Kicker 41KMT674 6.75" Marine Wakeboard Speakers+Tweeters+4 Ch Amplifier+Amp Kit

$984.92 $723.95 Save 26% Sold out
Shipping calculated at checkout.
Product Description
Package Includes:
  • (1) Kicker 41KMT674 6-3/4" 6.75" 300W RMS Marine Wakeboard Tower Speakers KMT67 New
  • (1) Rockville RMWK4 4 AWG Gauge Waterproof Marine Amplifier/Amp Install Wire Kit
  • (1) Rockville KRYPTON MF4 2400w Peak / 600w RMS 4 Channel Marine Amplifier Boat Amp

Audiosavings can only ship Kicke

Audiosavings can only ship Kicker products to the United States.  Sorry, but we can not ship Kicker to Canada or United Kingdom.

Here at AudioSavings we strongly believe that Kicker is the BEST brand in the Car Audio Industry. We are so confident that you will be happy with your Kicker purchase from us that we will offer you the following guarantee. We GUARANTEE you will be more than satisfied with the sound and value of any Kicker products purchased from us. We urge you to buy this product; test it; and if it doesn’t meet your standards; send it back to us within 90 Days and we’ll give you a 100% FULL REFUND (or store credit). We’ll even give you a return shipping label to ship it back to us!!!

There are no restrictions to this guarantee, other than you must send back the same item we sent you along with the any included accessories.


The KMT67 consists of dual 6-1/2-inch woofers which flank a unique exponential horn-loaded tweeter, integrated into two stylish, injection-molded ABS enclosures that intensify and carry the music across the water from any aquatic cruiser’s tower. Horn-loaded tweeters deliver long-range output and superior dispersion control. The six total speakers provide twice the cone area of a traditional coaxial tower system for ultimate volume.

The enclosures are designed for either below- or above-the-bar mounting. Billet-aluminum mounting brackets and clamp inserts adjust to seven common sizes, matching most every wake tower or roll-bar diameter. Each enclosure is also designed with a five-way, binding post hook-up on the back for added stability. The system includes stainless-steel mounting hardware.

The KMT67 is a full-range, high-quality two-way speaker system specifically designed for the boat captain, his crew and fun-seekers at the end of a tow rope. The tower system adds yet another level to the diverse selection of audio gear for watercraft produced by the legend in mobile audio.

The KMT67 is weather-proof with sealed cones and motor assemblies, while the titanium-dome tweeters are protected by dense, open-celled foam. All components are UV-treated for improved resistance against the sun’s rays and the harsh marine environment.The speakers come with grilles that can be removed for a different aesthetic appeal.

Features:

  • Kicker 41KMT674 6.75" Marine Wakeboard Tower Speakers
  • Power Rating :
  • Peak Power : 600 Watts (300 Watts per Speaker)
  • RMS Power : 300 Watts (150 Watts per Speaker)
  • Weather-proof
  • Horn loaded compression-driver with titanium diaphragms component system
  • Full-range
  • Injection-molded enclosures for below- or above-the-bar-mounting
  • Dual midrange drivers
  • Horn-loaded tweeters for long-range output and superior dispersion  control
  • Adjustable billet-aluminum mounting brackets with clamp inserts for  popular tube sizes (1-5/8”, 1-3/4”, 1-7/8”, 2, 2-1/4”, 2-3/8”, 2-1/2”)
  • KB6000 indoor/outdoor full-range enclosures for patio, RV’s, etc.


About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.
New Page 4

 

Video of RMWK:

Features:

  • Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit
  • 20 ’ Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable
  • 18’ 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3’ Black Poly Woven Mesh to better resist chemicals in the battery compartment
  • 18’ 4 Gauge High Current, Low Impedance, Light Blue, Flexible Ground Cable
  • 25’ 16 Gauge 100% Tinned-CCA, White, Non-Transparent Resin PVC, Flat Speaker Cable
  • 25’ Blue Remote Wire
  • (1) Silver Mini-ANL Fuse Holder – Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
  • (1) 120A Mini-ANL Fuse
  • (1) 80A Mini-ANL Fuse
  • (2) Ring Terminals
  • (2) Spade Terminals
  • (5) Speaker Cable Terminals
  • (1) Washer
  • (10) White Cable Ties


 

How To Install a Marine Amplifier onto Your Boat:

KRYPTON MF SERIES PRODUCT VIDEO:

What's in the Box:

  • Amplifier
  • PA microphone
  • Birth sheet with tested power
  • Owner’s manual
  • Mounting Screws
  • Warranty

Description of KRYPTON MF4:

We took the sound of our Krypton car amps and we added top of the line marine grade parts so that they will last forever and withstand even the harshest conditions on the water.

