(8) Rockville RM-PREMIUM-65 BLACK 6.5" 600w Marine Boat Speakers+8-Channel Amp

$1,249.96 $495.95 Save 60%
Shipping calculated at checkout.
Product Description
Package Includes:
  • (4) Pair Rockville RM-PREMIUM-65 BLACK 6.5" 600w Marine Boat Speakers - Crisp Sound!
  • (1) Rockville ATOM 8B 8 Channel 3500 Watt Marine/Boat Amplifier Amp w/Bluetooth
  • (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
  • (3) Rockville MRCA25 25 Foot Twisted Pair Marine RCA Cable 100% Copper, Split Pin


How To Set Up Your RM-PREMIUM-65 Speakers:

How To Install Your RM-PREMIUM-65 into kick panel speaker pods:



  • Pair of 6.5" Marine Speakers
  • 9.84 feet of Speaker Wire
  • Stainless Steel Mounting Screws


The Rockville RM-PREMIUM 65 marine speakers are our best sounding boat speakers. These have 11 Oz Y35 magnets for extreme power handling. The surface area of the cone on our speaker is significantly larger compared to 6.5" speakers from other brands. Our speaker outputs better low frequencies due to this. For high frequencies we have a 1” PEI dome tweeter with neo magnets. The highs are incredibly crisp and clear. We did many listening tests and our speaker out-performed speakers that are about 4 times the price.

One other important note is that the sensitivity rating of these is amazing so even if you are powering these with a regular receiver they will go super loud and sound great! If you are using an external amplifier then you are also in luck because the power handling is 75w RMS per speaker! This is perfect for amplifiers that can produce anywhere from 15w to 100w RMS per speaker at a 4 ohm load.

This is perfect for use in boats, ATV's, UTV's, and more.

With the RM-PREMIUM 65 you are paying for quality and performance, not for a fancy brand label. This is better and cheaper. You get way more than what you pay for guaranteed.


  • Pair Rockville RM-PREMIUM-65 BLACK 6.5" 600w Marine Boat Speakers - Crisp Sound!
  • Best sounding Rockville marine speakers! 
  • Peak power handling: 600 Watt per pair / 300 Watts per speaker
  • RMS power handling: 150 Watt per pair / 75 Watts per speaker
  • ABS Water/Weather Resistant Grills
  • Fully Marinized Against Salt & Fresh Water Conditions
  • Molded ABS basket for amazing sound and protection from the elements while out on the water
  • Water and weather resistant Poly Injection Cone
  • 11 Oz Y35 top of the line magnet supports high power handling
  • Thick Rubber Surround
  • High quality ferrite magnet
  • 1” PEI Neodymium Dome Tweeter has Clear highs
  • Oversized 1” Kapton Voice Coil
  • Pre-installed Stainless-Steel mounting screws included
  • Perfect for Marine, Car, ATV and UTV applications
  • Impedance: 4-Ohm
  • Frequency Response: 35Hz - 20KHz
  • Sensitivity: 93dB @ 1w/1m
  • Total Diameter: 7.17”
  • Cutout Diameter: 5.787”
  • Total Height: 3.82”
  • Mounting Depth: 2.56”

How To Install a Marine Amplifier onto Your Boat:

ATOM 8 Series (Product Video):

What's in the Box:

  • Amplifier
  • 80A External Fuse
  • Birth sheet with Tested Power
  • Mounting Hardware
  • Warranty Card
  • Owner’s Manual

Some Popular Configurations:

  • 4 full range speakers and 2 or 4 subwoofers
  • 8 full range speakers and 2 or 4 subwoofers
  • 8 full range speakers (one per channel)
  • 16 full range speakers (2 per channel)
  • (4) subwoofers
  • Combination of midrange speakers and tweeters
  • Combination of subwoofers, full range speakers, and tweeters

This also has an adjustable input mode switch which means if you only have 2 sets of RCA outputs on your receiver then you can still run 4 or 8 channels off of your receiver.


The all new ATOM marine series of amplifiers gives you the best of both worlds! Small footprint and big power! These also have great features like built in Bluetooth and a built in volt meter.

This amp utilizes high grade marine components including a conformal coated PCB board with a waterproof glue that is painted on to protect the circuitry. The heat sink casing, including the bottom plate, is made of stainless steel which is rustproof. The end panels, the internal mounting screws and hardware of the amp are made of stainless steel and are rustproof as well. Even after many years of use the amp will be rust free and operate like new!

The ATOM 8B is a class D 8-Channel high power amplifier with 3,500 watts peak output and 880 watts RMS rated power. The power of this amplifier is the real deal! It is enough to power multiple zones all at high volumes that you can hear over engine and wind noise.The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.

