Audio Technica BPHS1 Over-Ear Broadcast Headset w/boom+Studio Mic+Headphones

Package Includes:

• (1) Audio Technica BPHS1 Over-Ear Broadcast Stereo Headphones Headset w/boom Mic
• (1) Rockville RCM01 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
• (1) Rockville PRO-M50 Studio Headphones+Detachable Coil Cable+Case+Extra Ear Pad

---

Authorized Audio Technica Dealer! 

Description of BPHS1:

Created especially for on-air news & sports broadcasting, announcing & interviews, this rugged stereo headset offers natural, highly intelligible and focused vocal reproduction, closed-back circumaural (around-the-ear) ear cups to seal out background noise, and a high-output dynamic microphone mounted on a flexible gooseneck boom.

The headset’s microphone has a cardioid polar pattern tailored for pickup of speech with maximum voice intelligibility over a wide range of frequencies. It is more sensitive to sound originating directly in front of the element, making it useful in reducing pickup of unwanted sounds. The flexible gooseneck boom swivels for easy positioning on either the right or left side.

Features:

• Audio Technica BPHS1 Over-Ear Broadcast Stereo Headset w/ Boom Mic
• Microphone features polar pattern and frequency response tailored for natural, highly intelligible vocal reproduction
• Closed-back circumaural ear cups help seal out crowd noise and other background distractions
• Neodymium magnets in microphone and headphones for high output level & detailed sound reproduction
• Cardioid pickup pattern of the dynamic microphone rejects off-axis sounds
• Boom-mounted microphone can be positioned on the left or right side
• Adjustable cushioned headband and lightweight design for long-wearing comfort
• Rugged design with user-replaceable cable and ear pads
• Detachable cable (BPCB1) terminates in 3-pin XLRM-type connector for microphone and ¼” 3-conductor for headphone
• Headphone Type: Closed-back Dynamic
• Microphone Type: Cardioid Dynamic
• Headphone Driver Diameter 40 mm
• Headphone Magnet: Neodymium
• Voice Coil: Copper-clad aluminum wire
• Headphone Frequency Response: 20 Hz - 20 kHz
• Microphone Frequency Response: 40 Hz - 20 kHz
• Maximum Input Power: 1,600 mW at 1 kHz
• Headphone Sensitivity: 100 dB
• Microphone Sensitivity: -57 dB (1.4 mV) re 1V at 1 Pa
• Headphone Impedance 65 ohms
• Microphone Impedance: 560 ohms
• Product Weight: 264 g (9.3 oz)
• Product Dimensions:
  • 82.0 mm (3.23") wide (earcup);
  • 46.0 mm (1.81") wide (headband);
  • 180.1 mm (7.09") long (boom), microphone extended;
  • 24.0 mm (0.94") diameter (microphone)
• Cable: 3.3 m (10.8') long with 8-pin connector at headset end; 3-pin XLRM-type connector (microphone) and 6.3 mm (1/4") phone plug (headphone) outputs
• Accessories Included: 3 Windscreens, Spare Connector Screw

---

How to Setup a Rockville Condenser Microphone with Your Computer:

Video of RCM01:

Unboxing Video of RCM01:

The Rockville RMC01 condenser microphone performs better than famous branded microphones that cost over $100.

Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM01 amazing in studio applications.

The full metal construction makes the RCM01 tough enough for Live sound applications as well!

Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!

Quality built inside and out!
The microphone is made of all metal. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ – 20KHZ!  The mic sounds crystal clear sound with no distortion!

The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.

The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.

Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.

What's Included:

• RCM01 Condenser Microphone
  
• 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device we need to update on ebay amazon, website, etc
  
• 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
  
• Metal shock mount
  
• Anti-wind foam cap
  
• Owners Manual
  
• Warranty card
  

Features:

• Rockville RCM01 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
• RCM01 condenser microphone
  
• Full metal high quality construction
  
• Polar Pattern: Internally Polarized Condenser Cardioid Design
  
• Large diaphragm for smooth, natural sound and low noise
  
• Power Requirements: 48V DC Phantom Power
  
• Uni-directional
  
• Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ)
  
• Output impedance: 200O±30%(at 1kHz)
  
• Standard operating voltage: 3V
  
• Operating voltage range: 1.5V-10V
  
• Current consumption: less than 500uA
  
• Voltage deduction characteristic: within 3dB at 2V
  
• S/N ratio: More than 24dB
  
• Frequency Response: 30Hz - 20 KHz
  
• Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz
  
• Load impedance: Greater or = to 1000 Ohms
  
• Equivalent Noise level: Less than 18dB A (IEC581-5)
  
• Max. Input SPL: 126dB(THD=1.0% at 1kHZ)
  
• Electrical current: Greater than 4.8Ma
  
• Microphone body net weight:325 Grams (0.72 Pounds)
  
• Microphone Max.diameter 48mm (1.89” inches)
  
• Microphone Length 157mm (6.18” inches)
  
• Microphone material: steel grille + Zinc alloy (handheld part)
  
• PCB Layout: Surface mount

---

Includes:

• PRO-M50 headphones
• Detachable cable
• Soft suede and leather ear cushions (interchangeable)
• Leather hard travel protective case
• Gold plated ¼" adapter

All About Your PRO-M50:

Description:

Rockville brings you studio quality headphones and at an incredible price with its new PRO-M50 headphones. These are professional grade headphones that are guaranteed to ourperform headphones that cost triple the price! These feature ergonomically designed swiveling cups with interchangeable soft suede or leather finish cushions (included). The ear cups seal tight for excellent sound isolation and minimal bleed. Inside these cups you'll find 40mm Neodymium drivers delivering accurate audio with an extended frequency range for clear and rich bass, and a full frequency range of mids and highs. These are closed back style headphones specifically designed for studio monitoring. These play back the sound with a flat frequency curve so you can hear your music exactly how it was recorded. With the PRO-M50 you can expect to hear every detail of every song with extreme accuracy. These headphones cover full frequency ranges; even extending a bit past the frequencies that the human ear can hear.

The headband is made of soft leather, offering ultimate comfort even after extended wear. The beautifully designed stainless steel headband frame and arms are strong and durable. A detachable 51" coiled 100% Oxygen Free Copper cable with a gold plated 3.5mm plug is included along with a gold plated ¼" adapter to ensure the best possible signal. A hard leather case is included to store and protect your new investment when you are on the go.

Amazing sound quality will make these your go-to headphones whether in the studio or out and about!

Features:

• Rockville PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad
• Professional High-Definition Studio Headphones
• 40mm Neodymium drivers
• Ergonomically designed swivel ear cups
• Supreme sound isolation
• Accurate sound reproduction
• Minimal bleed
• Sturdy and durable steel headband and arms
• Soft leather headband cover
• Interchangeable leather and soft suede ear cups covers included
• Detachable 51" coil cable made of 100% Oxygen Free Copper (158" fully extended)
• Gold plated 3.5mm connector
• Gold plated ¼" adapter
• Hard leather carrying case
• Stainless steel headband frame and moving arms are durable and long-lasting

Specifications:

• Style: Closed-Back
• Design: Circumaural
• Transducer Type: Dynamic
• Driver: 40MM
• Sensitivity: 97±3dB
• Impedance: 32ohm
• Frequency Response:10Hz - 25KHz
• Max. Power: 600MW
• Rating Power: 260MW
• Net Weight: 290g (with cable)

Row content