KICKER KMC2 Gauge Hole Digital Media Bluetooth Receiver+(2) 5.25" Black Speakers
Product Description
- (1) KICKER KMC2 Gauge Hole Digital Media Receiver w/Bluetooth/USB For Boat/ATV/UTV
- (1) Pair Rockville MS525B 5.25" 400 Watt Waterproof Marine Boat Speakers 2-Way Black
Description of 46KMC2:
Meet the control center for fun on your boat!
The Party Starts Here
Equipped with an easily readable screen, rotary encoder and over 200 watts of total peak power into four channels, the KMC2 comes equipped with plenty of power. Add even more bump to your boat by adding amplifiers to the included RCA outputs.
Connect your Bluetooth to the KMC2, plug into the included USB or RCA inputs, or turn on the AM/FM radio. Add a wired KRC12 remote for even more control. This durable media center is ready for some fun on the water!
- Fits in gauge opening
- IPX66 certification
- Uses USB, RCA, AM/FM and Bluetooth audio sources
- USB audio playback or charging
- RCA outputs
- Compatible with KRC12 Remote Commander
Specifications:
- Power Output @ 14.4V, 4O stereo, <10% THD+N: 25x4
- Frequency Response [Hz]: 20-20k
- Signal-to-Noise Ratio [dB]: 87
- RCA Outputs: 1 Set of Pre-amp Outputs
- Line-Out Level [V]: 2.5
- Outer Trim Ring Dimensions [in, cm]: 4.4, 11.2
- Protrusion From Mounting Surface [in, cm]: 1.25, 3.1
- Mounting Depth [in, cm]: 3.9, 10
- Mounting Hole Diameter [in, cm]: 3, 7.62
- Mounting Panel Thickness Range [in, cm]: Any
- IP Rating: IP66
- AUX Input SensitivityAUX Input Sensitivity: 500 mV
- USB:Playback, Charging, Compatible File System: MP2, MP3, WMA, WAV16, FLAC16, DC 5V, 1 Amp, FAT32
- BT Range (feet): 30
Video of MS525:
What's In the Box:
- 2 Speakers
- Installation Hardware: (8 Stainless Steel Screws + 8 Stainless Steel Speed Clips)
- Mounting Template
- Owner's Manual
- Warranty Card
Features:
- Pair Rockville MS525B 5.25" 400 Watt Waterproof Marine Boat Speakers 2-Way White
- Peak Power: 400 Watts per pair / 200 Watts each
- RMS Power: 200 Watts per pair / 100 Watts each
- Injection Molded Polypropylene Cone
- Aluminum voice coil with ASV winding
- Cloth surrounds
- Impedance: 4 Ohm
- Frequency Response: 110Hz – 20 Khz
- Sensitivity:87dB @1w/1m
- High quality magnet: 6 Oz Y30 Ferrite magnet
- 1” inch ASV voice coil
- IP56 waterproof
- Fully Marinized Against Salt & Fresh Water Conditions
- Completely Waterproof and rustproof at level IP56
- Anti-UV molded ABS plastic basket & grill
- Pre-installed mounting screws included
- Perfect for marine, outdoor, and car use
- 1” inch Tweeter: (PEI Diaphragm with NdFeB magnet)
- Injection Molded Polypropylene Dust Cap
- SPL: 87dB ± 2dB (at 1M / 1W)
- Resonant Frequency (F0) 120Hz + or – 20% at 1V
- 3MM plate and 3 MM T-yoke
- Total Diameter: 5.79”
- Cutout Diameter in Inches for Mounting: 5.31"
- Total Height: 2.56"
- Mounting Depth in inches:1.85"
- Shipping weight: 2.42 Lbs
- Shipping Dimensions: 6"x 6" x 5.7"
T/S Parameters:
- Magnet weight in OZ: 6 OZ
- Magnet details: F70*F32*10
- Fs: 142 Hz
- Re: 3.2 ohms
- Qes: 2.08
- Qts: 1.3
- Qms: 3.467
- Vas: 1.712L
- Cms: 195.49UM/N
- Bl: 2.967
- MMS: 6.4g
- XMAX: 1.5 mm
- SD: 78.54 cm2
??
Shipping & Returns
Row content