(2) KICKER 45KM124 12" 175w RMS Marine Boat Subwoofers+MTX Mono Amplifier+Wires

Package Includes:

• (2) KICKER 45KM124 12" 350w Peak/175w RMS Marine Boat Subwoofer SVC 4-ohm Sub KM12
• (1) MTX WET500.1 1000 Watt Marine Mono Amplifier Class D Amp 4 Boat/ATV/UTV/RZR/Cart
• (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
  

---

Authorized Kicker Dealer!

What's In The Box:

• (1) 12" Woofer
• (1) Back Gasket
• (8) Mounting Screws
• (8) Mounting Screw Clips
• (1) Owner’s Manual

Description:

The KICKER® KM 12-inch Marine Subwoofer makes serious bass in a sealed or ported enclosure. Made to take the power and the weather, this sub is custom made to bump in your boat. Packed with features and made for marine, KICKER gives you the deep, loud bass your boat needs with the KM Series of subs.

Features:

• KICKER 45KM124 12" 350w Peak/175w RMS Marine Subwoofer SVC 4-Ohm
• RMS Power Handling: 175 Watts
• Peak Power Handling: 350 Watts
• Four-Ohm Voice Coil
• Injection-Molded Polypropylene Cone
• Co-molded Santoprene® Surround
• UniPlate™ Back Plate And Pole Piece
• Thick Tinsel Leads
• Large Ceramic Magnet
• Rear Gasket Included
• Polymer Basket Resists Corrosion
• Protective Terminal Cap
• Stainless Mounting Hardware Included
• Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
• Frequency Response: 30 Hz - 500 Hz
• Impedance: 2 Ohms
• Mounting Depth: 5.5" inches
• Hole Diameter: 11" inches
• Sealed Enclosure Volume Min-Max: 1.25 - 3.5 cubic feet
• Vented Enclosure Volume Min-Max: 1.75 - 2.25" cubic feet
• Outer Diameter: 13" inches
   

Click here for the Owner's Manual

---

Authorized MTX Audio Dealer!

Description:

All Weather Bass
WET Series amplifiers from MTX Audio are designed to deliver all the power your system needs whether they are being used on a boat or off-road vehicle. The WET500.1 is a mono block subwoofer amplifier with an incredibly small chassis. This amp is capable of producing up to 500W RMS and features 2-Ohm stability, making it the perfect choice to run two of the WET series subwoofers.

Marine Hardened
The unit features a highly efficient class D design and small chassis with an extruded heat sink that effectively dissipates heat ensuring long play times. It also incorporates a surface mount design, which attaches critical parts more securely to the circuit board creating greater resistance to vibration which is very important in boat and off-road applications. This amplifier features a conformal coated circuit board making it resistant to moisture that may get into the the chassis. Other features include stainless steel hardware, rubber gaskets around interconnects, and plastic covers that cover the controls preventing moisture from getting into the amplifier.

Features:

• MTX WET500.1 1000 Watt Mono Class D Marine Amplifier for Boat/Marine
• Total Peak Power: 1000 Watts x 1 Channel
• RMS Power Output @ 2 Ohms: 500 Watts x 1 Channel
• RMS Power Output @ 4 Ohms: 300 Watts x 1 Channel
• Signal to Noise Ratio: 80dB
• Topology: Class D
• THD: <1.0%
• Crossover: Variable Low @ 40 Hz to 220 Hz (12dB/Oct)
• Bass Boost: 0dB, 6dB, 12dB Switchable
• Max Sensitivity: 200mV
• Maximum Input Signal: 5V
• Weather Resistant: IP55 Rating
• Surface Mount PCB Design: Decreases chassis size, improves layout efficiency and increases vibration resistance without sacrificing performance or sound.
• Conformal Coated Circuit Board: Protects against corrosion or circuit deterioration due to exposure to moisture or salt conditions
• Variable Butterworth Crossover: A 12dB/Oct crossover that allows you to set the frequency your speakers will play down or up to
• Stainless Steel Hardware
• Rubber Gaskets Around RCA Connectors
• Plastic Cover Over Control Adjustments
• Triple Protection Circuitry: A Thermal, DC Offset, and Short Circuit Protection circuitry ensures the amplifier will protect itself in the event of a problem
• Product Dimensions (H x W x D): 2.25" x 8.94" x 6.38" inches

Click here for the Owner's Manual

---

 

Video of RMWK:

Features:

• Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
• 20 ’ Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
• 18’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
• 18’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
• 25’ 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
• 25’ Blue Remote Wire
• (1) Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
• (1) 120A Mini-ANL Fuse
• (1) 80A Mini-ANL Fuse
• (2) Ring Terminals
• (2) Spade Terminals
• (5) Speaker Cable Terminals
• (1) Washer
• (10) White Cable Ties

Owner's manual

Row content