Rockville PRO-D7 KIT 7 Drum Mics w/Kick+Snare+Pencil Microphones+Stands+Cables
Product Description
- (1) Rockville PRO-D7 KIT 7 Mic Drum Kit w/Bass+Snare+Condenser Overhead Microphones
- (1) Rockville Kick Drum/Guitar Amp Mic Stand, Steel Round Base+Fixed Boom+Rubber Pad
- (1) Rockville RVMIC4 Round-Base Microphone Stand With Quick Release Hand Clutch
- (1) Samson Stand Mount Dual Mics Microphone Adapter For (2) Microphones
- (7) Rockville RCXFM20E-B 20 Foot Female to Male XLR Mic Cable Black 100% Copper
HOW To Set Up Your PRO-D7 KIT:
What’s Included:
- (1) Bass drum mic
- (4) Snare drum mics
- (2) Overhead condenser mics
- (7) Mic clips
- (1) Aluminum travel/protective case with foam
- Manual
- Warranty card
Features of PRO-D7 KIT:
Steel grill
Snare Drum Microphone:
- Steel grill
- Aluminum body
- Zinc alloy hardware
- Fits any mic stands
- Anti-wind filter inside the grill
- Element: Dynamic
- Polar Pattern: Cardioid
- Large diaphragm delivers accurate frequency response
- Frequency response is engineered to be perfect for tom-toms and snare drums
- Studio quality performance make these perfect for recording or live shows
- Sounds great even at high SPL levels
- Rejection of unwanted noises
- XLR Output
- Mounting hardware has a swivel joint with quick release latch for easy and flexible positioning
- Frequency Response: 60Hz-13KHz
- Sensitivity: -54dB±3dB (0dB=1V/Pa at 1KHz)
- Output Impendence: 600O ±30% (at 1kHz)
- Microphone Length: 4.53 inches
- Microphone Max. Diameter: 1.61 inches
- Microphone Weight: 0.44 Lbs
Overhead Condenser Microphones:
- Overhead cardioid condenser microphone
- Steel grill
- Aluminum body
- Anti-wind filter inside the grill
- Element: condenser
- 16 MM large diameter cartridge has amazing sound
- Polar Pattern: Cardioid
- Large diaphragm delivers accurate frequency response
- Frequency response is extremely flat and engineered to be perfect for cymbals and other drums
- Studio quality performance make these perfect for recording or live shows
- Sounds great even at high SPL levels
- Rejection of unwanted noises
- XLR Output
- Mounting hardware has a swivel joint with quick release latch for easy and flexible positioning
- Low mass diaphragm
- Frequency Response: 70Hz-20KHz
- Sensitivity: 13mV/Pa
- Output Impendence: 2000 Ohms (at 1kHz)
- Max SPL: 127dB(at 1kHz=1% T.H.D)
- S/N ratio: 96dB
- Power Supply: Phantom 48V or DC1.5V
- Microphone Length: 8.46 inches
- Microphone Max. Diameter: 1.06 inches
- Microphone Weight: 0.22 Lbs
Features for Case:
- Aluminum case holds all the microphones and mounts
- Protective foam makes sure your mics stay in perfect condition when you travel
- Carry handle makes it easy to carry the case from gig to gig
- High quality case with good looking design
- Buckle latch secures the case closed
- Protective foam is molded for each microphone and clip
- Dimensions of case: 19.1” x 13.4” x 3.94” inches
How To Set Up Your RKDS:
Videos of RKDS:
Description:
The RKDS is a multi-purpose mini mic stand. The most popular use of these are for kick drum mic stands, but there are so many other amazing uses for these. They really come in handy for any amp or instrument that has to be on the ground. You can use these to mic up a bass drum, kick drum, snare, guitar amp, or bass amp. (Certain bass players prefer to have a mic). These are also perfect for floor stage mics, as a desk mic, or for use on the dais table at parties and corporate events. Additional uses are for a stand-up bass, or for saxophone players (sitting). There is so many ways these little stands come in handy.
Our stand weighs twice as much as others on the market because these are super-sturdy and solid. The RKDS has a 10.2” Steel Round Base with a rubber pad that eliminates unwanted noises. It has a 21.4" fixed boom arm that provides precise positioning for your mic.
The stand adjusts from 18.7” to 28.7”. This bad-boy Weighs in at 6.6lbs. There is no better stand in its class at this price guaranteed!
And we topped it off with a scratch-resistant powder coated finish so the stand looks beautiful for life!
