MTX RZR-14-THUNDER5 Receiver+Front+Tower Speakers+Sub For Polaris RZR 1000/900

$2,199.95 $2,399.95
Shipping calculated at checkout.
Product Description

Features of AWMC3:

  • MTX AWMC3 Marine Receiver with Bluetooth, AM/FM/WB/SiriusXM for Boat
  • RMS Power @ 2 Ohms: 50 Watts x 4 Channels
  • Line Output Impedance: 10k Ohms
  • Line Output: 2V
  • Cut Out Size: 3" inches
  • Internal 4 x 50 Watt Power Amplifier
  • 3" Full Color TFT Display
  • SiriusXM® Radio Ready (SiriusXM Connect Vehicle Tuner and Subscription Sold Separately)
  • AM / FM / WB Tuner
  • Bluetooth® Audio Streaming
  • Auxiliary Input
  • USB Charging
  • iPhone® - Unit Will Charge and Play Music Through USB
  • Android® - Unit Will Charge, but Will NOT Play Music Through USB
  • Unit Will Play Music and Display Album Artwork Using a USB Memory Stick (.mp3)
  • Weather Resistant (IP66)
  • 2 Sets of Pre-Outs (Front / Rear)
  • Selectable EQ
  • Backlit Control Buttons
  • Product Dimensions (H x W x D): 4.31" x 4.31" x 4.25" inches

Features of RZR-14-FS:

  • Integrated RGB LED Lighting
  • Custom Fit for RZR® Kick Panel
  • Custom Quick Mount Bracket with POD-LOC Technology for Easy Installation
  • Rotationally Molded Sealed Enclosure
  • Factory Matched Texture
  • Polypropylene Woofer and Mylar Dome Tweeter
  • Installer Friendly Design
  • Direct Fit, No Cutting or Drilling Required

Specifications:

  • RMS Power Handling: 50-Watts
  • Peak Power Handling: 100-Watts
  • Sensitivity (2.83V/1m): 89.9dB
  • Sensitivity (1W/1m): 85.6dB
  • Frequency Response: 70Hz - 20kHz
  • Impedance: 4Ù

Features of RZR-14-SW:

  • Can Be Used as a Ported or Sealed Enclosure
  • Includes an MTX 55 Series Subwoofer for its Deep Bass Reproduction Capabilities
  • QuIPS (Quick Install Port Seal) Technology
  • Mounts Behind Dashboard
  • Factory Matched Texture
  • Installer Friendly Design
  • Direct Fit, No Cutting or Drilling Required 

Specifications:

  • 10" Loaded Subwoofer Enclosure
  • RMS Power Handling: 400-Watts
  • Peak Power Handling: 800-Watts
  • Sensitivity (2.83V/1m): 90.2dB
  • Sensitivity (1W/1m): 83.5dB
  • Frequency Response: 28Hz - 130Hz
  • Impedance: Dual 4Ù

Features of MUD100.4:

  • MTX MUD100.4 400 Watt RMS 4-Channel Amplifier For Polaris RZR/ATV/UTV/Cart
  • RMS Power @ 4 Ohms: 50 Watts x 4 Channels
  • RMS Power @ 2 Ohms: 100 Watts x 4 Channels
  • RMS Power Bridged @ 4 Ohms: 200 Watts x 2 Channel
  • Peak Power Handling: 400 Watts
  • Topology: Full Range Class D
  • Weather Resistant: IP66 Rating
  • THD: <0.2%
  • Frequency Response: 10Hz - 32kHz
  • Crossover: Fixed HPF/LPF @ 80Hz, 12dB/Oct
  • Max Sensitivity: 200mV
  • Maximum Input Signal: 5V
  • Internal 4 x 50 Watt Power Amplifier
  • Compact Design Enables Installation Anywhere
  • Conformal Coated Printed Circuit Board that Resists Moisture
  • Fixed Crossovers, High and Low Pass Allow Use with Full Range Speakers or Subwoofers
  • Product Dimensions (H x W x D): 6.52" x 5.51" x 1.86" inches

Features of MUD65PL:

  • 2 MTX MUD65PL 6.5" 100w Tower Roll Bar LED Speakers For Polaris RZR/ATV/UTV/Jeep
  • Fits Bars with Diameters of 1.5", 1.75", and 2"
  • Polypropylene Woofer and Soft Dome Tweeter
  • Internal Crossover Network
  • ABS Impact Resistant Grille with UV Inhibitor
  • Tested 500hrs to ASTM B117, D4329 Standard
  • RGB LEDs in Grille Allow Selection of Red, Blue, or Green
  • Optional Remote Control and Wiring Harness Available for Custom Color Creation (MUDLEDC)

Specifications:

  • Description: 6.5" 2-Way Cage Mount Speakers
  • RMS Power (Watts): 50
  • Peak Power (Watts): 100
  • Sensitivity: 86 dB
  • Impedance: 4 Ohm
  • Cone Material: Polypropylene
  • Frequency Response: 70Hz - 20kHz
  • Grille: Yes
  • Environmental Spec: 500hrs ASTM B117, D4329
  • Light: RGB LED In Grille
  • Dimensions (in) (HxWxD): 9.34" (237.16 mm) x 7.09" (179.96 mm) x 8.76" (222.49 mm)

Features of MUD600.1:

  • Model: MUD600-1
    Description
  • Class D Mono Amplifier
    Primary Ratings*
  • Primary Power
  • 300 W RMS at 4Ω, 20-165Hz and ≤ 1% THD+N*
  • Signal-to-Noise Ratio: 85 dBA
  • Secondary Ratings*
  • Dynamic Power
  • 425 W at 4Ω, ≤ 1% THD+N
  • 650 W at 2Ω, ≤ 1% THD+N
    Features 
  • Input Level
  • 0.2 - 5V Low Level
  • 0.4 - 10V High Level
  • Frequency Response: 10Hz - 250 Hz
  • Low Pass Filter (LPF): 40-250Hz Variable
  • Minimum Load: 
  • Low Voltage Protection: Yes, Protect <8.5V
  • Components & PCB: SMD Parts / Double Sided FR-4 PCB
  • Dimensions
  • Height 1.85" (47mm)
  • Width 5.51" (140mm)
  • Length 7.36" (187mm)

FIT Guide:

  • 2014 - 2020 RZR 900
  • 2015 - 2020 RZR 900 XC
  • 2014 - 2018 RZR 2 900 EPS
  • 2014 - 2020 RZR 4 900 EPS
  • 2014 - 2020 RZR S 900
  • 2017 - 2020 RZR S 1000
  • 2019 - 2020 RZR S4 1000
  • 2014 - 2020 RZR XP 1000
  • 2016 - 2020 RZR XP Turbo
  • 2019 - 2020 RZR XP Turbo S
  • 2018 - 2020 RZR XP Turbo Dynamix Edition
  • 2014 - 2020 RZR XP 4 1000
  • 2016 - 2020 RZR XP 4 Turbo
  • 2019 - 2020 RZR XP 4 Turbo S
  • 2018 - 2020 RZR XP 4 Turbo Dynamix Edition
  • 2019 - 2020 RZR XP 1000 Trails and Rocks
  • 2014 - 2020 RZR XP 1000 High Lifter
  • 2014 - 2020 RZR XP 4 1000 High Lifter
Shipping & Returns

Row content