ALPINE X-W10D4 10" 900w Car Subwoofer+Sealed Box+X-A90M Mono Amplifier+Amp Kit
Product Description
- (1) Alpine 10" Car Audio Subwoofer
- (1) Rockville Single 10” 0.75 cu.ft. Sealed Bedlined Car Sub Enclosure Box
- (1) Alpine X-A90M 900 Watt Mono X-Series Car Audio Amplifier Class-D Amp
- (1) Rockville RWK4CU 4 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
Description of X-W10D4:
OVERVIEW
The New X-Series subwoofers were developed from a sound philosophy we call
Alpine ID – a focus on highly accurate components built for superior imaging. A
triple stacked magnet surrounds an extended voice coil which allows a very long
excursion resulting in huge air movement.
A specialized CRC pole with integrated
cooling fins and an aluminum shorting cap reduce the lag of coil’s alternating
movement while also providing cooling within the motor. The cone structure is
suspended by two spiders and our patented H.A.M.R. surround. The stability of
the dual-spider along with the even unfolding of the multi-roll surround create
incredibly linear cone travel, free of any unneeded movement that cause
distortion.
The powerful and efficient motor coupled with its highly-controlled suspension
give the X-Series subwoofer the ability to create loud and accurate bass in a
very small, sealed box. Only requiring 1 cubic foot of air space (.55 for the
10”), the 12” X-Series subwoofer can reproduce frequencies down to 40 Hz before
rolling off, leaving you with bass that digs deep and plenty of trunk space.
The new X-Series subwoofers are the X-W12D4 12-inch Dual 4 Ohm and the X-W10D4
10-inch Dual 4 Ohm.
CRITICAL EVALUATION OF IN-CAR SOUND
Alpine’s top engineers from all over the world gathered in Alpine headquarters
to deeply research and evaluate sound systems from both the aftermarket and
high-end OE manufacturers. Many systems today have incredible dynamic range and
reach sufficient volume levels, but lacked the reality of instruments and
spatial imaging. As a result, Alpine ID was born, a sound philosophy that
continues to inspire us to create a new level of sonic performance.
ALPINE: IMAGE DEFINED
Or Alpine ID for short, is the new Alpine global sound culture with an
evolutionary approach for solving what’s missing in most car audio systems these
days: great spatial imaging and depth of sound stage. It centers on developing
matched sound systems with core components that work together to achieve greater
realism in the sound stage while maintaining great dynamic range and accuracy.
BUILT TO MOVE TONS OF AIR
The 24mm Xmax is best in class and allows close to 2 inches of full cone motion.
In order to create a powerful yet accurate subwoofer, we had to implement
several technologies that keep the cone under control. Dual spiders ensure a
rigid moving assembly while the HAMR surround provides long linear travel. A
shorting ring keeps the THD down while a custom heat sink integrated CRC pole
and shorting cap keeps high magnetic force. These design aspects come together
to produce incredibly precise, powerful bass.
EASY GRILLE AND TRIM RING INCLUDED
Taking design cues from tweeter development, we’re incorporating a twist-lock
trim ring which allows easy attachment of the included metal mesh grill. With a
simple twist, the trim ring locks into place, concealing the mounting screws and
locking the optional grille into place. The trim can be installed with or
without the grille.
THE PERFECT PAIR PERFECT POWER MATCHING
The X-Series amplifier, X-A90M, is the perfect amplifier for the job. Along with
the 900w power matched specifications of both components, each were built under
the same sound philosophy, Alpine ID. With a focus on musicality and sound
imaging, the X-W10D4 is complimented by the amplifiers clean, low distortion
output and >1500 damping factor. Add the X-Series speaker to the system and
prepare to experience a new level of in-car imaging.
Features:
- ALPINE X-W10D4 10" 900 Watt RMS Car Audio Subwoofer DVC Dual-4ohm X-Series Sub
- Alpine ID Sound Quality
- 900W RMS, making it a perfect match for the X-Series X-A90M 900W mono amplifier
- 24mm linear Xmax (1 way), 48 mm peak to peak
- Dual spiders for precision control over the large dynamic range
- Dual shorting rings for strong motor control ensuring low THD and tight bass
- Center pole radial heat sink which wicks heat away from the voice coil and transfers it outside the motor, for long term high output
- The biggest HAMR surround yet, for linear cone movement throughout its large range of excursion
- Light but rigid pulp/mica cone which allows for highly accurate bass with great natural tone
- Twist-lock Trim ring with full mesh grill included
- Frequency Response: 24Hz-200Hz
- Mounting Depth: 6-3/4"
- Cutout Diameter: 9 1/16"
Description of X-A90M:
Hear and feel the music like you never have before with X-Series Amplifiers.