We went a little overboard (no pun intended) to make this amp marine ready. We conformal coated the PCB board with a waterproof glue that is painted on to protect the circuitry. The heat sink, including the bottom plate, is made of aluminum which is rustproof. The end panels, internal mounting screws and hardware of the amp are made of stainless steel and are rustproof. Even after many years of use the amp will be rust free and operate like new!

The KRYPTON MF4 is a class AB 4-Channel high power amplifier with 2,400 watts peak output and 600 watts Dyno certified RMS power. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.

This amp has a very cool fully adjustable 12dB/Octave crossover. What is cool about it is that our crossover supports low pass, high pass, bandpass, and subsonic. This makes our amp ideal for subwoofers (sealed and vented), full range speakers, and midrange speakers. In high pass mode we allow you to filter out frequencies between 15Hz - 4K Hz. In full mode you will not be filtering any frequencies. The really cool part is in low pass mode you can use the high pass and low pass mode. So for example you can set the low pass mode to 50 hz, and then you can set the high pass to 15 Hz. In this case you would be playing frequencies in the range of 15-50 Hz on this channel. This would be an example of using the subsonic filter. Another option you have is for midrange speakers, you can use our low pass filter and set it really high. Lets say to 3Khz and then you can set the high pass to 150Hz and your midrange speakers will only play that frequency range. Our advanced crossover technology will allow you to really fine tune each speaker to get the sound you desire.

The KRYPTON MF4 is protected by a fully IC controlled circuit which includes mute, delay and soft start technology so that the amplifier will turn on safely every time and protect your speakers from popping.

You will also notice we decided to add a cool battery voltage display meter which looks great but also serves as a tool for you to know if your battery voltage is dropping which would affect your systems performance. We designed the amps to be able to last for many years even if you are playing them at max volume before clipping for extended periods of time.

This is a class A/B amplifier which is what we recommend to get the best sound quality out of full range speakers.

One other cool features about this amp is the marine public address system. Simply plug the microphone into the 3.5mm jack and you are ready to go. The amplifier features talk-over functionality. When the microphone is being used the music will fade to the background until you stop talking into the mic

Features:

  • Rockville KRYPTON MF4 2400 Watt Peak and 600w Dyno Certified RMS Class AB 4-Channel Marine Amplifier
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
  • 2 Ohm: 150 Watts x 4 Channels <1% THD+N @ 14.4 Volts 
  • 4 Ohm: 100 Watts x 4 Channels <1% THD+N @ 14.4 Volts 
  • 4 Ohm Bridged: 300 Watts x 2 Channels <1% THD @ 14.4 Volts 
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)
  • 2 Ohm: 600 Watts x 4 Channels 
  • 4 Ohm: 400 Watts x 4 Channels
  • 4 Ohm Bridged: 1200 Watts x 2 Channels 
  • Painted Conformal Coating PCB Board (Uses 2577 Waterproof Glue) 
  • Rustproof Aluminum heat sink with black hairline finish
  • Stainless steel end panels are rustproof
  • All screws and mounting hardware are stainless steel and rustproof
  • Bottom panel is aluminum and rustproof
  • Marine public address system with microphone with talkover function
  • All channels on the amp have crossovers so they can each be used for subs or full range speakers or tweeters or midrange speakers
  • All channels on the amplifier are bridgeable
  • Digital Voltage Display on Amp
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
  • Adjustable Subsonic Filter: 15Hz -40Hz (This filter is on the HPF knob)
  • Adjustable Low Pass Filter: 40Hz – 4KHz
  • Adjustable Band Pass Filter: 15 Hz - 4 kHz (use both the HPF and LPF filter)
  • Adjustable High Pass (Subsonic) Filter: 15 Hz - 4 kHz
  • 2CH/4CH Input Mode Switch
  • 8 Volt Preamp Circuitry
  • Under Voltage Protection at 10V
  • Over Voltage Protection at 16V 
  • High-Speed MOSFET Power Supply
  • Full IC-Controlled Protection Circuitry
  • Fully Adjustable 12dB Bass Equalizer
  • Adjustable Input Level Control
  • Studio-Grade Bipolar Output Stage Transistors 
  • Mute and Delay Soft Start System                       
  • Status Mode LED Indicators
  • Minimum THD at Rated Power: < 0.05%
  • S / N Ratio: >90dB
  • Frequency Response: 10Hz - 50KHz
  • Damping Factor: >85 @ 100Hz
  • 40 Amp x 2 ATC Fuses
  • Color: Black
  • Dimensions: (Lx W x H) 16.3? x 8.66? x 2.2?
Shipping & Returns

Row content