JBL SRX910LA AF Array Frame For SRX910LA Speaker+Audio Technica Wireless Mic

Package Includes:

• (1) JBL SRX910LA AF Array Frame For SRX910LA Speaker to Support Up to (16) Cabinets
• (1) Audio Technica ATW-902a Wireless Handheld Microphone Mic 169.505 - 171.905 MHz

Description:

The SRX910LA AF is a lightweight and compact array frame for suspending SRX910LA arrays. The array frame was designed to work with single-point and front-back suspension methods. For single-point applications, the array frame can be used in conjunction with the VTX RC500 rotating clamp, allowing smaller SRX910LA arrays to be suspended from standard size trusses or pipes. The two-piece design is comprised of one extension bar and one spreader bar. The extension bar can extend to the front or rear of the frame to accomodate both uptilt and down tilt aiming options. Three connection points are available for attaching the extension bar to the spreader bar, allowing for precise control of shackle positioning for single-point applications. Support for third-party inclinometers is available using the included laser attachment bracket. The two parts can be collapsed easy for storage. For more information about the array frame and use cases, refer to the SRX900 Series Rigging Manual.

Features:

• Compact and lightweight design
• Precision pick-point resolution
• Two-part collapsible design
• Support for third-party laser inclinometers
• Support for up to (16) SRX910LA
• Compatible shackle size: 1/2 in

Specifications:

• Construction: High-grade steel with anti-corrosion coating
• Finish: Black powder coat
• Compatible Shackle Size: 1/2-inch
• Compatible Lasers: TEQ-SAS, RECLINE
• Mechanical Limits1
• Safe Limit: (14) SRX910LA
• Maximum Limit: (16) SRX910LA
• Dimensions (H x W x D)2: 3.9 in x 19.2 in x 25.8 in
• Net Weight3: 4.1 kg (9 lbs)
• Shipping Weight: 5.0 kg (11 lbs)

Authorized Audio Technica Dealer!

Description:

Audio-Technica's System 9 is a four-channel frequency-agile wireless system designed to provide rock-solid performance along with easy setup and clear, natural sound quality. Featuring sleek, stackable, contemporary styling, System 9 is available in a head worn configurations. The system offers four compatible user-switchable VHF channels.

Each System 9 configuration includes the ATW-R900a receiver and either a body-pack transmitter or handheld microphone/transmitter. The ATW-R900a is a non-diversity, single-channel receiver with advanced dipole antenna design for extended operating range, which improves operation by providing a ground element in addition to the usual signal element. The ATW-R900a also offers volume control along with AF Peak, RF and Power indicator lights.

Features:

• Audio Technica ATW-902a Wireless Handheld Microphone 169.505 - 171.905 MHz
• Easy Operation and Clear, Natural Sound Quality
• 4 Selectable Frequency-Coordinated VHF Channels
• Balanced XLR and Unbalanced 1/4" Output Jacks enable use with a wide variety of audio gear
• Reliable performance and durable construction
• Advanced dipole antenna system for extended operating rang
• Operating Frequencies: VHF High Band, 169 MHz to 172 MHz
• Modulation Mode: FM
• Maximum Deviation: +/- 10 kHz
• Dynamic Range: >/= 90dB (A-Weighted), typical
• Total Harmonic Distortion: < 1% (at 1 kHz, +/- 10 kHz deviation)
• Operating Range: 200' feet
• Operating Temperature Range: 40° F - 110° F
• Frequency Response: 80 Hz - 13 kHz

Receiver Specifications:

• Receiving System: Non-diversity, single-channel, dual antenna system
• Image Rejection: 50 dB minimum
• RF Sensitivity: 20 dBuV at 60 dB S/N ratio (50 ohms termination)
• Audio Output: Nominal Output Level
  • XLR, balanced: 350 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load)
  • 1/4" (6.3 mm), unbalanced: 700 mV (1 kHz modulation, 10 kHz deviation, 100k ohm load)
• Power Supply: 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply
• Dimensions (W x H x D): 7.48" x 1.82" x 5.06" inches
• Net Weight: 12.0 oz
• Accessory Included: Power Supply

Body-Pack Transmitter Specifications:

• RF Power Output: 10 mW
• Spurious Emissions: Following federal and national regulations
• Batteries: Two 1.5V AA (not included)
• Battery Life: 8 hours (alkaline)
• Dimensions: 9.91" inches (long), 2.11" inches (diameter)
• Net Weight: 9.2 oz.
• Accessory Included: AT8456a Quiet-Flex Stand Clamp

Row content