JBL VRX918SP Powered Active 18" 1500 Watt Subwoofer Sub w/DSP+Audio Technica Mic
Product Description
- (1) JBL VRX918SP Powered Active 18" 1500w Flyable Suspendable Subwoofer Sub w/DSP
- (1) Audio Technica ATW-3212/C510DE2 3000 Wireless Handheld Microphone+Mic Receiver
Description:
18 in. High Power Powered Flying Subwoofer
The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive®, 18" woofer in a front-loaded, vented enclosure. The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers.
Features:
- Built-in JBL Drivepack® DPC-2 amplifier module designed by Crown provides 1500 Watts of peak Power. DSP based resident input module provides system optimization, EQ and crossover functionality.
- 18 inch, 2268FF dual voice coil, neodymium magnet Differential Drive® woofer for high-power capacity and light weight.
- Integral rigging hardware for simple connection of enclosures and optional array frame.
- 20 mm threaded pole socket for solid, secure satellite speaker mounting.
- Large port area for reduced distortion.
Specifications:
- Power Rating: 1500 Watts PeakLF: Dual-Bridged Technology™, Class D
- Frequency Range: 31 Hz – 220 Hz
- Dimensions (H x W x D): 508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in)
- Frequency Response (-10dB): 31 Hz – 220 Hz
- Maximum Peak Output: 126 dB SPL at 1m
- Bandpass Nominal Impedance: LF: 2 x 2 ohms
- LF Driver: 1 x JBL 2268FF 457 mm (18 in) dual voice coil Differential Drive® woofer with neodymium-magnet
- Inputs: XLR with loop through
- User Controls: Input Attenuator (0-16 dB)Selectable 80 Hz or 120 Hz Low Pass 80 Hz High-Pass enable/disable for XLR loop thru.
- System Processing: DSP based, resident in Input Module
- System Management: DSP based limiters for mechanical and thermal protection
- AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60Hz
- AC Line Voltage: User selectable: 120V/240V (-15%, +10%)
- AC Input Connector: Neutrik PowerCon (NAC 3MPA)
- AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)
- AC Current Requirements: 6A per system at 120V, 3A per system at 240V
- Enclosure: 18 mm birch plywood.
- Suspension / Mounting: Optional VRX-AF line-array frame kit or 10 mm forged eyebolts
- Finish: Black DuraFlex™ finish
- Grille: Powder coated, black, 16-gauge perforated steel with acoustically transparent foam
- Net Weight (each): 38.5 kg (85 lb)
- Optional Accessories: VRX-AF array frameSRX718S-CVR: Pull-over padded cover (works with WK-4S) SS4-BK adjustable satellite speaker pole WK-4S Caster kit
- Outputs: 1 x XLR
- Nominal Impedance: LF: 2 x 2 ohms
Authorized Audio-Technica Dealer!
What’s in the box:
- ATW-R3210 receiver
- ATW-T3202 handheld transmitter
- ATW-C510 cardioid dynamic microphone capsule
Description:
Providing easy setup, versatile operation and rock-solid, richly detailed high-fidelity sound, Audio-Technica’s fourth-generation 3000 Series wireless systems give users the power and flexibility to operate within the congested UHF spectrum.
With a class-leading 60 MHz tuning range – more than twice that offered by the previous versions – the new 3000 Series systems are available in frequency bands – DE2 (470–530 MHz). Frequencies can be easily scanned and selected on the receiver and then synced with the transmitter via IR sync functionality. The 3000 Series even lets users set a backup frequency that can be quickly swapped by pressing the transmitter’s multifunction button in the event of unexpected interference.
This system configuration features an ATW-R3210 receiver along with an ATW-T3202 handheld transmitter and an ATW-C510 interchangeable capsule. The ATW-T3202 comes with an ATW-C510 dynamic interchangeable cardioid capsule, and its industry-standard thread allows for the use of Audio-Technica and other compatible capsules. The transmitter features rugged, metal housings and is powered by two AA batteries. Charging terminals on the transmitter work with the ATW-CHG3 and networkable ATW-CHG3N smart charging docks (sold separately) to recharge NiMH batteries. Antenna power is available for powered antennas and other in-line RF devices. A ground-lift switch helps eliminate audible hum caused by ground loops. The system features balanced and unbalanced audio output jacks.
