Audio Technica AT2035 Condenser Studio Recording Microphone+Pro Mic Boom Arm

Package Includes:

• (1) Audio Technica AT2035 Side Address Cardioid Condenser Studio Microphone/Mic+Case
• (1) Rockville RG30 ROGAN STAND 30" Pro Boom Arm Mic Stand w/ Fixed Mount+Desk Stand

Authorized Audio-Technica Dealer!

Description:

Designed for critical home/project/professional studio applications and live performance, this side-address cardioid studio condenser delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications, the AT2035 provides an exceptional level of consistency from model to model. It comes equipped with a protective pouch and a custom shock mount.

Features:

• Audio Technica AT2035 Side Address Cardioid Condenser Studio Microphone
• Large diaphragm for smooth, natural sound and low noise
• High SPL handling and wide dynamic range provide unmatched versatility
• Custom shock mount provides superior isolation
• Switchable 80 Hz high-pass filter and 10 dB pad
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
• Includes custom shock mount & protective pouch

Details:

• ELEMENT: Fixed-charge back plate, permanently polarized condenser
• POLAR PATTERN: Cardioid
• FREQUENCY RESPONSE: 20-20,000 Hz
• LOW FREQUENCY ROLL-OFF: 80 Hz, 12 dB/octave
• OPEN CIRCUIT SENSITIVITY: -33 dB (22.4 mV) re 1V at 1 Pa
• IMPEDANCE: 120 ohms
• MAXIMUM INPUT SOUND LEVEL: 148 dB SPL, 1 kHz at 1% T.H.D.;158 dB SPL, with 10 dB pad (nominal)
• NOISE: 12 dB SPL
• DYNAMIC RANGE (typical): 136 dB, 1 kHz at Max SPL
• SIGNAL-TO-NOISE RATIO: 82 dB, 1 kHz at 1 Pa
• PHANTOM POWER REQUIREMENTS: 11-52V DC, 3.8 mA typical
• SWITCHES: Flat, roll-off;10 dB pad (nominal)
• WEIGHT: 14.2 oz (403 g)
• DIMENSIONS: 6.69" (170.0 mm) long, 2.05" (52.0 mm) maximum body diameter
• OUTPUT CONNECTOR: Integral 3-pin XLRM-type
• ACCESSORIES FURNISHED: AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
• AUDIO-TECHNICA CASE STYLE: R5

Advantages of buying from an authorized seller:

• Best prices - We sell all Audio-Technica Products at great prices
• Full Factory Warranty
• Lifetime Customer Service by Audio-Technica product experts
• Guaranteed legitimate and authentic merchandise

Please note: If you purchase Audio-Technica from an unauthorized seller then you are taking a big risk. You will not have any manufacturers warranty, and there is no guarantee that the item is authentic, brand new, or even working.

How To Set Up Your RG30:

How To Set Up Your a Dynamic and Condenser Microphone to your RG30:

How To Set Up a Smartphone or Tablet to your RG30:

What's in the Box:

• Boom arm stand
  
• Allen key
  
• 2" long M8 screw (for desk surface-mounting)
  
• 4" long M8 screw (for desk surface-mounting thicker desks)
  
• C-Clamp for desk clamping
  
• Fixed mounting plate to mount it into your desk (comes pre-instal to the C-clamp, see our video for how to install)
  
• Built-in 6.5 foot XLR cable that is hidden and run inside the boom arm stand
  
• Mic clip
  

Description:

Why is this better than others ?

• Our model includes a high-quality C-clamp so you can mount the stand to the side or the back of a table or desk. But what really sets our item aside is that we also give you the ability to mount this to the top of the desk for a cleaner installation. This enables you to mount the boom arm in the most optimal location on your desk.
  
• We eliminate clutter by including a cable that is fixed inside of the boom arm and completely hidden. If you need to replace the cable you can easily replace it.
  
• Our boom arm has a great telescoping mechanism that makes it easy to adjust yet it will firmly stay in place.
  
• The look of this is very professional and clean. There are no springs or other eye-sores.
  
• Our boom arm completely folds in half if you need to travel with it.
  
• We build our model out of Aluminum which costs more than steel. What makes this great is it will never rust and it is more light-weight and higher quality.
  
• We include all the screws and cables, mic clip, and installation video for installing it on the top of your desk.
  

Features:

• Rockville RG30 ROGAN STAND 30” Inch Pro Boom Arm Mic Stand
  
• Includes XLR cable built into the stand that is hidden inside the stand for a clean look
  
• Deluxe pro version is one solid piece with no visible springs and an advanced articulation mechanism
  
• Easily Mounts to the top of a desk (See our install video)
  
• Easily clamps to the side of a desk with the included C-Clamp (supports desks up to 2.3" inches thick)
  
• This is made out of aluminum which is rust-free and lighter weight
  
• Arm length: 14" + 14"
  
• Position is completely adjustable
  
• Firmly stays in place once you adjust it
  
• There is a safety locking pin for the arm to lock in place (other similar stands do not have this)
  
• Foldable design, just pull the knob in the middle of the stand and it folds in half (Other similar stands do not have this)
  
• Standard 5/8" Mic Threads for Connecting Most Podcast and Vocal Microphones
  
• Suitable for studios, broadcasting, podcasting, and more

Row content