MTX RZR-14RC-THUNDER5 Front+Tower Speakers+Sub+Amps For Polaris RZR Ride Command

Features of RZR-14-FS:

• Integrated RGB LED Lighting
• Custom Fit for RZR® Kick Panel
• Custom Quick Mount Bracket with POD-LOC Technology for Easy Installation
• Rotationally Molded Sealed Enclosure
• Factory Matched Texture
• Polypropylene Woofer and Mylar Dome Tweeter
• Installer Friendly Design
• Direct Fit, No Cutting or Drilling Required

Specifications:

• RMS Power Handling: 50-Watts
• Peak Power Handling: 100-Watts
• Sensitivity (2.83V/1m): 89.9dB
• Sensitivity (1W/1m): 85.6dB
• Frequency Response: 70Hz - 20kHz
• Impedance: 4

 Features of MUD65PL:

• 2 MTX MUD65PL 6.5" 100w Tower Roll Bar LED Speakers For Polaris RZR/ATV/UTV/Jeep
• Fits Bars with Diameters of 1.5", 1.75", and 2"
• Polypropylene Woofer and Soft Dome Tweeter
• Internal Crossover Network
• ABS Impact Resistant Grille with UV Inhibitor
• Tested 500hrs to ASTM B117, D4329 Standard
• RGB LEDs in Grille Allow Selection of Red, Blue, or Green
• Optional Remote Control and Wiring Harness Available for Custom Color Creation (MUDLEDC)

Specifications:

• Description: 6.5" 2-Way Cage Mount Speakers
• RMS Power (Watts): 50
• Peak Power (Watts): 100
• Sensitivity: 86 dB
• Impedance: 4 Ohm
• Cone Material: Polypropylene
• Frequency Response: 70Hz - 20kHz
• Grille: Yes
• Environmental Spec: 500hrs ASTM B117, D4329
• Light: RGB LED In Grille
• Dimensions (in) (HxWxD): 9.34" (237.16 mm) x 7.09" (179.96 mm) x 8.76" (222.49 mm)

Features of MUD100.4:

• RMS Power @ 4 Ohms: 50 Watts x 4 Channel
• RMS Power @ 2 Ohms: 100 Watts x 4 Channels
• RMS Power Bridged @ 4 Ohms: 200 Watts x 2 Channel
• Peak Power Handling: 400 Watts
• Topology: Full Range Class D
• Weather Resistant: IP66 Rating
• THD: <0.2%
• Frequency Response: 10Hz - 32kHz
• Crossover: Fixed HPF/LPF @ 80Hz, 12dB/Oct
• Max Sensitivity: 200mV
• Maximum Input Signal: 5V
• Internal 4 x 50 Watt Power Amplifier
• Compact Design Enables Installation Anywhere
• Conformal Coated Printed Circuit Board that Resists Moisture
• Fixed Crossovers, High and Low Pass Allow Use with Full Range Speakers or Subwoofers
• Product Dimensions (H x W x D): 6.52" x 5.51" x 1.86" inches

Features of RZR-14-SW:

• Can Be Used as a Ported or Sealed Enclosure
• Includes an MTX 55 Series Subwoofer for its Deep Bass Reproduction Capabilities
• QuIPS (Quick Install Port Seal) Technology
• Mounts Behind Dashboard
• Factory Matched Texture
• Installer Friendly Design
• Direct Fit, No Cutting or Drilling Required

Specifications:

• 10" Loaded Subwoofer Enclosure
• RMS Power Handling: 400-Watts
• Peak Power Handling: 800-Watts
• Sensitivity (2.83V/1m): 90.2dB
• Sensitivity (1W/1m): 83.5dB
• Frequency Response: 28Hz - 130Hz
• Impedance: Dual 4

Features of MUD600.1:

• Model: MUD600-1
  Description
  
• Class D Mono Amplifier
  Primary Ratings*
  
• Primary Power
  
• 300 W RMS at 4O, 20-165Hz and = 1% THD+N*
  
• Signal-to-Noise Ratio: 85 dBA
  Secondary Ratings*
  
• Dynamic Power
  
• 425 W at 4O, = 1% THD+N
  
• 650 W at 2O, = 1% THD+N
  Features
  
• Input Level: 0.2 - 5V Low Level, 0.4 - 10V High Level
  
• Frequency Response: 10Hz - 250 Hz
  
• Low Pass Filter (LPF): 40-250Hz Variable
  
• Minimum Load: 2O
  
• Low Voltage Protection: Yes, Protect <8.5V
  
• Components & PCB: SMD Parts / Double Sided FR-4 PCB
  Dimensions
  
• Height: 1.85" (47mm)
  
• Width: 5.51" (140mm)
  
• Length: 7.36" (187mm)

Row content