Rockville RXD-T2 Micro Car Audio Class D Amplifier 2400w 2 Channel 2x600W CEA Rated

$299.99 $110.00 Save 63% Sold out
Shipping calculated at checkout.
Product Description
The RXD-T2 is part of the Rockville proton series. This is one of the most versatile and durable car amps in the world. It is completely water resistant! This makes it perfect for any type of crazy installation including car, ATV, boat, or any other 12 volt application! The amplifier's small footprint adds to its versatility so you can mount it even in the tightest locations. This amplifier is full marine-grade! This means it will last longer! We thought about it and decided if we wanted to make a car amplifier that is indestructible we need to make it marine grade! This amp can handle the extremes! It will withstand hot, cold, moisture, or whatever you throw at it! The other thing that makes this amp so durable is that it has a class "D" power supply. So even if you run it at really low impedance the amplifier can handle it! The amp is efficient and does not generate a ton of heat. So even if you abuse the amplifier and run it at 1 ohm load in stereo mode or a 2 ohm load in bridged mode; the amplifier will handle it! (We tested it).

Warning: This amplifier produces insane power! We do not want you to blow your speakers. Do not under-estimate this amplifiers' capability! After purchasing this amplifier; install with the gain level down all the way and then crank it up very slowly to protect your speakers or subwoofers from blowing.

The RXD-T2 is rated at 1200w RMS, but we totally underrated these! We just received new test reports from our QC department showing this amp outputting a legitimate 1600w RMS when bridged! This amp performs at 600 x 2 @ 2 ohms RMS and when you bridge it you get 1600 x 1 @ 4 ohms! (To get even more power you can run it at 1 ohm in stereo mode and 2 ohm in bridged mode). This is a full range class "D" amplifier. It is super super efficient. I want you all to know that the ratings are more than legit... They are actually under-rated. This amp is a full range class "D" amplifier so it's super-super efficient. I invite you to test them and write a review when you are done testing.

We will offer a 90 day money back guarantee. If you are not happy with the output power or sound quality, we will call tag the amp back and refund all of your money!

One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. RXD-T2 has (3) 35 Amp fuses. This amplifier will also go louder than most amps with this same fuse rating due to how efficiently it runs.

There is really no amplifier on the market that sounds this good and has this much output power at this price point.
Features:

  • Rockville RXD-T2 Micro Class D Car Amplifier 2400 Watt 2 Channel 2x400W CEA Rated
  • Full-Range Class D Amplifier Architecture
  • CEA Compliant Power Ratings:
  • 800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N
  • 1200 Watts (2 x 600 Watts) at 2 ohms < 1% THD
  • 1600 Watts (1 x 1600 Watts) bridged @ 4 Ohms < 1% THD
  • Peak Power Ratings:
  • 2400 Watts: (2 x 1200 Watts) @ 2 Ohms and (1 x 2400 Watts) @ 4 Ohms bridged
  • Fully marine grade amplifier
  • Protected from moisture, saltwater, UV, bumps, vibrations, heat, cold, and more
  • Double Sided Surface Mount (SMD) PCB Design 
  • High-Speed MOSFET Power Supply
  • Studio-Grade Bipolar Output Stage Transistors
  • 2-Ohm Stable Stereo
  • 4-Ohm Mono Bridgeable
  • Mute and Delay Soft Start System
  • Full IC-Controlled Protection Circuitry
  • RCA Preamp Line Output
  • Status Mode LED Indicator
  • 8 Volt Preamp Circuitry
  • 4 Gauge Lucite Encapsulated Power/Ground Terminals
  • 12 Gauge Lucite Encapsulated Speaker Terminals
  • Fully Adjustable 12dB / Octave Crossover
  • Low Pass 50Hz - 250Hz
  • High Pass 50Hz - 250Hz
  • Fully Adjustable 12dB Bass Equalizer with Differential Circuitry
  • Minimum THD at Rated Power: < 0.05%
  • Frequency Response: 15Hz - 20KHz 
  • S / N Ratio: 100dB
  • S/N Ratio: >97dB
  • Damping Factor: > 200 @ 100Hz
  • 3 x 35 Amp Fuses 
  • Dimensions: (W x H x L) 6.7" x 1.98" x 12.25"

Owner’s Manual

About Rockville Quality Control Procedures:

 The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville DJ/PA speakers are backed with a full 1 Year warranty, though it is unlikely that you will need to use it.
Shipping & Returns

Row content