circuit Sensitivity: -42 dB (7.9 mV) re 1V at 1 Pa
• Impedance: 120 Ohms
• Maximum Input Sound Level:
  • 149 dB SPL, 1 kHz at 1% T.H.D.;
  • 159 dB SPL, with 10 dB pad (nominal)
• Noise: 17 dB SPL
• Dynamic Range (Typical): 132 dB, 1 kHz at Max SPL
• Signal-to-Noise Ratio: 77 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 11-52V DC, 4.7 mA typical
• Switches: Polar selection; Flat, roll-off; 10 dB pad (nominal)
• Three Switchable Polar Patterns: Omni, Cardioid, Figure-Eight
• Switchable 80 Hz High-Pass Filter and 10 dB pad
• Large diaphragm for smooth, natural sound and low noise
• State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
• Includes: Shock Mount & Protective Pouch
• Product Weight: 0.91 Lbs.
• Product Dimensions: 6.69" inches Long, 2.05" inches Maximum Body Diameter

Features:

• P11998 Adjustable Studio Boom Arm
• Full 360° rotation
• Extends 2.5 feet from the base of the boom arm
• Adjustable, spring-stabilized joints with thumbscrews for easy repositioning of the microphone
• Clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick
• Included USB cable (Type B to Type A) extends 3 m (10') from the base of the boom arm
• High quality pre wired Audio Technica USB cable hardwired neatly into the boom arm so it is hidden
• If Boom arm is being used with a non-USB microphone cable can be cut and removed
• Internal cable management for clean desk appearance

Row content