This uses a standard thread size of 5/8”inch.
Features:
- Rockville Kick Drum/Guitar Amp Mic Stand With Steel Round Base, Fixed Boom and Rubber Pad
- Low profile height adjustable microphone stand for kick drums and guitar amps
- Heavy-duty steel round base with rubber pad provide extreme stability
- Fixed boom arm provides precise positioning
- Scratch-resistant powder coated finish
Specifications:
- Booming length : 21.4" (54.5cm)
- Height adjustment : 18.7"- 28.7" (47.5cm – 73cm)
- Base Diameter : 10.2" (26cm)
- Thread Size : 5/8"
- Weight : 6.6 lbs (3 kgs)
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.
How to Set Up Your RVMIC4:
Videos of RVMIC4:
Description:
The Rockville RVMIC4 mic stand is extremely rugged and tough! This is one of the most sturdy stands on the market. It also offers the most convenient features on the market.
This mic stand has a clutch system that allows you to instantly raise or lower the stand with one hand. It is the most convenient way to adjust a mic stand ever!
This stand is built so you can throw it around! It is one of the thickest stands on the market! Most brands do not advertise how thick their tubing is, but we do! Our 1 inch diameter thick steel tubing is unmatched by any other brands! The joints we use are made of aluminum. Almost all competing products use plastic. We use a very heavy duty round base that’s got some serious weight to it! This makes the stand very sturdy. The diameter of the base is 9.84” inches. To give you an idea of how heavy-duty this stand is, it weighs in at 8.8 lbs. This stand is rock solid and un-breakable!
For added convenience we added wire clips that allow you to route the wire cleanly. If you own a concert hall or just want the best performing stand on the market, then this is the stand for you.
Features:
- Rockville RVMIC4 Professional Round-Base Microphone Stand With Quick Release Hand Clutch
- One-hand adjusting using the hand-clutch system (no need to turn knobs to adjust!)
- Adjustable Height Range: 43-69 inches
- Aluminum leg joints
- This mic stand is the easiest and quickest to adjust on the market!
- The stand tubes are 25 mm thick for the bottom tube, and 18mm for the top tube. This is about 50 % thicker than almost all other brands on the market making this one of the sturdiest stands in the world
- 100% steel construction and Aluminum joints! NO Plastic parts!
- Virtually Unbreakable (under normal use)
- Cable guiding clip on the stand for running cables
- Black Color
- Top Tube Diameter: 0.75" inch
- Lower Tube Diameter: 1" inches
- Round base with a diameter of 9.84” inches
- This rock solid stand weighs in at 8.8 LBS!
Authorized Samson Dealer!
Description of SADMA2:
Mic In Stereo.
The Samson DMA2 Dual Microphone Adapter is the ideal accessory for utilizing
stereo mic'ing techniques when recording, especially for orchestras, choirs and
various other live and studio situations. The predominantly steel-constructed
DMA2 can be connected to the top of any standard mic stand thanks to 5/8"-27
threading. From there, the adapter can hold two separate microphones via mic
clips or boom arms with its 3/8" locking screws. These two screws can be
adjusted to provide not only 360° of individual mic rotation, but also 2"–7"
separation between the two mics. This allows you to find the appropriate mic
placement for your particular recording application.
Features:
- SAMSON Stand Mount Dual Mics Microphone Adapter For (2) Microphones
- Dual microphone adapter ideal for stereo mic'ing techniques
- Holds two mics (via mic clips or boom arms) with 3/8" locking screws
- Adjustable screws offer 360° mic rotation and 2"–7" of mic separation for optimal placement
- Connects to the top of any standard mic stand
- 5/8"-27 mic stand threading
- Steel construction
Advantages of buying from an authorized seller:
- Best prices - We sell all Samson Products at great prices
- Full Factory Warranty
- Lifetime Customer Service by Samson product experts
- Guaranteed legitimate and authentic merchandise
Please note: If you purchase Samson from an un-authorized seller then you are taking a big risk. You will not have any manufacturer warranty, and there is no guarantee that the item is authentic, brand new, or even working.
Video of RCXFM20E-B:
Description:
All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.
The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable’s copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.
Features:
- Rockville RCXFM20E-B Black 20 Foot Nickel Plated Female to Male XLR Microphone Cable
- XLR Connectors with Internal Strain Relief for Rugged Reliability
- 100% Copper Conductors for Enhanced Signal Clarity
- 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
- Length: 20 Ft
- Color: Black
Shipping & Returns
Row content
