MTX RZRPOD65 Polaris RZR 6.5" Dash Mount Speakers+Amplifier+Bluetooth Controller

• (1) MTX RZRPOD65 6.5" 130w Dash Mount Roll Cage Roll Bar Speakers 4 Polaris RZR/UTV
• (1) MB QUART NA2-400.2 400w 2-Channel Amplifier For Polaris/ATV/UTV/RZR/CART
• (1) MB QUART N2-WBT Wired Bluetooth Preamp Controller

Authorized MTX Dealer!

Description of RZRPOD65:

Performance RZR Audio
The RZRPOD65 are the best solution for adding speakers to your Polaris RZR. These all weather custom fit speaker pods mount to the vehicle's roll cage and are contoured to fit perfectly in the OEM dash. No more mounting speakers on the outside of your cage where they can get damaged and no more having to settle for kick panel speakers since your feet have no ears anyway. The RZRPOD65 delivers high performance audio in a location where you can actually hear it.

OEM Finish
The MTX RZRPOD65 is a pair of speaker pods that are designed to mount directly to the dash/cage of specific Polaris RZR models. The pods are constructed using rotationally molded polypropylene which creates a finish that is weather resistant and durable. The pods mount in existing dash locations and do not require any cutting or drilling to install. Each pod includes a weather resistant 6.5" coaxial speaker featuring a polypropylene cone and clear Teteron tweeter that deliver exceptional full range clarity. The mounting location is ideal for sound staging as the speakers mount directly in front of the driver and passenger ensuring music can be heard clearly even at high speeds.

Features:

• MTX RZRPOD65 6.5" 130w Dash Mount Roll Cage Roll Bar Speakers 4 Polaris RZR/UTV 
• All-Weather Construction with UV Inhibitor
  
• Custom Fit for RZR Dashboard
  
• No Cutting or Drilling Required
  
• Does Not Interfere with Aftermarket Cage
  
• IP66 Rated
  
• RMS Power (Watts): 65
  
• Peak Power (Watts): 130
  
• Sensitivity: 90.7dB (1W/1m)
  
• Frequency Response: 85Hz - 22kHz
  
• Impedance: 4Ω
  

Fit Guide:

MODEL                                2014    2015    2016    2017

RZR XP/XP4 1000                 Yes     Yes     Yes     Yes
RZR XP/XP4 TURBO                                   Yes     Yes
RZR 900/900S/1000S                        Yes     Yes     Yes
RZR 4 900 EPS                                  Yes     Yes     Yes

• MB QUART NA2 400.2 400w 2-Channel Amplifier Amp For Polaris/ATV/UTV/RZR/CART
• Marine Grade Protection: Yes - Amplifiers are ABYC & ASTM certified which defines that marine amplifiers must use conformal coated PC boards to resist corrosion from salt spray & moisture.
  
• Pre-Amp Circuitry: Q-Stasis Pre Amplifier Stage - The highly engineered Q-Stasis pre-amplifier stage reduces incoming noise from source units dramatically improving sound quality
  
• Inputs: 1 Pair, RCA Nickel-Plated - High temperature impact resistant with hex screw terminals that allow for secure connections and is erosion resistant
  
• Operation Mode: Two channel operation - Flexible installation allows this amplifier to run in two channel or bridged mono mode.
  
• Crossover / Signal Shaping: Switched FULL / LPF / HPF - Complete control of amplifier signal, essential when using two or more amplifiers
  
• Class / Topology: Full Range Class D - Highly efficient circuit topology which helps the amplifer develop a lot of power in a very small heatsink.
  
• Output Devices Technology: PWM MOSFET Power Supply - Stable power through the PC board with minimal heat generation
  
• Heat Sink: Aluminum - Quickly dissapates heat to allow the amplifer to run lower impedance for longer duration
  
• Power Supply: Simpatico Coil Design - The dual coil Pulse Width Modulated power supply keeps voltage constant through the Ultra-Fi output devices
  
• Output Connections: Quick Dissconect Wires, RCA Connections - Quickly remove amplifer when you are putting machine up for the winter of as a security precaution
  
• Connections Type: Gold-plated connections - Gold-plated power, ground, speaker and RCA corrosion resistant connections
  
• Diagnostics: Three-stage protection circuits - Monitor thermal, overload, DC, and speaker short protection with lighted indicators on the amplifier end panel
  
• Marinized / Waterproof: Yes - Water resistant for durability in any environment

Specifications:

• Class: Full Range Class D
  
• Variable Voltage: 0.2V~9V
  
• Signal to Noise Ratio: >90dB
  
• Frequency Response: 20Hz-20kHz
  
• Crossover Type: Electronic 12dB Per Octave
  
• Low Pass Crossover: Switch Low Pass 300 Hz
  
• Bass Boost: 0-12dB@45Hz
  
• Subsonic Filter: 60Hz
  
• Power @ 2-Ohms: 2 x 200W
  
• Power @ 4-Ohms: 2 x 100W
  
• Total Channels: 2
  
• Audio Inputs: RCA
  
• Power Terminal 12v/GND: Molex 10 ga
  
• Speaker Terminal Wire Gauge: Molex Plug Connector
  
• Fusing: 1 x 30 Amps
  
• Certifications: Marine & Powersports
  
• Dimensions: 3.70 X 5.51 X 1.77 in (9.4 X 14.0 X 4.5 cm)
  
• Weight: 2.12 lbs (0.96 kg)

The MB Quart Nautic bluetooth controller is simple source unit solution designed to mount in a standard switch or accesory location. Features include: Back lighting and RCA outputs (Left & Right).

Features:

•  MB QUART N2-WBT Wired Bluetooth Preamp Controller, Boat Polaris/ATV/UTV/RZR/CART
• Marine Grade Protection: Yes - Meets or excceds the American Boat and Yacht Council (ABYC) marine electronics standards and the American Society for Testing and Materials (ASTM)
  
• Source Type: Bluetooth - Allows to music via Bluetooth enabled devices
  
• Input Types: Bluetooth and 3.5mm jack - Bluetooth enabled devices and 3.5mm input from headphone output of mobile music device or phone
  
• Control Buttons: Fingertip Joystick - Play/Pause, Tracks Forward/Back, Volume Up/Down and Power On/Off are all protected from the elements with the the unique Fingertip Joystick
  
• Bluetooth Connect: Yes - Bluetooth Connect allows your phone or other Bluetooth enabled device to be quickly paired to the controller without a complicated pairing process.
  
• Additional Inputs: 1 pair RCA (Left & Right)
• Bluetooth Range: 32' - 10 Meter
  
• Frequency Response (Aux In): 20Hz - 20kHZ
  
• Pre-amp Outputs: 1pr Left/Right
  
• Pre-amp Voltage: 2V
  
• Display Type: Backlight
  
• Display Backlit: Dial is backlit
  
• Dimensions Mounting Hole: Swich Hole 0.83" x 1.41" (2.1cm x 3.58cm)
  
• Dimensions Mounting Depth: 2.5" (6.35cm)
  
• Dimensions Mounting Bezel: 4.15" (10.5 cm)
  
• Product Weight: 1.0 lbs (0.45 kg)
  
• Product Dimensions: 3.5" (8.89cm)