KICKER 48KXMA8008 800 Watt 8-Channel Marine Boat Amplifier+10" 350w Subwoofer

• (1) KICKER 48KXMA8008 800 Watt 8-Channel Marine Boat Amplifier Class D Amp KXMA800.8
• (1) KICKER 45KM104 10" 350w Peak/175w RMS Marine Boat Subwoofer SVC 4-ohm Sub KM10

Description:

The KXMA 800-watt, eight-channel amplifier is one of the most flexible marine power pieces available today.

Real Marine™
The KICKER Real Marine standard means your amplifier is purpose-built for your boat. Every KXMA (and KMA)-Series amp comes complete with anti-corrosive speaker, power and RCA terminals, stainless-steel screws, conformal-coated circuit boards and ABYC/NMMA-compliant power connections. KICKER products also undergo rigorous testing to ensure they meet or exceed marine industry standards for UV, humidity and saltwater exposure. This unparalleled commitment to engineering quality and maritime safety is why our products truly are "Real Marine."

KXMA800.8 Marine Amplifier
Gain, crossover and bass-boost conrols are protected behind a gasket-sealed panel, as is the control cover hiding the settings, creating a water-resistant barrier to key controls. KickEQ™ delivers as much as an 6dB of extra bump with a simple turn of the knob. A powerful 24dB crossover is also included, letting you quickly tune your system to perfection. A full-range RCA output allows you to easily add another amplifier without running new signal cable to your KICKER KMC Media Center.

Features:

• Class D Amplifier
• Gain Control With "Gain Match" LED Indicator
• FIT2™ (Fail-safe Integration Technology) Circuitry
• Variable 24dB Crossover
• DSP-Controlled Preamp
• KickEQ™ 6dB Variable Bass Boost
• ABYC/NMMA-Compliant Power Terminals
• Conformal-Coated Circuit Boards
• Easy Access to Settings behind Gasket-Sealed Cover Panel
• Black Anodized Aluminum Chassis
• Top-Mounted, Teal LED Light Pipe
• Stainless-Steel Mounting Hardware Included

Specifications:

• POWER [watts/ch], 2 OHM STEREO: 100 x 8
• POWER [watts/ch], 4 OHM STEREO: 50 x 8
• POWER [watts/ch], 4 OHM BRIDGED MONO: 200 x 4
  
• DYNAMIC POWER [watts]: 1200
• DIMENSIONS [in] all models 2-1/8H x 8-5/16W x _ L: 14-3/4
• DIMENSIONS [cm] all models 5.4H x 21.0W x _ L: 37.4
• FREQUENCY RESPONSE [Hz]: 10-20k, +0/-1dB
• INPUT SENSITIVITY: High Level 250mV-10V, Low Level 125mV-5V
• SIGNAL-TO-NOISE RATIO: >95dB, a-weighted, re: rated power
• KickEQ™ BOOST: Variable 0-6dB, centered @ 40Hz (amps 1, 2, 3 and 4)

ACTIVE CROSSOVER

• (amp 1 and amp 2) 24dB/octave, Off/ HP/LP, variable 10-5kHz w/ 10x switch
• (amp 3 and amp 4) 24dB/octave, Off/ HP/LP/BP, variable HP 10–500Hz; variable LP, 40–5kHz w/ 10x switch

Authorized Kicker Dealer!

What's In The Box:

• (1) 10" Woofer
• (1) Back Gasket
• (8) Mounting Screws
• (8) Mounting Screw Clips
• (1) Owner’s Manual

Description:

The KICKER® KM 10-inch Marine Subwoofer makes waves of its own in a sealed or ported enclosure. Made to take the power and the weather, this sub is custom made to bang in your boat. Packed with features and made for specifically for marine use, KICKER gives you the deep, loud bass your boat needs.

Features:

• KICKER 45KM104 10" 350W Peak/175W RMS Marine Subwoofer SVC 4-Ohm
• RMS Power Handling: 175 Watts
• Peak Power Handling: 350 Watts
• Two-Ohm Voice Coil
• Injection-Molded Polypropylene Cone
• Co-molded Santoprene® Surround
• UniPlate™ Back Plate And Pole Piece
• Thick Tinsel Leads
• Large Ceramic Magnet
• Rear Gasket Included
• Polymer Basket Resists Corrosion
• Protective Terminal Cap
• Stainless Mounting Hardware Included
• Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
• Frequency Response: 30 Hz - 500 Hz
• Impedance: 4 Ohms
• Mounting Depth: 5" inches
• Hole Diameter: 9 3/16"
• Sealed Enclosure Volume Min-Max: 1-2.4 cubic feet

Row content