KICKER 45KM104 10" 350w Marine Subwoofer Boat Sub+8-Channel Amplifier+Amp Kit

$818.91 $435.90 Save 47%
Shipping calculated at checkout.
Product Description
Package Includes:
  • (1) KICKER 45KM104 10" 350w Peak/175w RMS Marine Boat Subwoofer SVC 4-ohm Sub KM10
  • (1) Rockville ATOM 8B 8 Channel 3500 Watt Marine/Boat Amplifier Amp w/Bluetooth
  • (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
  • (3) Rockville MRCA25 25 Foot Twisted Pair Marine RCA Cable 100% Copper, Split Pin

Authorized Kicker Dealer!

What's In The Box:

  • (1) 10" Woofer
  • (1) Back Gasket
  • (8) Mounting Screws
  • (8) Mounting Screw Clips
  • (1) Owner’s Manual

Description:

The KICKER® KM 10-inch Marine Subwoofer makes waves of its own in a sealed or ported enclosure. Made to take the power and the weather, this sub is custom made to bang in your boat. Packed with features and made for specifically for marine use, KICKER gives you the deep, loud bass your boat needs.

Features:

  • KICKER 45KM104 10" 350W Peak/175W RMS Marine Subwoofer SVC 4-Ohm
  • RMS Power Handling: 175 Watts
  • Peak Power Handling: 350 Watts
  • Two-Ohm Voice Coil
  • Injection-Molded Polypropylene Cone
  • Co-molded Santoprene® Surround
  • UniPlate™ Back Plate And Pole Piece
  • Thick Tinsel Leads
  • Large Ceramic Magnet
  • Rear Gasket Included
  • Polymer Basket Resists Corrosion
  • Protective Terminal Cap
  • Stainless Mounting Hardware Included
  • Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
  • Frequency Response: 30 Hz - 500 Hz
  • Impedance: 4 Ohms
  • Mounting Depth: 5" inches
  • Hole Diameter: 9 3/16"
  • Sealed Enclosure Volume Min-Max: 1-2.4 cubic feet


How To Install a Marine Amplifier onto Your Boat:

ATOM 8 Series (Product Video):


What's in the Box:

  • Amplifier
  • 80A External Fuse
  • Birth sheet with Tested Power
  • Mounting Hardware
  • Warranty Card
  • Owner’s Manual

Some Popular Configurations:

  • 4 full range speakers and 2 or 4 subwoofers
  • 8 full range speakers and 2 or 4 subwoofers
  • 8 full range speakers (one per channel)
  • 16 full range speakers (2 per channel)
  • (4) subwoofers
  • Combination of midrange speakers and tweeters
  • Combination of subwoofers, full range speakers, and tweeters

This also has an adjustable input mode switch which means if you only have 2 sets of RCA outputs on your receiver then you can still run 4 or 8 channels off of your receiver.

Description:

The all new ATOM marine series of amplifiers gives you the best of both worlds! Small footprint and big power! These also have great features like built in Bluetooth and a built in volt meter.

This amp utilizes high grade marine components including a conformal coated PCB board with a waterproof glue that is painted on to protect the circuitry. The heat sink casing, including the bottom plate, is made of stainless steel which is rustproof. The end panels, the internal mounting screws and hardware of the amp are made of stainless steel and are rustproof as well. Even after many years of use the amp will be rust free and operate like new!

The ATOM 8B is a class D 8-Channel high power amplifier with 3,500 watts peak output and 880 watts RMS rated power. The power of this amplifier is the real deal! It is enough to power multiple zones all at high volumes that you can hear over engine and wind noise.The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.

This amp has a very cool fully adjustable 12dB/Octave crossover. What is cool about it is that the crossover supports low pass, full, and high pass. This makes our amp ideal for subwoofers (sealed and vented), full range speakers, midrange speakers, and even tweeters. In high pass mode we allow you to filter out the lower frequencies (cut-off frequency adjustable between 50Hz - 250 Hz). In low pass mode we allow you to filter out the upper frequencies (cut-off frequency adjustable between 50Hz - 250 Hz). In full mode you will not be filtering any frequencies. Our advanced crossover technology will allow you to really fine tune each speaker to get the sound you desire.

