2) KICKER KMTC9 9" 600w Black Wakeboard Tower Speakers+Bluetooth Receiver+Amp

Package Includes:

• (1) Pair of Kicker KMTC9 HLCD 9" 600w Horn-Loaded LED Wakeboard Tower Speakers 44KMTC94
• (1) Rockville RXM-T2 2400w Peak/1200w Dyno-Certified RMS 2 Channel Class D Marine Amplifier
• (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
• (1) Rockville RGHR2 Marine Gauge Hole Receiver w Bluetooth USB, Radio + Wired Remote

---

Description of 44KMTC94:

KICKER KMTC9 HLCD Tower Systems are made for incredibly smooth sound up close or at a distance - without harsh horn “glare.” Play them as loud as you want, for as long as you want. These powerful horn-loaded speakers are the new standard for durable, powerful sound quality on your boat. Sold as pairs.

KMTC Tower Systems deliver great looks, total adjustability and incredible sound quality. Your tunes are loud and clear, whether you’re in the boat, at Party Cove or the end of a tow rope. Want to aim your sound? Easily rotate the speakers a full 359° without tools, then watch the LED’s light up the night in any one of seven colors. Don’t just be the life of the party. Be the reason for it.

Features:

• Pair KICKER KMTC9 HLCD 9" 600w Horn-Loaded LED Wakeboard Tower Speakers 44KMTC94
• Four-Ohm Voice Coil
• High-Frequency Horn Design with Titanium-Dome Compression Drivers
• Stitched Polypropylene Cone With Santoprene® Surround
• UV-Resistant Polymer Basket
• 359° Swivel With Toolless Locking Cam/Toggle System
• Stainless Steel/ABS Clamp Fits 1.5 - 3.25-Inch Tubing
• Through-Clamp Wiring System With Mating Socket
• Single Bolt Speaker Removal System
• 316L Stainless Mounting Hardware Included
• Seven Color LED Grilles Included*
• Meets or Exceeds ASTM Standards for UV** and Salt/Fog Exposure***

Specifications:

• Woofer: 9 inch, 23 cm
• Impedance: 4 Ohms
• Horn Loaded Compression Driver: 1 in, 2.5 cm
• High Pass: 12 dB, at Frequency: 2.5k Hz
• Low Pass: 12 dB, at Frequency: 2.5k Hz
• Peak Power Handling: 600 Watts
• Continuous Power Handling: 300 Watts RMS
• Frequency Response: 20-20k Hz
• Height incl. bracket: 13-9/16 inch, 34.4 cm
• Height from roll bar: 11-9/16 inch, 29.4 cm
• Diameter: 9-13/16 inch, 24.9 cm
• Depth: 10-7/8 inch, 27.7 cm
• LED Lighting

---

Videos of RXM-T2:

Description:

The RXM-T2 is part of the Rockville proton series. This is one of the most durable marine amps in the world. It is completely water resistant! It is protected from rain, moisture, splashing, heat, cold, saltwater, vibrations, the sun, and anything else you will throw at it! The small footprint makes this durable so you can mount the amplifier even in the tightest locations. The other thing that makes this amp so durable is that it is a class "D" power supply. So even if you run it at a really low impedance the amplifier can handle it!

Warning: This amplifier produces insane power! We do not want you to blow your speakers. Do not under-estimate this amplifiers' capability! If you are using this amplifier for 2 or 4 full range speakers, then please install with the gain level down all the way and then crank it up very slowly to protect your speakers from blowing. The reason we created this amplifier with so much power capability is for 2 reasons. One reason is to make it capable for powering lots of speakers per channel. Secondly was to give you enough headroom on the amplifier so you do not have to crank the gain all the way up all the time. This headroom ultimately will increase the sound quality like crazy!

The RXM-T2 is rated at 1200w RMS; Dyno Certified RMS Power Ratings! This amp performs at 600 x 2 @ 2 ohms and when you bridge it you get 1200 x 1 @ 4 ohms! This is a full range class "D" amplifier. It is super-efficient. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.

We will offer a 90 day money back guarantee. If you are not happy with the output power or sound quality, we will call tag the amp back and give you all your money back!

One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. RXM-T2 has (3) 35 Amp fuses. This amplifier will also go louder than most amps with this same fuse rating due to how efficiently it runs.

I wanted to take a second and talk about the waterproofing process we use on this amplifier. We use a chemical compound which includes Acrylate Acid, Silicone, Polyurethane, and a few other substances. When these chemicals solidify, it becomes a protective on the PCB. This is what we call a conformal coating. This makes the amplifier water resistant. It also prevents oxidization and protects the amplifier from moisture. There are 3 ways manufacturers can conformally coat a PCB board. Soak, paint, or spray. Once we finish building the PCB board we paint it with our conformal coating.

There is really no amplifier on the market that sounds this good and has this much output power at this price point.

