Audio Technica ATW-1102 System 10 Wireless System w/Handheld Mic+Mackie Monitors

$664.94 $394.90 Save 41% Sold out
Shipping calculated at checkout.
Product Description
Package Includes:
  • (1) Audio Technica ATW-1102 System 10 Wireless Microphone System w/ Handheld Mic
  • (1) Mackie MP-120 Single Dynamic Driver Professional In-Ear Monitors + Carry Case

$50 Trade-In Rebate Program for 600 MHz Wireless Systems

Audio-Technica is offering a “Trade In On Your Terms” program to help you make the switch out of 600 MHz. For each 600 MHz wireless system you trade in (regardless of manufacturer) you’ll receive a rebate towards your purchase of this (or another A-T) product. This program will run from August 15, 2017, through March 31, 2019.

 to find out how to claim your rebate and all of the eligible Audio-Technica Wireless Systems!

To Register Online, go to:  
Offer Promotion #78844


Authorized Audio-Technica Dealer!


Description of ATW-1102:

Audio-Technica’s System 10 is a digital high-fidelity wireless system designed to provide performing musicians and presenters with advanced 24-bit operation, easy setup and clear, natural sound quality. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 offers extremely easy operation and instantaneous channel selection. Up to eight channels may be used together without any frequency coordination problems or group selection issues. System 10 receivers and transmitters offer an easy-to-read digital ID display.

System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.

AT8456a Quiet-Flex™ Microphone Stand Clamp
Quiet-Flex™ stand clamp for A-T handheld wireless transmitters, 5/8"-27 threads.

Features:

  • Audio Technica ATW-1102 System 10 wireless microphone with transmitter and Quiet Flex Stand
  • Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
  • 2.4 GHz range – completely free from TV interference
  • Three levels of diversity assurance: frequency, time, & space
  • Automatic frequency selection for seamless, interference-free operation
  • Extremely easy operation with instantaneous channel selection, sync, and set-up
  • State-of-the-art digital receiver for reliable performance
  • Balanced XLR and unbalanced 1/4” output jacks with level control

What's Included:

(1) ATW-R1100 receiver
(1) ATW-T1002 handheld dynamic unidirectional microphone
(1) AT8456a Quiet-Flex™ stand clamp

General System Details:

  • Operating Frequencies 2.4 GHz ISM band
  • Dynamic Range >109 dB (A-weighted), typical
  • Total Harmonic Distortion <0.05% typical
  • Operating Range 30 m (100') typical
  • Open range environment with no interfering signals
  • Operating Temperature Range 0° C to +40° C (32° F to 104° F)
  • Battery performance may be reduced at very low temperatures
  • Frequency Response 20 Hz to 20 kHz
  • Depending on microphone type

Body Pack Transmitter Details:

  • RF Power Output 10 mW
  • Spurious Emissions Following federal and national regulations
  • Input Connections Four-pin Locking Connector
  • Pin 1: GND, Pin 2: INST INPUT,
  • Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
  • Batteries Two 1.5V AA
  • not included
  • Battery Life >7 hours (alkaline)
  • Depending on battery type and use pattern
  • Dimensions 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
  • Net Weight 100 grams (3.5 oz) without batteries

Handheld Transmitter/Microphone Details:

  • RF Power Output 10 mW
  • Spurious Emissions Following federal and national regulations
  • Batteries Two 1.5V AA not included
  • Battery Life >7 hours (alkaline)
  • Depending on battery type and use pattern
  • Dimensions 254.8 mm (10.03") long,
  • 50.0 mm (1.97") diameter
  • Net Weight 280 grams (9.9 oz) without batteries
  • Accessory Included AT8456a Quiet-Flex™ stand clamp

Description of MP-120:

We’ve been helping artists perform their best for decades with our renowned loudspeaker designs, and now we’re bringing that signature sound straight to your ears. MP-120 Professional In-Ear Monitors feature specially molded enclosures for an ergonomic fit providing hours of comfort and superior noise isolation. The over-ear design ensures an uninterrupted performance while the precision-tuned dynamic driver provides clear and punchy sound so you never miss a beat. And with the included hard case, your investment will always be protected. When you want to hear yourself on stage without all the noise that comes with it, MP-120 Professional In-Ear Monitors have got you covered.

Features:

  • Mackie MP-120 Single Dynamic Driver Professional In-Ear Monitors + Carry Case
  • Professional Design:
    • Ergonomically molded low-profile enclosure offers maximum comfort, sound isolation, and bass response
  • Precision Dynamic Driver:
    • MP-120 in-ear monitors feature a single high-performance dynamic driver for responsive, full-range sound
  • Made for Artists:
    • MP-120 in-ear monitors deliver the performance and comfort that artists need to be in tune with the stage
  • High-Fidelity Cable:
    • The shielded, braided cable is designed for extra durability and sonic performance
    • Equipped with a detachable MMCX connector that swivels for increased comfort and durability
    • The over ear design keeps them securely in your ears and the cables behind your head for uninterrupted performance
  • Perfect Fit:
    • With three different types of ear tips included and in three different sizes, you can choose what works best for your ears to provide maximum comfort and sound isolation
    • Ear tip types included are foam, silicone, and double flange in small, medium, and large size
  • Included Accessories:
    • Hard molded case protects your investment when not in use
    • Gold-plated 1/8” to 1/4" adapter
  • Frequency Response: 20 Hz – 20 kHz
  • Impedance: 32 Ohms
  • Transducer Type: Single Dynamic
  • Sensitivity: 102 dB
Shipping & Returns

Row content