Rockville RPA12 5000 Watt Peak / 1400w RMS 2 Channel Power Amplifier Pro/DJ Amp

$530.00 $284.95 Save 46%
Shipping calculated at checkout.
Product Description

How to Set Up Your RPA12:


All about your RPA12:


Power Ratings:

  • RMS Power Output:
  • Stereo 8 Ohm: 2 x 500W
  • Stereo 4 Ohm: 2 x 700W
  • Bridged 8 Ohm: 1 x 1400W
  • Peak Power Output:
  • Stereo 8 Ohm: 2 x 2000W Max
  • Stereo 4 Ohm: 2 x 2500W Max
  • Bridged 8 Ohm: 1 x 5000W Max

Terminals:

  • Input Terminals:
  • Combo jack (XLR and ¼") A & B inputs
  • Output Terminals:
  • Banana binding post speaker output
  • Speakon output
  • XLR output to connect another amplifier or powered sub

Features:

  • Rockville RPA12 5000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier
  • LCD displays volume in dB per channel and operating temperature
  • 2U rack space
  • Built in limiter protects your speakers from distortion and clipping
  • Bridged mode allows you to combine both channels power into one channel for use with a subwoofer
  • Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration
  • Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration
  • Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s)
  • Channel A & B Clipping Led Indicators
  • Channel A & B Separate Level Controls
  • Power, signal, clipping, and protection LED indicators on front of amp
  • Heavy duty rack mount ears with handles
  • Built-in variable high velocity quiet cooling fans
  • Maximum headroom for 4-ohm and 8-ohm Speakers
  • Level controls for precise setting and matching of sensitivity
  • Computer controlled IC protection circuitry against speaker short circuit, thermal over load, DC over load
  • User serviceable fuse (15A, 250V)
  • Frequency Response (bandwidth @ 2Vrms out, @ -3.0dB) 10 Hz - 30 Khz
  • THD + Noise @ 1Khz full power: < 0.03%
  • Input Impedance: 10K Ohm Balanced
  • Input signal voltage: 660mV - 1.5V
  • Input sensitivity: 0.7v
  • Damping factor: (100Hz, 10w, 4 ohms): 40.8
  • Damping factor: (1Khz @ 8 ohm): > 400:1
  • Effective damping factor (100Hz, 10w, 4 Ohms) 1.08
  • Output impedance at speaker terminals: 0.09803 Ohms
  • Frequency Response vs THD+N (worst case, across normal bandwidth 1W) 0.11%
  • Signal to Noise Ratio: > 100dB
  • IMD 60Hz & 1kHz, 4:1: < 0.04%
  • SLEW RATE (input filter limited) : 40v/uS
  • Power Requirements: 120V / 50-60Hz
  • Weight: 26.5 lbs
  • Dimensions: 19.09 x 16.93 x 3.35 inch

Shipping & Returns

Row content