4) Rockville 6.5" Tower Speakers+Hifonics 4-Ch Amp+Bluetooth Control RZR/ATV/UTV

$817.98 $379.80 Save 54%
Shipping calculated at checkout.
Product Description
Package Includes:
  • (1) Hifonics TPS-A350.4 350w 4-Channel Marine Amplifier For Polaris RZR/ATV/UTV/Cart
  • (2) (2) Rockville RWB70B Black 6.5" 250w Marine Wakeboard 360° Swivel Tower Speakers
  • (1) Hifonics TPS-BT1 Bluetooth Marine Pre-Amp Controller
Description of TPS-A350.4:

Hifonics THOR compact Four Channel, 350 watt Powersports amplifier with on-board equalization and simple installation with quick release connectors.

Features:

  • Hifonics TPS-A350.4 350w 4-Channel Marine Amplifier For Polaris RZR/ATV/UTV/Cart
  • Marine Grade Protection: YES - Amplifiers are ABYC & ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture.
  • Pre-Amp Circuitry: Low Noise Pre-Amplifier Stage - Special preamplifier reduces incoming noise from source units dramatically improving sound quality
  • Inputs: 2 Pair, RCA Nickel-Plated - High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
  • Operation Mode: Four channel operation - Flexible installation allows this amplifier to run in four channel or bridged mono mode.
  • Crossover / Signal Shaping: Switched FULL / LPF / HPF - Complete control of amplifier signal, essential when using two or more amplifiers
  • Class / Topology: Full Range Class D - Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.
  • Output Devices Technology: PWM MOSFET Power Supply - Stable power through the PC board with minimal heat generation
  • Heat Sink: Aluminum - Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration
  • Power Supply: Simpatico Coil Design - The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
  • Output Connections: Quick Dissconect Wires, RCA Connections - Quickly remove amplifer when you are putting machine up for the winter of as a security precaution
  • Connections Type: Gold-plated connections - Gold-plated power, ground, speaker and RCA corrosion resistant connections
  • Diagnostics: Three-stage protection circuits - Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
  • Marinized / Waterproof: YES - Water resistant for durability in any environment

Specifications:

  • Class: Full Range Class D
  • Variable Voltage: 0.2V~9V
  • Signal to Noise Ratio: >90dB
  • Frequency Response: 20Hz-20kHz
  • Crossover Frequency Range CH1 & CH2: Switched HP/ Full
  • Crossover Frequency Range CH3 & CH4: Switched HP/ Full
  • Bass Boost: 0-12dB@45Hz
  • Power @ 2-Ohms: 4 x 80W
  • Power @ 4-Ohms: 4 x 40W
  • Total Channels: 4
  • Audio Inputs: RCA
  • Power Terminal 12v/GND: Molex 10 ga
  • Speaker Terminal Wire Gauge: Molex Plug Connector
  • Fusing: 1 x 30 Amps
  • Certifications: Marine & Powersports
  • Dimensions: 3.70 X 5.51 X 1.77 inches (9.4 X 14.0 X 4.5 cm)
  • Weight: 2.16 lbs (0.98 kg)

HOW TO RWB SERIES (RWB65B, RWB65W, RWB70B, RWB70W, RWB80B, RWB80W, RWB90W, RWB90B):

 

Video of RWB:

Includes:

  • (2) Wakeboard Speakers
  • (2) 360°Swivel Mounting Brackets
  • Integrated Grill
  • Installation Hardware

Description:

  • No exaggerated power ratings : These speakers are rated with true world RMS ratings. No bootleg or exaggerated power ratings like other brands. These speakers are 150 watts RMS and 250 watts peak each. (150 watts RMS is equal to about 400 watts rated by other brands)
  • Marine grade components and materials: these speakers are truly marine grade. They will not get damaged by water, salt water, or moisture. In addition the terminals (which are normally the first part of a marine speakers that gets damaged by water are made out of stainless steel and they are completely rustproof. There is also an additional waterproof coating cut completely protect the speakers.
  • These can withstand all elements on the water for a lifetime of worry free use
  • The mounting screws are longer than other versions we carry to accommodate thicker mounting bars. In addition to wakeboard tower's on boats, we tested these to be perfect for installing in Jeep Cherokee vehicles and even ATV's.
  • We’ve added a new and improved nylon mounting bracket. Nylon is strong, light weight, and can withstand the toughest conditions. The bracket features a special UV coating to protect it from the elements. A 360° rotating mechanism built into the bracket allows you to position the speaker in any direction for optimum listening enjoyment. This also gives you the ability to rotate the speaker to the front or rear of your boat for different applications.

Features:

  • (2) Rockville RWB70B Black 6.5" 250w Marine Wakeboard 360° Swivel Tower Speakers
  • Color : Black
  • 6.5" Two-Way High Fidelity Speaker System
  • Adjustable Nylon Mounting Bracket Reinforced With Embedded Steel
  • Includes Stainless Steel Mounting Hardware
  • 1" Polymide Dome Neodymium Midrange Tweeter
  • Built-In Two-Way Crossover Network
  • Fully Marinized Against Salt & Fresh Water Conditions
  • Completely Water / Rust Resistant
  • Terminals Are Sealed with Rubber Gaskets
  • Specially Tuned for PA Voice Over
  • Polypropylene Mica Injected Cone with Santoprene Surround
  • High BL Magnet Motor Structure
  • Y30 High Density Magnets
  • Oversized 1.25” Kapton Voice Coil
  • These Wakeboards Fit bars ranging from 1.26" 2.87"
  • Includes 65mm and 80mm screws that accommodate Jeep Wrangler and any roll bar
  • Includes Stainless mounting hardware that wont rust or corrode

Details:

  • Power Rating : 
  • Peak Power Handling : 500 Watts (250 Watts per Speaker)
  • RMS Power Handling : 300 Watts (150 Watts per Speaker)
  • Frequency Response : 70 – 20,000 Hz
  • Sound Pressure Level : 96dB @ 1w/1m
  • Impedance : 4 Ohms
  • Mounting Depth : 9"

    The Rockville Difference:
    Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want! 

    About Rockville Quality Control Procedures:
    The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty, though it is unlikely that you will need to use it.

    Great features and great quality make Rockville a great choice.

     

    Description of TPS-BT1:

    For installations where a full size radio/source until will not fit, Hifonics has designed the ridiculously small TPS-BT1 Bluetooth, pre-amp controller. That model comes from THOR Power Sports Bluetooth 1. It might be your favorite controller you have ever used. The amount of control and connectivity you will have at your fingertips is shocking.

    All the music, from your Bluetooth enabled device, directly into your system via this small controller. The TPS-BT1 is fully IPX67 protected against the elements so it is perfect for installation right in the dash of your Side-X-Side or off road application.  

    For custom car builders, looking to keep an original clean look, This Bluetooth controller is a great option to changing out the original dash radio in a classic.        

    Features:

    • Hifonics TPS-BT1 Bluetooth Marine Pre-Amp Controller 4 Polaris RZR/ATV/UTV/Cart 
    • Pre-amp controller
    • Volume and track selection are controlled by the multi-functional joystick
    • 2 volts output
    • Waterproof Bluetooth controller designed to fit into a small hole
    • iPhone, Android & Bluetooth Device Ready
    Shipping & Returns

    Row content