Rockville RZL6 6.5" 600w Kick Panel Speakers+Amp For 2015-2018 Polaris RZR 900

$629.98 $284.95 Save 55%
Shipping calculated at checkout.
Product Description
Package Includes:
  • (1) Rockville RZL6 6.5" 600w Kick Panel Speakers For 2015-2018 Polaris RZR 900
  • (1) Rockville ATV220 2 Channel UTV/Motorcycle Bluetooth Amplifier IP65 Micro Amp

All About Your RZL6:

How to Set Up Your RZL6:


  • (2) RZR kick panel enclosures loaded with (2) 6.5" Marine Speakers


If you want the best sound for your RZR then this kick-panel enclosure and speaker package is for you. The enclosure is fiberglass and the speakers have extremely clear sound with good bass. We use a large 11 Oz magnet and top of the line components from start to finish. If you did a blind A to B test with our speakers and compare them to speakers that cost 2-3 times the price, you will like ours better. They have way more clear highs, tighter bass, and a higher sensitivity rating allowing them to play louder then our competitors’ speakers. 


  • Rockville RZL6 6.5" 600w Kick Panel Speakers For 2015-2018 Polaris RZR 900
  • Includes a pair of kick panel custom-fit speaker enclosures as well as a pair of 6.5” marine speakers that are custom tuned to the enclosures
  • Fiberglass Construction enclosure
  • Paintable
  • Enclosure Dimensions: 2.56" Depth x 14.17" Length x 7.8” Height
  • Peak power handling: 300 Watts per speaker / 600 Watts per pair
  • RMS power handling: 75 Watts per speaker / 150 watts per pair
  • Matte Black ABS Weather Resistant Grills
  • Fully Marinized Against Salt & Fresh Water Conditions
  • Molded ABS plastic speaker basket for amazing sound and protection from the elements
  • Poly Injection Cone
  • 11 Oz Y35 top of the line ferrite magnet supports high power handling
  • Rubber Surrounds
  • 1” PEI Neodymium Dome Tweeter
  • Oversized 1” Kapton Voice Coil
  • Pre-installed Stainless-Steel mounting screws included
  • Impedance: 4-Ohm
  • Frequency Response: 150Hz - 20KHz
  • Sensitivity: 93dB @ 1w/1m
  • Total Diameter: 7.17”
  • Cutout Diameter: 5.75”
  • Total Height: 3.82”
  • Mounting Depth: 2.56”


  • RZR 900: Years 2015-2018
  • RZR 4 900: Years 2015-2018
  • RZR XP 1000: Years 2014-2018
  • RZR XP4 1000: Years 2014-2018
  • RZR XP Turbo: Years 2015-2018
  • RZR XP Turbo Dynamix: Years 2018-2019
  • RZR XP 4 Turbo Dynamix: Years 2018-2019
  • RZR XP Turbo X/ XP 4 Turbo S: Years 2018-2019

All About Your ATV220:

How To Set Up Your ATV220:

How To Set Up Your ATV220 To a Head Unit:

Wires, Inputs, Outputs explained on your ATV220:


The Rockville ATV220 is a 2 channel amplifier for your ATV. It will deliver 180 x 2 @ 2 ohms RMS. We dyno-test the amp to make sure you get the power we promise.

This amp is IP65 which means even if you submerged it in water for a few seconds it would still function fine. This means you do not need to worry about your amp breaking when you spray down your vehicle.

The built in Bluetooth is great because you do not even need a head unit or controller. You can just install this amp and wire it to your speakers and Bluetooth your phone to the amp.

This amp is super compact making it easy to install in tight spaces.

If you want the most waterproof and high performing ATV amplifier on the market then this is a great option for you.


  • Rockville ATV220 2 Channel UTV/Motorcycle Bluetooth Amplifier IP65 Waterproof Micro Amp
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
  • 2 Ohms: 400 Watts (2 x 200 Watts)
  • 4 Ohms: 250 Watts (2 x 125 Watts)
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc):
  • Peak 2 Ohms: 1600 Watts (800 x 2 Watts)
  • Bridged Power Rating: 4 Ohms Bridged: 400 Watts
  • Built in Bluetooth Wireless with Auto Pairing (You can run this amp without any receiver)
  • IP65 waterproof rating
  • All inputs and wire wiring is sealed and covered
  • Conformal coated circuit board
  • Anti rust materials
  • This is one of the only amps on the market that is IP65. That means even if you submerged it for a couple of seconds it would work fine
  • Efficiency at Full Power 4 Ohm (1kHz) 84.8%
  • Efficiency at Full Power 2 Ohm (1kHz) 77.8%
  • Micro Size amplifier can easily fit in tight spaces
  • Digital Class D Audio Topology
  • Distortion(THD): =0.5%
  • Full Range/Low Pass/High Pass Configurable
  • High Input (Speaker level Input)
  • Low Pass Crossover: 32Hz-320Hz
  • High Pass Crossover: 32Hz-320Hz
  • Waterproof sheath RCA Input
  • Frequency Response: 20Hz-22KHz
  • Signal to Noise Ratio:  (1 Watt into 4 Ohms) =80dB
  • Input Sensitivity: 0.2V-6V
  • Speaker level Input Sensitivity: 0.5V-15.5V
  • Stereo Separation: =50dB
  • Fuse Rating: 35A
  • Dimensions (Inches): 8.66" L x 3.74" W x 1.73" H
  • High-Speed MOSFET Power supply
  • Status Mode LED Indicator
  • Waterproof Grade: IP65
Shipping & Returns

Row content