The other cool thing is that this amp has 2 of these crossovers. Every 4 channels has its own set of advanced filters.

As an example; you can use:

  • Channels 1&3-2&4 for 4 full range speakers (in full mode)
  • Channels 5&6-7&8 for subwoofers (in low pass mode)

The ATOM 8B is protected by full IC controlled circuitry with mute, delay, and soft start technology to protect your amplifier and speakers from thumping when you turn your vehicle on.

Features:

  • Rockville ATOM 8B 8 Channel 3500 Watt Peak/880w Dyno-Certified RMS Marine/Boat Amplifier Amp w/Bluetooth
  • Compact design and extremely high power (Do not be fooled by the compact size; this amp is a beast!!!)
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
  • 3500 Watts System Power
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
  • RMS Power Output at 4 Ohms: 70 Watts x 8 Channels
  • RMS Power Output at 2 Ohms: 110 Watts x 8 Channels
  • RMS Bridged Power Output at 4 Ohms: 220 Watts x 4 Channels
  • Voltage display on amp
  • Configurable to 8, 6, or 4 channels
  • Bluetooth Wireless with Auto Pairing
  • RCA Line Output
  • UV and Salt Water Resistant Paint, Silk Screen and Heat Sink Enclosure
  • 80A Fuse rating!
  • Marine-Grade Conformal Coated Boards Resist Corrosion from Salt Spray and Moisture
  • Stainless steel end caps, mounting hardware, and bottom plate make this amp truly resistant to the elements
  • 4CH / 8CH Input Mode Selector
  • Independent Crossover Controls for CH1-4 and CH5-8
  • Full Range / Low Pass / High Pass Configurable
  • Variable High-Pass Filter: 50Hz - 250Hz at 12dB/per Octave
  • Variable Low-Pass Filter: 50Hz - 250Hz at 12dB/per Octave
  • Bass Equalization: Fully Adjustable 0 - 12dB at 45Hz
  • Status Mode LED Indicator
  • Digital Class D Audio Topology
  • High Speed MosFET Power Supply
  • Studio Grade Output Stage Integrated Circuit
  • Micro Size Architecture with SMD Component Circuitry
  • Non-Corrosive Black Hairline Finish Aluminum Casing
  • Conforms to the American Boat and Yacht Council (ABYC) Marine Electronic Standards
  • 4-Way System Protection Circuitry (DC, Short, Thermal, Overload)
  • Heavy-Duty Aluminum Alloy Heat-sink
  • Anti-rust RCA Inputs
  • Anti rust Bolt Down Molded Block Terminals
  • Frequency Response: 10Hz - 30KHz
  • S/N Ratio: >95dB
  • Minimum THD: <0.05%
  • Damping Factor: >150 at 100Hz
  • Input Voltage: 280mV - 7V
  • Channel Separation: >45dB
  • Input Impedance: 15K
  • Dimensions 6.7" W x 2" H x 10.8" L
  • Color: Black


                                                       

Video of RMWK:


Features:

  • Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
  • 20 ’ Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
  • 18’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
  • 18’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
  • 25’ 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
  • 25’ Blue Remote Wire
  • (1) Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
  • (1) 120A Mini-ANL Fuse
  • (1) 80A Mini-ANL Fuse
  • (2) Ring Terminals
  • (2) Spade Terminals
  • (5) Speaker Cable Terminals
  • (1) Washer
  • (10) White Cable Ties


Description:

Rockville marine audio interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned OFC copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. Our locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.

Features:

  • Rockville MRCA25 RCA Interconnect Cable
  • 25’ Ultra-Flexible PVC Shield
  • Twisted Pair
  • Premium Audiophile Marine RCA Interconnect Cable
  • High Performance Water Proof RCA Plugs
  • Tinned Copper Strands for Sonic Purity
  • Outstanding Noise Rejection, Accuracy, and Frequency Response
Shipping & Returns

Row content