MTX RZR-14-THUNDER5 Receiver+Front+Tower Speakers+Sub For Polaris RZR 1000/900

Features of AWMC3:

• MTX AWMC3 Marine Receiver with Bluetooth, AM/FM/WB/SiriusXM for Boat
  
• RMS Power @ 2 Ohms: 50 Watts x 4 Channels
  
• Line Output Impedance: 10k Ohms
  
• Line Output: 2V
  
• Cut Out Size: 3" inches
  
• Internal 4 x 50 Watt Power Amplifier
  
• 3" Full Color TFT Display
  
• SiriusXM® Radio Ready (SiriusXM Connect Vehicle Tuner and Subscription Sold Separately)
  
• AM / FM / WB Tuner
  
• Bluetooth® Audio Streaming
  
• Auxiliary Input
  
• USB Charging
  
• iPhone® - Unit Will Charge and Play Music Through USB
  
• Android® - Unit Will Charge, but Will NOT Play Music Through USB
  
• Unit Will Play Music and Display Album Artwork Using a USB Memory Stick (.mp3)
  
• Weather Resistant (IP66)
  
• 2 Sets of Pre-Outs (Front / Rear)
  
• Selectable EQ
  
• Backlit Control Buttons
  
• Product Dimensions (H x W x D): 4.31" x 4.31" x 4.25" inches
  

Features of RZR-14-FS:

• Integrated RGB LED Lighting
  
• Custom Fit for RZR® Kick Panel
  
• Custom Quick Mount Bracket with POD-LOC Technology for Easy Installation
  
• Rotationally Molded Sealed Enclosure
  
• Factory Matched Texture
  
• Polypropylene Woofer and Mylar Dome Tweeter
  
• Installer Friendly Design
  
• Direct Fit, No Cutting or Drilling Required
  

Specifications:

• RMS Power Handling: 50-Watts
  
• Peak Power Handling: 100-Watts
  
• Sensitivity (2.83V/1m): 89.9dB
  
• Sensitivity (1W/1m): 85.6dB
  
• Frequency Response: 70Hz - 20kHz
  
• Impedance: 4Ù
  

Features of RZR-14-SW:

• Can Be Used as a Ported or Sealed Enclosure
  
• Includes an MTX 55 Series Subwoofer for its Deep Bass Reproduction Capabilities
  
• QuIPS (Quick Install Port Seal) Technology
  
• Mounts Behind Dashboard
  
• Factory Matched Texture
  
• Installer Friendly Design
  
• Direct Fit, No Cutting or Drilling Required 
  

Specifications:

• 10" Loaded Subwoofer Enclosure
  
• RMS Power Handling: 400-Watts
  
• Peak Power Handling: 800-Watts
  
• Sensitivity (2.83V/1m): 90.2dB
  
• Sensitivity (1W/1m): 83.5dB
  
• Frequency Response: 28Hz - 130Hz
  
• Impedance: Dual 4Ù
  

Features of MUD100.4:

• MTX MUD100.4 400 Watt RMS 4-Channel Amplifier For Polaris RZR/ATV/UTV/Cart
  
• RMS Power @ 4 Ohms: 50 Watts x 4 Channels
  
• RMS Power @ 2 Ohms: 100 Watts x 4 Channels
  
• RMS Power Bridged @ 4 Ohms: 200 Watts x 2 Channel
  
• Peak Power Handling: 400 Watts
  
• Topology: Full Range Class D
  
• Weather Resistant: IP66 Rating
  
• THD: <0.2%
  
• Frequency Response: 10Hz - 32kHz
  
• Crossover: Fixed HPF/LPF @ 80Hz, 12dB/Oct
  
• Max Sensitivity: 200mV
  
• Maximum Input Signal: 5V
  
• Internal 4 x 50 Watt Power Amplifier
  
• Compact Design Enables Installation Anywhere
  
• Conformal Coated Printed Circuit Board that Resists Moisture
  
• Fixed Crossovers, High and Low Pass Allow Use with Full Range Speakers or Subwoofers
  
• Product Dimensions (H x W x D): 6.52" x 5.51" x 1.86" inches
  

Features of MUD65PL:

• 2 MTX MUD65PL 6.5" 100w Tower Roll Bar LED Speakers For Polaris RZR/ATV/UTV/Jeep
  
• Fits Bars with Diameters of 1.5", 1.75", and 2"
  
• Polypropylene Woofer and Soft Dome Tweeter
  
• Internal Crossover Network
  
• ABS Impact Resistant Grille with UV Inhibitor
  
• Tested 500hrs to ASTM B117, D4329 Standard
  
• RGB LEDs in Grille Allow Selection of Red, Blue, or Green
  
• Optional Remote Control and Wiring Harness Available for Custom Color Creation (MUDLEDC)
  

Specifications:

• Description: 6.5" 2-Way Cage Mount Speakers
  
• RMS Power (Watts): 50
  
• Peak Power (Watts): 100
  
• Sensitivity: 86 dB
  
• Impedance: 4 Ohm
  
• Cone Material: Polypropylene
  
• Frequency Response: 70Hz - 20kHz
  
• Grille: Yes
  
• Environmental Spec: 500hrs ASTM B117, D4329
  
• Light: RGB LED In Grille
  
• Dimensions (in) (HxWxD): 9.34" (237.16 mm) x 7.09" (179.96 mm) x 8.76" (222.49 mm)
  

Features of MUD600.1:

• Model: MUD600-1
  Description
  
• Class D Mono Amplifier
  Primary Ratings*
  
• Primary Power
  
• 300 W RMS at 4Ω, 20-165Hz and ≤ 1% THD+N*
  
• Signal-to-Noise Ratio: 85 dBA
• Secondary Ratings*
  
• Dynamic Power
  
• 425 W at 4Ω, ≤ 1% THD+N
  
• 650 W at 2Ω, ≤ 1% THD+N
  Features 
  
• Input Level
  
• 0.2 - 5V Low Level
• 0.4 - 10V High Level
  
• Frequency Response: 10Hz - 250 Hz
• Low Pass Filter (LPF): 40-250Hz Variable
• Minimum Load: 2Ω
• Low Voltage Protection: Yes, Protect <8.5V
• Components & PCB: SMD Parts / Double Sided FR-4 PCB
• Dimensions
  
• Height 1.85" (47mm)
  
• Width 5.51" (140mm)
  
• Length 7.36" (187mm)

FIT Guide:

• 2014 - 2020 RZR 900
  
• 2015 - 2020 RZR 900 XC
  
• 2014 - 2018 RZR 2 900 EPS
  
• 2014 - 2020 RZR 4 900 EPS
  
• 2014 - 2020 RZR S 900
  
• 2017 - 2020 RZR S 1000
  
• 2019 - 2020 RZR S4 1000
  
• 2014 - 2020 RZR XP 1000
  
• 2016 - 2020 RZR XP Turbo
  
• 2019 - 2020 RZR XP Turbo S
  
• 2018 - 2020 RZR XP Turbo Dynamix Edition
  
• 2014 - 2020 RZR XP 4 1000
  
• 2016 - 2020 RZR XP 4 Turbo
  
• 2019 - 2020 RZR XP 4 Turbo S
  
• 2018 - 2020 RZR XP 4 Turbo Dynamix Edition
  
• 2019 - 2020 RZR XP 1000 Trails and Rocks
  
• 2014 - 2020 RZR XP 1000 High Lifter
  
• 2014 - 2020 RZR XP 4 1000 High Lifter

Row content