Features:

• Rockville RXM-T2 2400w Peak/1200w Dyno-Certified RMS 2 Channel Class D Marine Amplifier
• Full-Range Class D Amplifier Architecture
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
• 800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N
• 1200 Watts (2 x 600 Watts) at 2 ohms < 1% THD
• 1200 Watts (1 x 1200 Watts) bridged @ 4 Ohms < 1% THD
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc): 2400 Watts: (2 x 1200 Watts) @ 2 Ohms and (1 x 2400 Watts) @ 4 Ohms bridged
• Fully marine grade amplifier with conformal-coated PCB board
• Protected from moisture, saltwater, UV, bumps, vibrations, heat, cold, and more
• Double Sided Surface Mount (SMD) PCB Design
• High-Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors
• 2-Ohm Stable Stereo
• 4-Ohm Mono Bridgeable
• Mute and Delay Soft Start System
• Full IC-Controlled Protection Circuitry
• RCA Preamp Line Output
• Status Mode LED Indicator
• 8 Volt Preamp Circuitry
• 4 Gauge Lucite Encapsulated Power/Ground Terminals
• 12 Gauge Lucite Encapsulated Speaker Terminals
• Fully Adjustable 12dB / Octave Crossover
• Low Pass 50Hz - 250Hz
• High Pass 50Hz - 250Hz
• Fully Adjustable 12dB Bass Equalizer with Differential Circuitry
• Minimum THD at Rated Power: < 0.05%
• Frequency Response: 15Hz - 20KHz
• S / N Ratio: 100dB
• S/N Ratio: >97dB
• Damping Factor: > 200 @ 100Hz
• 3 x 35 Amp Fuses
• Dimensions: (W x H x L) 6.7" x 1.98" x 12.25"

---

All about your RGHR2:

How To Set Up Your RGHR2:

Included in the box:

• Marine digital media receiver
• Wired remote with 32.8 foot wire
• USB extension cable (40 inches)
• Mounting bracket
• Screws
• ISO wiring
• Owner manual and warranty

Description:

The Rockville RGHR2 is the best gauge hole receiver on the market. We developed this to give you the best sound and the best features.

Crazy loud!
We put in a built in amplifier that is louder than other marine receivers on the market. The RMS power of the built in amp is 28 watt x 4 channels! It is crazy loud and can be heard over the sound of the wind when you are on the water! There is also a built in EQ to customize the sound to your taste.

Included wired remote
Rockville is the only brand on the market that I know of that supplies a wired remote with your radio. The wired remote is a must have for any marine radio. This is great for boats and other powersport applications. We also include an extra long 32.8 foot wire so you will not need any additional extension cables.

Latest listening features
The RGHR2 gives you many listening options. The Bluetooth technology allows you to stream audio from your Bluetooth enabled phone or other music player to the receiver. Our Bluetooth distance is 50 feet! There is also a USB input allowing you to listen to music stored on a thumb drive. You can plug in any audio device to the auxiliary input. There is a built in radio with crystal clear reception as well.

Ability to connect multiple external amps
This receiver makes your system expandable. Two sets of pre-amp outputs allow you to hook up external amps for your speakers and/or subs. This has front and switchable rear/sub pre-amp outputs so you can amplifiy your speakers and a subwoofer amplifier.

Features:

• Rockville RGHR2 Weather Resistant Gauge-Hole Digital Media Receiver w/Bluetooth/USB/AM/FM
• Fits into a standard Gauge-Hole (Tachometer) Opening
• Built-in 72 x 4 Watt Peak high powered amplifier (28 x 4 RMS)
• Built in EQ with preset EQ curves (Pop, Class, Rock, Flat)
• IP66 Waterproof Certification (Tested to withstand the elements)
• USB Input to play back audio files store on a USB thumb drive or any other USB device
• RCA Aux Input
• AM/FM Radio Built In with 18 FM and 12 AM presets + US and European tuning
• Bluetooth built in to stream audio from any Bluetooth enabled device
• USB Input Charges Your Phone
• Two Sets of RCA Outputs (Front and a switchable rear/sub) allow you to connect external amplifiers
• Big easy to use buttons
• Backlit LCD display
• Wired Remote Control Included (normally $50)
• Required cutout: 2.96" (diameter) x 2.75" (depth)
• USB is 500mA and 5V and supports 16GB max
• Dimensions:
• 2.96" cutout mounting diameter
• 4.45" diameter top plate
• 3.9" mounting depth (not including top plate)
• 5.0" depth including the top plate
• Specs of the built in amplifier:
• TDA7851L quadbridge power amplifier
• 4 x 72 watts peak @ 2 ohm
• 4 x 48 watts peak @ 4 ohms
• 4 x 28 watts RMS @ 4 ohms
• Highly efficient even when running at 2 ohms!
• Low distortion even at top volumes

---

 

Video of RMWK:

Features:

• Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
• 20 ’ Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
• 18’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
• 18’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
• 25’ 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
• 25’ Blue Remote Wire
• (1) Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
• (1) 120A Mini-ANL Fuse
• (1) 80A Mini-ANL Fuse
• (2) Ring Terminals
• (2) Spade Terminals
• (5) Speaker Cable Terminals
• (1) Washer
• (10) White Cable Ties

Row content