This amp has a very cool fully adjustable 12dB/Octave crossover. What is cool about it is that the crossover supports low pass, full, and high pass. This makes our amp ideal for subwoofers (sealed and vented), full range speakers, midrange speakers, and even tweeters. In high pass mode we allow you to filter out the lower frequencies (cut-off frequency adjustable between 50Hz - 250 Hz). In low pass mode we allow you to filter out the upper frequencies (cut-off frequency adjustable between 50Hz - 250 Hz). In full mode you will not be filtering any frequencies. Our advanced crossover technology will allow you to really fine tune each speaker to get the sound you desire.

The other cool thing is that this amp has 2 of these crossovers. Every 4 channels has its own set of advanced filters.

As an example; you can use:

  • Channels 1&3-2&4 for 4 full range speakers (in full mode)
  • Channels 5&6-7&8 for subwoofers (in low pass mode)

The ATOM 8B is protected by full IC controlled circuitry with mute, delay, and soft start technology to protect your amplifier and speakers from thumping when you turn your vehicle on.


  • Rockville ATOM 8B 8 Channel 3500 Watt Peak/880w Dyno-Certified RMS Marine/Boat Amplifier Amp w/Bluetooth
  • Compact design and extremely high power (Do not be fooled by the compact size; this amp is a beast!!!)
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
  • 3500 Watts System Power
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
  • RMS Power Output at 4 Ohms: 70 Watts x 8 Channels
  • RMS Power Output at 2 Ohms: 110 Watts x 8 Channels
  • RMS Bridged Power Output at 4 Ohms: 220 Watts x 4 Channels
  • Voltage display on amp
  • Configurable to 8, 6, or 4 channels
  • Bluetooth Wireless with Auto Pairing
  • RCA Line Output
  • UV and Salt Water Resistant Paint, Silk Screen and Heat Sink Enclosure
  • 80A Fuse rating!
  • Marine-Grade Conformal Coated Boards Resist Corrosion from Salt Spray and Moisture
  • Stainless steel end caps, mounting hardware, and bottom plate make this amp truly resistant to the elements
  • 4CH / 8CH Input Mode Selector
  • Independent Crossover Controls for CH1-4 and CH5-8
  • Full Range / Low Pass / High Pass Configurable
  • Variable High-Pass Filter: 50Hz - 250Hz at 12dB/per Octave
  • Variable Low-Pass Filter: 50Hz - 250Hz at 12dB/per Octave
  • Bass Equalization: Fully Adjustable 0 - 12dB at 45Hz
  • Status Mode LED Indicator
  • Digital Class D Audio Topology
  • High Speed MosFET Power Supply
  • Studio Grade Output Stage Integrated Circuit
  • Micro Size Architecture with SMD Component Circuitry
  • Non-Corrosive Black Hairline Finish Aluminum Casing
  • Conforms to the American Boat and Yacht Council (ABYC) Marine Electronic Standards
  • 4-Way System Protection Circuitry (DC, Short, Thermal, Overload)
  • Heavy-Duty Aluminum Alloy Heat-sink
  • Anti-rust RCA Inputs
  • Anti rust Bolt Down Molded Block Terminals
  • Frequency Response: 10Hz - 30KHz
  • S/N Ratio: >95dB
  • Minimum THD: <0.05%
  • Damping Factor: >150 at 100Hz
  • Input Voltage: 280mV - 7V
  • Channel Separation: >45dB
  • Input Impedance: 15K
  • Dimensions 6.7" W x 2" H x 10.8" L
  • Color: Black

Video of RMWK:


  • Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
  • 20' Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
  • 18' 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the battery compartment
  • 18' 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
  • 25' 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
  • 25' Blue Remote Wire
  • (1) Silver Mini-ANL Fuse Holder - Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
  • (1) 120A Mini-ANL Fuse
  • (1) 80A Mini-ANL Fuse
  • (2) Ring Terminals
  • (2) Spade Terminals
  • (5) Speaker Cable Terminals
  • (1) Washer
  • (10) White Cable Ties

Description of MRCA25:

Rockville marine audio interconnect cables are specifically engineered to withstand the challenges of both salt water and fresh water marine installations. The utilization of tinned OFC copper conductors with polyethylene dielectrics in a twisted-pair arrangement optimizes noise rejection. The small-diameter white PVC jacket is ultra-flexible enabling our cables to be easily routed around bends and through tight spaces. Our exclusive molded connector features a water proof inner cap that is heat shrunk in place over all solder connections thus guaranteeing a completely water proof and corrosion resistant connection. Our locking plug design with split pin technology further insures tight connections that will not vibrate free even during the most extreme boating maneuvers.


  • Rockville MRCA25 RCA Interconnect Cable
  • 25' Ultra-Flexible PVC Shield
  • Twisted Pair
  • Premium Audiophile Marine RCA Interconnect Cable
  • High Performance Water Proof RCA Plugs
  • Tinned Copper Strands for Sonic Purity
  • Outstanding Noise Rejection, Accuracy, and Frequency Response
Shipping & Returns

Row content