60 MHz Tuning Range
With a class-leading 60 MHz tuning range – more than twice that offered by the previous versions – the new 3000 Series systems are available in frequency bands – DE2 (470–530 MHz). Frequencies can be easily scanned and selected on the receiver and then synced with the transmitter via IR sync functionality. The 3000 Series even lets users set a backup frequency that can be quickly swapped by pressing the transmitter’s multifunction button in the event of unexpected interference.
Interchangeable Cardioid Capsule
The ATW-T3202 comes with an ATW-C510 dynamic interchangeable cardioid capsule, and its industry-standard thread allows for the use of Audio-Technica and other compatible capsules.
Multi-Function button
Unique multifunction button on the body-pack transmitter can be used to switch to a backup frequency
Charging terminals
Charging terminals on each transmitter work with the ATW-CHG3 and networkable ATW-CHG3N smart charging docks (sold separately) to recharge NiMH batteries
OLED Screens
Transmitters and receivers include OLED screens for optimal readout of key settings and alerts
Features:
- Extremely wide 60 MHz UHF tuning bandwidth for maximum versatility in an increasingly congested RF environment; available in frequency bands: DE2 (470–530 MHz)
- Unique multifunction button on the handheld transmitter can be used to switch to a backup frequency (on both transmitter and receiver) should interference be encountered
- True Diversity operation reduces dropouts
- Auto Squelch feature automatically adjusts squelch setting to maximize range while minimizing potential interference
- Frequency scan and IR sync functionality for ease of setup
- Dual-mode receiver display can switch between standard view or a performance view that highlights key metering
- Transmitter and receiver include OLED screens for optimal readout of key settings and alerts
- Handheld transmitter offers extremely low handling noise and includes an industry-standard thread mount for use with six interchangeable A-T microphone capsules, as well as other compatible capsules
- Charging terminals on transmitter work with optional ATW-CHG3 and ATW-CHG3N smart charging docks to recharge NiMH batteries
- Antenna power available for powered antennas and other in-line RF devices
- Ground-lift switch helps eliminate audible hum caused by ground loops
- Balanced and unbalanced audio output jacks
- ATW-C510 dynamic interchangeable cardioid capsule
Specifications:
Microphone | |
---|---|
Element | Dynamic |
Polar Pattern | Cardioid |
Frequency Response |
90 - 12000 Hz |
Impedance |
50 Ohms |
Weight |
129 g |
Dimensions |
78.5 mm long, 53.7 mm max. diameter |
Output Connector |
Interchangeable industry-standard thread |
Overall System | |
---|---|
Operating Frequencies |
Band DE2: 470.125 to 529.975 MHz Please note that some frequency bands might not be available in your territory or could come with a limited tuning bandwidth / transmitting power due to local regulations. |
Minimum Frequency Step |
25 kHz |
Modulation Mode |
FM |
Maximum Deviation |
ATW-T3201: ±38 kHz (THD:10%) ATW-T3202: ±36 kHz (THD:10%) |
Simultaneous Use |
40 Channels per band* For assistance with multi-band operation or other frequency coordination issues, please contact your regional Audio-Technica customer service representitive. *Region and band dependent |
Frequency Response |
ATW-T3201: 31 Hz to 15500 Hz ATW-T3202: 25 Hz to 16700 Hz |
Operating Range |
100 m |
Dynamic Range |
ATW-T3201 Mic input: > 115 dB (A-weighted), typical ATW-T3201 Inst input: > 112dB (A-weighted), typical ATW-T3202: > 115 dB (A-weighted), typical |
Total Harmonic Distortion |
<1.0% (at 1 kHz, ±17.5 kHz deviation) |
Operating Temperature Range |
-5 ºC to +45 ºC |
Receiver | |
---|---|
Receiving System |
True Diversity |
Sensitivity |
20 dBuV at 60 dBA S/N ratio (50? termination) |
Maximum Output Level |
XLR / Balanced: +14 dBV 6.3 mm (¼"") / Unbalanced: +8 dBV |
Antenna Input |
BNC-type, 50 O |
Power Output |
12 V DC, 160 mA (combined) |
Power Supply | 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply |
Dimensions |
210.0 mm x 191.0 mm x 43.4 mm (W x H x D) |
Weight |
1100 g, without accessories |
Accessories Included |
Two Flexible UHF antennas AC adapter (country dependent) Rack Mount Adaptors |
Handheld Transmitter | |
---|---|
RF Power Output |
High: 30 mW, Low: 10 mW (switchable), at 50 O |
Spurious Emissions |
Following Federal and National Regulations |
Microphone Element |
Shipping & Returns
Row content