JBL VMA1240 Commercial/Restaurant Receiver+4) Wall+20) Ceiling Speakers in White

Name: JBL VMA1240 Commercial/Restaurant Receiver+4) Wall+20) Ceiling Speakers in White
Brand: JBL
SKU: VMA1240+(2) WET-7020W+(5) CCL5T WHITE
Price: 869.85 USD
Availability: OutOfStock

~~$1,671.95~~ $869.85 Save 48% Sold out

Shipping calculated at checkout.

Product variants

Product Description

Package Includes:

(1) JBL VMA1240 Commercial/Restaurant 240W 70v Bluetooth Mixer/Amplifier, 5 Inputs
(2) Pair Rockville WET-7020W 5.25" 70V Commercial Indoor/Outdoor Wall Speakers in White
(5) (4) Rockville CCL5T White 70V 5" Commercial Ceiling Speakers 4 Restaurant/Office

Authorized JBL Dealer!

Features:

JBL VMA1240 Commercial/Restaurant 240 Watt Bluetooth Mixer/Amplifier with 5 Inputs
5-Input Mixer
Supports USB Drives and Bluetooth
240W, 1-Output Amplifier
Euroblock, RCA, and 1/4" Inputs
Euroblock Outputs
Per-Channel Bass and Treble Controls
Voice-Activated Ducking
Front-Panel Display and Controls
Configurable Output Routing
Includes Rack Mount Kit

Specifications:

Output Power Per Channel: 240 Watts into 4 Ohms or 8 Ohms
Insertion Loss: 70 V and 100 V Outputs: 1 dB Max.
Input Channels: 5
Output Channels: 1
Tone Control: Bass and Treble non-detented potentiometers on each channel
- Bass: ±14 dB @ 50 Hz
- Treble: ±14 dB @ 10 kHz
Input Sensitivity:
- Mic Input: 5.5 mVrms
- Line Input: 1.3 Vrms
- RCA Input (Stereo In): 130 mVrms
Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output
- 4/8 Ohms Output: 20 Hz to 20 kHz, ±2 dB
- 70 V/100 V Outputs: 80 Hz to 15 kHz ±3 dB
Total Harmonic Distortion (THD): Power Amp Output: <0.5%, 20 Hz to 20 kHz
Signal to Noise Ratio: >76 dB
Input Impedance:
- Mic: 400 Ohms
- Line: 20k Ohms
- RCA: 50k Ohms
Phantom Power: 27 VDC
Crosstalk: -70 dB
Nominal Input Voltages: Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz
Minimum Load Impedance:
- Low Impedance Output: 4 Ohms
- 70 V Output: 20 Ohms
- 100 V Output: 40 Ohms
Operating Temperature: 32°F to 95°F
Humidity: 95% RH
Storage Temperature: -4°F to 185°F
Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches
Product Weight: 25.5 Lbs.

Video of WET-7020:

How to Set Up WET-7020:

Video of WET-7020 HOME USE:

Video of WET-7020 COMMERCIAL USE:

Description:

The Rockville WET-7020W features 4-way swivel brackets that allow you to mount the speaker to your wall and angle it left/right and up/down. The 4-way swivel makes sound staging in large rooms easier and more efficient.

IPX55 rated!
These speakers are IPX55 rated. This means you can install them indoors or outdoors. They can withstand heavy rain, moisture, sun,dust, and even jet streams of water hitting the speaker from multiple angles. We went above and beyond in terms of product development to get these speakers IPX55 rated. The cabinets were upgraded to a high-end waterproof ABS material. The grill is made of aluminum and will never rust from outdoors use. We used powder coated steel brackets to ensure that the brackets wouldn’t rust either. The brackets pass a 96 hour salt water spray test. Even the speaker wire terminals are waterproof and rustproof!

Custom tuned sound
This model uses a sealed design protecting it from rain or moisture. We had these engineered and tuned to sound great for any music type. The bass frequency goes deep and sounds very balanced with the highs/mids.

What is 70 volt ?
70 volt systems are the number one choice for applications where you want to install many speakers. With 70 volt there are a lot of advantages over 8-ohm systems. One of the main advantages is the simplicity of the wiring as well as how easy it is to match up speakers with the amplifier. For example, you can buy one 70V amplifier with 350 watts and you can install speakers that total close to 300 watts. It does not matter if it is 15 speakers that are 20 watts each or 50 speakers that are tapped at 5 watts each.

