Polk Audio 10" DVC Subwoofer+Kicker Mono Amplifier For Polaris RZR/ATV/UTV/Cart

• (1) Polk Audio MM1042DVC 10” 1200 Watt Dual 4-Ohm Car/Marine Audio Subwoofer Sub
• (1) Kicker 42PXA500.1 500w Mono Amplifier Amp 4 Polaris/Motorcycle/ATV/UTV/RZR/Cart

Authorized Polk Dealer!

Description of MM1042DVC:

The Premium Upgrade
Tuned for the total sonic accuracy you get in a studio subwoofer, the MM1 Series reconfigures this kind of high-quality deep bass impact for an on-the-go listening experience that totally outperforms your OEM factory setup.

Advanced High-Performance Bass
Every element of the MM1 Series is meticulously engineered for thunderous bass, enhanced sonic detail and ultra-durable construction—Dynamic Balance technology, a high excursion bump stack motor structure, glass fiber formers, multilayered and oversized voice coils, high-temp Conex spiders, a vented pole and basket structure, and integrated fuses.

Ultra-Marine Certified
Featuring an IP56 rating that includes a non-corrosive fiberglass reinforced ABS basket, a water-proof surround, weep holes for proper drainage and a polypropylene cone, you get extra, long-lasting protection—that’s all salt-fog and UV tested.

Dynamic Balance Technology
Patented process that guides material selection through rigorous testing that identifies and cancels out unwanted resonant frequencies.

Included:

• One 8" 4 ohm subwoofer
• Stainless steel mounting hardware

Features:

• Polk Audio MM1042DVC 10” 1200 Watt Dual 4-Ohm Car/Marine Audio Subwoofer Sub
• Driver Compliment: 10" (254mm)
  
• Cutout Dimensions: 9" (230mm)
• Mounting Height: 0.55" (14.06mm)
  
• Mounting Depth (Top): 4.6" (115mm)
• Mounting Depth (Bottom): 5" (129mm)
• Peak Power Handling: 1200 Watts
• Continuous Power Handling: 400 Watts RMS
• Nominal Impedance: 4 Ohms
• Frequency Response: 28Hz-200kHz
  
• Sensitivity: 86 dB
• Magnet Weight: 54.4 oz
• Magnet Material: Ceramic
• Magnet Size: 140mm x 60mm x 25mm
• VC Diameter: 2"
• Enclosure Volumes:
• Minimum Sealed: 1.0 cu. ft.
• Maximum Sealed: 2.4 cu. ft.
• Minimum Vented: 1.25 cu. ft.
• Maximum Vented: 1.75 cu. ft.

Description of 42PXA500.1:

PX Amplifiers :
PX Amplifiers are specially designed to deliver tremendous power in a tiny, weatherproof footprint – without taxing your charging system.

Go Anywhere :
Whether it's in a car, motorcycle, or any vehicle with a small charging system - you want an amp tough enough to thrive no matter where the ride takes you. A weatherproof wiring harness, moisture-resistant circuit board and aluminum casing.

Full Control :
With auto turn-on options, built-in crossovers and flexible input styles, KICKER® amps give you the custom sound you need. Add the CXARC Remote Bass Controller to any mono PX amp for adjustable volume, right from the drivers seat.

Big Power. Mini Size :
With as much as 500 watts of power, the only thing small about these amps is their footprint. Made to fit nearly anywhere, these miniature power plants start at under five inches in total width.

PXA500.1 Amplifier :

The PXA500.1 Mono Amplifier is purpose-built for anyone who needs big power with a tiny footprint.

Perfect for motorcycles, side-by-sides, ATV’s and more, this weatherproof amp delivers huge power, on or off the road. A 24dB selectable crossover with 24dB subsonic filter, made to craft your sound to exacting standards. A wide range of input levels make this amp easy to hook up with a factory radio or aftermarket. To control your bass on the go, connect the optional CXRC remote for easy control of your sound.

This PXA amplifier delivers as much as 500 watts into one channel. See below for more details.

Features:

• Kicker 42PXA500.1 500 Watt RMS Motorcycle/ATV/Marine Mono Subwoofer Amplifier
• RMS Power in Watts:
• 500 watts RMS x 1 at 2 ohms
• 250 watts RMS x 1 at 4 ohms
• Fuse rating : 40A x 1
• Length : 8-1/14"
• Height : 1-9/16"
• Width : 3-7/16"
• Frequency Response : 25 - 120Hz
• Signal-to-Noise Ratio : 95 dB
• Input Sensitivity :
• Low Level : 125mV–5V
• High Level : 250mV–10V
• Electronic Crossover : Selectable 60Hz, 80Hz, 100Hz or 120Hz low pass; 24 dB/octave slope
• KickEQ™ Bass Boost : Selectable 0 or +6dB @ 40Hz
• Subsonic Filter : 25Hz, 24 dB/octave slope
• Remote Bass : Yes
• Weather proof
• Preamp and speaker-level inputs as well as two auto turn-on modes (DC offset or 12-volt trigger)
• 8-gauge power and ground leads recommended (Not Include in This Amplifier)

Row content