Audio Technica AT4033A Condenser Recording Microphone+Shockmount+Pro Boom Arm

Package Includes:

• (1) Audio Technica AT4033A Condenser Microphone Mic+Shockmount+Dust Cover+Case
• (1) Rockville RG30 ROGAN STAND 30" Pro Boom Arm Mic Stand w/ Fixed Mount+Desk Stand

Authorized Audio Technica Dealer!

Description:

The latest edition AT4033a, offers low-noise, symmetrical, transformerless circuitry that results in exceptional transient response and clean output signals. A studio classic and bluegrass favorite, the AT4033 cardioid studio condenser is the microphone that broke the US$1000-barrier in its class. A strong up-front presence characterizes the sonic signature of this 40 Series pro-audio classic. The AT4033a?s 80Hz high-pass filter easily switches between flat frequency response and a low-end roll-off that diminishes ambient noise and popping with closely-miked vocals. Includes the AT8449a shock mount for superior isolation.

Features:

• Audio Technica AT4033A Condenser Microphone w/ Shockmount, Dust Cover, and Case
• Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
• Precision-machined, nickel-plated brass, acoustic element baffle provides enhanced element stability and optimal sensitivity
• The 2-micron-thick, vapor-deposited gold diaphragm undergoes a five-step aging process so that the optimum characteristics achieved remain constant over years of use
• Floating-construction capsule assembly provides isolation from noise and vibration
• Open acoustical environment of the symmetrical housing assembly minimizes unwanted internal reflections
• State-of-the-art surface-mount electronics ensure compliance with A-T's stringent consistency and reliability standards
• Custom shock mount provides superior isolation
• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 30-20,000 Hz
• Low Frequency Roll-Off 80 Hz, 12 dB/octave
• Open Circuit Sensitivity: -32 dB (25.1 mV) re 1V at 1 Pa
• Impedance: 100 ohms
• Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D.; 155 dB SPL, with 10 dB pad (nominal)
• Noise: 17 dB SPL
• Dynamic Range (typical): 128 dB, 1 kHz at Max SPL
• Signal-To-Noise Ratio 77 dB, 1 kHz at 1 Pa
• Phantom Power Requirements: 48V DC, 3.2 mA typical
• Switches: Flat, roll-off; 10 dB pad (nominal)
• Weight: 13.4 oz (380 g)
• Dimensions: 6.69" (170.0 mm) long, 2.10" (53.4 mm) maximum body diameter
• Output Connector: Integral 3-pin XLRM-type
• Accessories Furnished: AT8449a shock mount for 5/8"-27 threaded stands; microphone dust cover; protective carrying case

How To Set Up Your RG30:

How To Set Up Your a Dynamic and Condenser Microphone to your RG30:

How To Set Up a Smartphone or Tablet to your RG30:

What's in the Box:

• Boom arm stand
  
• Allen key
  
• 2" long M8 screw (for desk surface-mounting)
  
• 4" long M8 screw (for desk surface-mounting thicker desks)
  
• C-Clamp for desk clamping
  
• Fixed mounting plate to mount it into your desk (comes pre-instal to the C-clamp, see our video for how to install)
  
• Built-in 6.5 foot XLR cable that is hidden and run inside the boom arm stand
  
• Mic clip
  

Description:

Why is this better than others ?

• Our model includes a high-quality C-clamp so you can mount the stand to the side or the back of a table or desk. But what really sets our item aside is that we also give you the ability to mount this to the top of the desk for a cleaner installation. This enables you to mount the boom arm in the most optimal location on your desk.
  
• We eliminate clutter by including a cable that is fixed inside of the boom arm and completely hidden. If you need to replace the cable you can easily replace it.
  
• Our boom arm has a great telescoping mechanism that makes it easy to adjust yet it will firmly stay in place.
  
• The look of this is very professional and clean. There are no springs or other eye-sores.
  
• Our boom arm completely folds in half if you need to travel with it.
  
• We build our model out of Aluminum which costs more than steel. What makes this great is it will never rust and it is more light-weight and higher quality.
  
• We include all the screws and cables, mic clip, and installation video for installing it on the top of your desk.
  

Features:

• Rockville RG30 ROGAN STAND 30” Inch Pro Boom Arm Mic Stand
  
• Includes XLR cable built into the stand that is hidden inside the stand for a clean look
  
• Deluxe pro version is one solid piece with no visible springs and an advanced articulation mechanism
  
• Easily Mounts to the top of a desk (See our install video)
  
• Easily clamps to the side of a desk with the included C-Clamp (supports desks up to 2.3" inches thick)
  
• This is made out of aluminum which is rust-free and lighter weight
  
• Arm length: 14" + 14"
  
• Position is completely adjustable
  
• Firmly stays in place once you adjust it
  
• There is a safety locking pin for the arm to lock in place (other similar stands do not have this)
  
• Foldable design, just pull the knob in the middle of the stand and it folds in half (Other similar stands do not have this)
  
• Standard 5/8" Mic Threads for Connecting Most Podcast and Vocal Microphones
  
• Suitable for studios, broadcasting, podcasting, and more

Row content