You always want your 70 volt amp to have at least 15 or 20% more power than the combined watts your speakers are tapped at.

When we say the word tap, what we are referring to are the selectors these speakers have on them. For example, these speakers have selectable options of 2.5w, 5w, 10w, 20w. What this does is limit how many watts the built-in transformer on the speaker will allow the speaker to get from the amplifier. This gives you full customization over the sound for your space. In a restaurant for example you can tap your dining room speakers at 5 watts, the speakers by the bar area at 20 watts, and the ones in the hallway at 2.5 watts.

Another great feature with 70 volt is you can mix and match any 70 volt speakers whether they are ceiling speakers, wall mounted speakers, subwoofers, etc.
70 volt systems allow you to run very long lines of speaker wire without signal loss. This is ideal when running long speaker leads.

The wiring is simple. You just wire all the positive terminals of the speakers to the positive 70 volt terminals of the amplifier. The negative terminals on the speaker simply get wired to the negative terminals on the amp. You do not have to worry about impedance. The power is constant.

Features:

Pair Rockville WET-7020W 5.25" 70V IPX55 Commercial Indoor/Outdoor Wall Speakers
4-Way swivel bracket allows angle adjustments up, down, left, and right
IPX55 rating makes this perfect for outdoor use or indoor use
IPX55 means this can withstand jet streams spraying it from any angle without any damage
Rugged ABS cabinet is waterproof
Aluminum grill is waterproof and rustproof
Weather resistant
Powder coated steel mounting brackets that pass a 96 hour saltwater spray test
5.25” Woofer with Polypropylene cone
13mm PEI tweeter is very efficient and has great sound quality
Frequency Response: 60Hz – 20Khz
Sensitivity: 87dB
RMS Power: 40w (when using 8 ohm)
Nominal impedance: 8 Ohm
Waterproof spring loaded terminals
Built in transformer supports 70V installations
Built in tap switch to easily select your 70V power
Color: White
Weight: 4.16 Lbs each
Cabinet dimensions: 9.6” x 7.1” x 7.5”

There is a tap switch on the speaker so you can easily select how many watts you want the speaker to get from the amp.

70V Power Options:

20w
15w
10w
5w
2.5w

8 Ohm power handling:

How to Set up Your CCL5T:

Video of CCL5T WHITE:

Price Includes (4) Speakers!

There is a white, green, and red terminal on the speaker so you can easily select how many watts you want the speaker to get from the amp.

70V Power Options:

5w (White)
2.5w (Green)
1.25w (Red)

Description:

The Rockville CCL5T is a great choice for any restaurant, office, school, retail store, or any other commercial application. This speaker will sound great for all your PA announcements, and background music. There are 3 inputs so you can select how loud you want them to play.

What is 70 volt ?
70 volt systems are the number one choice for applications where you want to install many speakers. With 70 volt there are a lot of advantages over 8-ohm systems. One of the main advantages is the simplicity of the wiring as well as how easy it is to match up speakers with the amplifier. For example, you can buy one 70V amplifier with 150 watts and you can install speakers that total around 120 watts. It does not matter if it is 24 speakers that are 5 watts each or 48 speakers that are tapped at 2.5 watts each. You always want your 70 volt amp to have at least 15 to 20% more power than the combined watts your speakers are tapped at.

When we say the word tap, we are referring to the rear of these speakers where you can use the 1.25 watt, 2.5 watt, or 5 watt inputs. What this does is limit how many watts the built-in transformer on the speaker will allow the speaker to get from the amplifier. This gives you full customization over the sound for your space. In a restaurant for example you can tap your dining room speakers at 5 watts, and the hallway or bathroom speakers at 2.5 watts.

Another great feature with 70 volt is you can mix and match any 70 volt speakers whether they are ceiling speakers, wall mounted speakers, subwoofers, etc. 70 volt systems allow you to run very long lines of speaker wire without signal loss. This is ideal when running long speaker leads.

Features:

(4) Rockville CCL5T White 70V 5" Commercial Ceiling Speakers

Perfect for PA announcements or background music or any other applications where you want many speakers installed

Transformer with terminals for 5 Watts, 2.5 watts, or 1.25 watts

Double Paper Cone

0.5" voice coil

1.7 oz ferrite magnet

5” Woofer

Fireproof screw terminal block

High Quality Spring Loaded Push Terminals

Paintable Flush Mount Grills

Frequency Response: 100Hz – 17KHz