CRITICAL EVALUATION OF IN-CAR SOUND
Alpine’s top engineers from all over the world gathered in Alpine headquarters
to deeply research and evaluate sound systems from both the aftermarket and
high-end OE manufacturers. Many systems today have incredible dynamic range and
reach sufficient volume levels, but lacked the reality of instruments and
spatial imaging. As a result, Alpine ID was born, a sound philosophy that
continues to inspire us to create a new level of sonic performance.
ALPINE: IMAGE DEFINED
Or Alpine ID for short, is the new Alpine global sound culture with an
evolutionary approach for solving what’s missing in most car audio systems these
days: great spatial imaging and depth of sound stage. It centers on developing
matched sound systems with core components that work together to achieve greater
realism in the sound stage while maintaining great dynamic range and accuracy.
KEEPING THE HEAT DOWN WHILE FAITHFULLY
REPRODUCING MUSIC
At the core of the X-Series Amplifier’s chassis is a solid cast aluminum heat
sink which keeps the amplifier cool when performing at its peak power levels.
Excess heat is removed from the amplifier through the newly designed heat sink
profile which both improves airflow and increases surface cooling area. The
fan-less channels located on both sides of the amp allow for convection flow of
air; hot air naturally rises out from the top of the amplifier, which causes a
vacuum that sucks in cool air from below. This smart design allows for
continuous thermal control for an uninterrupted listening experience.
PROVEN POWER
X-Series Amplifiers come with their very own birth sheet which reveals each
amplifier’s true power rating.
HIGH PERFORMANCE WHILE RETAINING CLASS-LEADING POWER DENSITY
X-Series amplifiers are built on a new Alpine-proprietary circuit design that
achieves class-leading power density and reliability while performing at the top
of its class. By simplifying the circuit topology, Alpine is able to ensure the
cleanest possible signal path. While the simplicity of the circuit contributes
to a great sounding signal, we added an exclusive dual feedback loop that
corrects signal distortion. This clever design results in a frequency response
that not only meets the Hi-Rez audio standard of 40kHz but even extends up to
60kHz. The amp maintains a very low phase shift throughout the music spectrum
which allows your music stay faithful to the original recording with realism
that puts you in the center of the performance.
X-A90M
Features:
- ALPINE X-A90M 900 Watt Mono X-Series Car Audio Amplifier Class-D Amp
- Alpine ID Sound Quality
- Class-D Performance
- Rotatable Illuminated Alpine Badge
- Top-Side Control Panel
- Built-in Crossover & Bass EQ
- Remote Bass (RUX-KNOB or RUX-KNOB.2) Compatible
Specifications:
- CTA-2006 Power Rating:
- 900W RMS x 1 (2O,<1% THD+N, 14.4V)
- 600W RMS x 1 (4O,<1% THD+N, 14.4V)
- S/N:90dBA (ref: 1W into 4O)
Video of RWK4CU:
We challenge anyone to put this wire to a resistance test against any other wire on the market with the same gauge. If our cable does not meet or exceed any other cable, even if it costs 3 times more, we will be happy to call tag the item and refund you in full. Why are we so confident ? This cable is 100% copper. You cant have a cable with more than 100 % copper. So the only way a cable would out-perform this one is if it were being advertised as a 4 AWG but they are giving you more wire than advertised. No brands selling 100 % copper cables actually do this.
We guarantee that this kit will compete with the most expensive amp kits
on the market from Kicker, JL Audio, or any other top brands.
Maximum Power!
Looking for a wire kit that has 100% true specifications! A wire kit
that uses 100% copper 4-gauge cable! Then look no further than the
Rockville True-Spec RWK4-CU 4 Gauge Amplifier Wiring Installation
Kit. This package includes everything you'll need to get your amplifier
system powered-up correctly and at peak efficiency. All items included in this kit are top of the line.
The power and ground cables aptly named “Mega Power Cable” is a no
compromise power cable. Rockville’s engineering team over-built and
designed the cables using thousands of strands of only true 100%
oxygen-free, silver-tinned copper strands. The use of a proprietary
special twisting process reduces “surface skin impedance loss” so that
Mega Power cables have zero signal and power loss, delivering full power
from your battery system to your amplifier even at lengths of 20 feet!
