Pair Rockville KPS10 10" 1200w Karaoke Speakers+Bluetooth Pro Amplifier Mixer + Rockville R14GSBR100 Red/Blk 14 Gauge 100' Ft. Mini Spool Car Audio Speaker Wire

• (1) Pair of Rockville KPS10 10" 3-Way 1200 Watt Karaoke Speakers+Wall Brackets / MDF!
• (1) Technical Pro MM3000 Powered Bluetooth Microphone Mixer Amplifier Amp SD, USB
• (1) Rockville RCC14-100-2 CL2 Rated 14 AWG 100' CCA Speaker Wire In Wall Ceiling 70V

Video of KPS Series Speakers:

Features:

• Pair Rockville KPS10 10" 3-Way 1200 Watt Karaoke Speakers with Wall Brackets and MDF Enclosure
• Peak Power: 2400 Watts Per Pair (1200 Watts Each)
• Program power: 1200 Watts Per Pair (600 Watts Each)
• RMS Power: 600 Watts Per Pair (300 Watts Each)
• 3-Way Speaker With Built-In 3-Way Crossover For Amazing Sound!
• 10” Low Frequency Woofer With 1.37”, 100% Copper Voice Coil and 74 oz. Ferrite Magnet
• 3.85” High Frequency Tweeter With 7 oz. Magnet and 100% Copper Voice Coil
• 3.85” Mid-Range Speaker with 7 oz. Magnet and 100% Copper Voice Coil Gives Amazing Sounding Voice
• Tweeter Is Made Of A Special Blend of Iron That Is Tuned To Sound Great For Voice and Music
• 0.6” Inch Thick MDF Enclosure With Built-In Computer Tuned Port For Incredible Sound
• Speaker Weight: 26 Lbs. Each
• Woofer Has a Steel Basket OFC 100% Copper Voice Coils and a Paper Cone
• Foam Surrounds for Great Sound Quality
• Aluminum Voice Coil Bobbin
• Metal Speaker Grilles
• Impedance: 8 Ohm
• Sensitivity: 92 dB
• Frequency Response: 40 Hz – 18 kHz
• Banana Terminals
• Speakers Use Y30 High Grade Magnets
• PTC Protection Circuitry Prevents Against Blown Drivers
• Dimension: 20 inch x 10.8 inch x 11.9 inch 

Authorized Technical Pro Dealer!

Description of T Pro MM3000:

The MM3000 is a mic mixing amplifier ideal for audio professionals and sound engineers looking to consolidate equipment while maximizing sound and quality. As a mic mixing amplifier MM3000 is fitted out with a variety of features that make it the ideal amplifier to accompany a vocal heavy setup. For standard shorter mic connections, the MM3000 comes fitted out with six different 1/4” (unbalanced) mic inputs as well as two XLR (balanced) inputs to accommodate larger connections. For outputs, the MM3000 comes with 2 channels both equipped with standard banana binding output terminals.

To enhanced output, the MM3000 features an expanded set of controls that allow for user fine-tuning of output. Each of the mic inputs comes with an individual volume control as well as a switch to cut and activate input from the individual line. In addition, the volume of all mic inputs can be adjusted relative to music via the master mic volume dial or via the mic priority switch. The mic inputs are also divided into two channels that come with hi, mid, low, and echo controls. The echo can be further adjusted via the echo controls which allow you to control five different aspects of the feature.

As a power amplifier, the MM3000 sports a whopping peak output of up to 3000 Watts. This high peak output helps accommodate more powerful passive speakers while safeguarding sound quality during its journey from source to speakers. In addition, the MM3000 boasts 425 RMS watts per channel to ensure connected speakers consistently pump out vibrant, full-bodied sound.

To connect music and other line inputs, the MM3000 also functions as a multi-purpose audio receiver. It comes with an integrated tuner that allows you to stream music directly from the radio. To connect smartphones and other music storage devices, the MM3000 also comes with wireless Bluetooth compatibility as well as an Aux input. Music can also be streamed via the front facing USB port and SD card reader.

The MM3000 also comes equipped with features that help enhance sound quality. To fine tune audio to match any input and setting, the MM3000 comes with dual 10-band equalizers that allow you to boost and cut output for a cleaner sound. Music inputs also come with high, mid, and low, controls, as well as a balance knob. After creating the perfect sound you can even record it to SD Cards and Flash Drives via the recording capabilities.

Features:

• Technical Pro MM3000 Powered Bluetooth Microphone Mixer Amp
• 8 Microphone inputs
• Recording capabilities
• Built-in dual 10-band equalizer
• USB/SD inputs
• Digital display
• Playback controls
• Built-in cooling fan
• Dimensions (L x W x H): 19'' x 10'' x 1" inches
• Weight: 14.0 lbs
• Voltage: 110/220v
• Peak Power: 3000 Watts
• Inputs: RCA (2 audio sources), USB, SD card
• Outputs: Banana binding post (4 speakers), RCA (Line out)
• Card Support: USB/ SD card max size: 32 GB
• Playback: .mp3, /wav, .wma files from USB drives and SD cards
• Records: .mp3 files onto USB flash drive or SD card from tuner & RCA inputs
• Sampling Rate: 128 kbps / 44.1 kHz on .wav file recordings
• Bluetooth: v2.0 with EDR (2.4 GHz) technology
• Bluetooth Range: 30 feet
• Mic Inputs: (8) (2) XLR (balanced), (6) 1/4" (balanced)
• Equalizer: Dual 10 band
• Equalization Points: 32Hz, 64Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4KHz, 8kHz, 16kHz
• Adjustment Range: ±12dB
• Frequency Response: 20Hz-20kHz
• USB input: 5V power supply

How To Set Up Your RCC14 Speaker Wire:

Description:

CL2 rated speaker wire is perfect for commercial or home applications. CL2 means you can safely install it in your ceiling or behind walls. If you are doing a 70V or 100V or 8 ohm installation of wire then this is the perfect product for you.

This speaker wire is CCA (copper clad aluminum). Our CCA will run well because we use 30 % copper and 70 % aluminum. There are other CCA cables on the market that use 10 % or less of copper. OFC cables are better but they cost way more and in many applications there will be no performance difference. You should use OFC cables for long runs or if a lot of power will be running through it.

Each conductor is housed in a color-coded PVC for easy polarity identification. The entire cable is inside of a PVC material that is CL2 fire-safety rated.

Features:

• Rockville RCC14-100-2 CL2 Rated CCA (Copper Clad Aluminum) Speaker Wire For In Ceiling or In-Wall Installation
• 100 Feet
• 14 AWG (American Wire Gauge)
• 2 Conductor
• 30% Copper and 70 % Aluminum wire
• CL2 rated for safe installations in ceilings or walls
• Strands Count: 41 Wires Strand Size: 0.25mm
• Each conductor is housed in a color-coded PVC for easy polarity identification

Row content