The increased current flow and higher amperage carrying capacity will
increase your amplifiers efficiency and keep your amplifier running
cooler. The SuperFlex outer insulating jacket jacket makes installation
and cable routing simple and easy. The 100% copper stranded wire is
extremely tolerant of the hostile conditions found under the hood in
vehicles and compensates for vibration, heat expansion and flexibility.
This flexible and well-shielded wire is crucial for getting through all
of the nooks and passageways within the confines of a vehicle interior.
Some manufactures use all aluminum or mix a little copper with aluminum
to give their cables the appearance of a “heavy-duty” cable. But not
Rockville, our True-Spec 100% oxygen free, silver tinned copper
eliminates corrosion, increases current transfer x 10, and won’t
discolor over time.
The superior quality and materials of the Rockville 100% True-Spec
amplifier installation kit is realized in the included accessories and
cable workmanship. Included is a precision CNC cut full size ANL fuse
housing, machined from solid brass and then 14K gold plated for superior
signal transfer and complete with a matching gold plated 120-amp ANL
fuse. The power cable is wrapped in 6 feet of durable nylon braided
tubing to protect it from heat and chafing in the engine compartment.
All installation accessories such as the ring terminals and spade
connectors are nickel plated for superior signal transfer and
durability.
CRYSTAL SQ AUDIO PLANAR SPEAKER CABLE
The speaker cable included in the Rockville True-Spec is also
manufactured from 100% copper and woven in to a flat planner design and
coated in our Super-Flex insulation so that it fits under and around
your vehicles trim and carpet smoothly and without bulking up. With
crystal clear sound quality these speaker cables deliver true audio
fidelity from your car audio amplifier to your speakers. The 14-gauge
speaker cable included in the 4-gauge kit can handle over 2000 watts of
power without heating up or degrading signal quality.
CRYSTAL SQ RCA AUDIO INTERCONNECT CABLE
Designed and engineered to be the best sounding, best performing and
best looking RCA cables available today. Each channel in the RCA cable
is triple shielded first with dielectric internal insulators and then
with a 98% coverage woven shield. All cables are manufactured of 100%
oxygen free copper and feature twisted pair technology for superior
noise rejection and pure sonic signal flow. The RCA plugs are shielded
metal and feature a spiral cut outer ground ring with center split pin
for precise and tight audio connections. The result of all this
technology is noise free-noise rejection signal transfer for optimum
sound quality. You will hear the difference these RCA signal transfer
cables will make.
-
Rockville RWK4CU 4 Gauge 2 Channel Complete Car Amplifier Installation Kit 100% Pure Copper RCA Cables
- 4 Gauge Power Amplifier Installation Kit
- Designed specifically for car audio systems over 1000 watts RMS to 2000 Watts
- Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
- The solid brass gold plated Mini ANL Fuse Holder offers ideal protection for high powered systems
- Strand Count: 1862
- BC-5W2 Compliant
- 17 ft. Frosted Blue 4 gauge power wire with seamless crimp ring terminal
- 3 ft. Frosted Gray 4 gauge ground wire
- 17 ft. Blue 18 gauge remote lead wire
- 25 ft. Frosted Clear/Blue 14 gauge flat speaker wire
- 17 ft. Triple shielded twisted pair RCA cables
- One Mini ANL Fuse Holder with 120 amp ANL fuse
- One 1/2“ black rubber firewall grommet
- One 4 gauge spade terminal
- Two black 12 gauge nickel-plated spade lugs
- Three blue 12 gauge nickel-plated spade lugs
- One black 4 gauge ring terminal
- Ten 6” black zip ties
Description of RS10B:
The RS10B single sealed speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!
MADE IN THE USA WITH PRIDE!
Features:
- Rockville RS10B Single 10” 0.75 cu.ft. Sealed Bedlined Car Sub Enclosure Box
- Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
- 3/4" USA Heavy Duty MDF Construction
- Machine precision cut mounting holes
- Top of the line Glue for extra durable adhesion
- High quality GOLD screw down terminals
- Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
- Covered and Finished with a Durable Bed Liner Coating
Enclosure Measurements:
- Type of Enclosure: Sealed
- Enclosure Sub Size: Single 10"
- Dimensions in Inches: 10.5" L x 13.5" W x 13.5 H"
- Top and Bottom Depth: 10.5"
- Mounting Depth: up to 9" (enough depth for any sub on the market)
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 1.0 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 0.75 Cubic Feet
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville sub enclosures are backed with a full 90 day warranty, though it is unlikely that you will need to use it.
Complete Single Subwoofer Enclosure Installation Kit!
Includes:
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
Shipping & Returns
Row content
