Infinity KAPPA 1050M 10" 900 Watt Subwoofer+Micro Powersports Amplifier+Amp Kit

$788.94 $244.90 Save 69%
Shipping calculated at checkout.
Product Description

Package Includes:

  • (1) Infinity KAPPA 1050M 10" 900 Watt Marine Subwoofer w/ RGB Lighting 2 or 4 Ohm
  • (1) Rockville ATV300 Mono UTV/Motorcycle/ATV Amplifier IP65 Micro Powersport Amp
  • (1) Rockville RWK8ATV OFC Copper 8 AWG Gauge Amp Installation Wire Kit 4 RZR/ATV/UTV

Description:

Infinity's Kappa Marine loudspeakers leverage Infinity's world class audio engineering and music reproduction with purpose-built marine loudspeakers that will survive the rigors of the harsh marine environment. The lineup features the three most popular sizes for boats and watercraft. The 6-1/2" coaxial, 8" three-way convertible speaker system and 10" woofer have Plus One™ polypropylene woofer and midrange cones, Mylar tweeter domes (Except Subwoofer), one piece cast polymer baskets, sealed magnets, and rubber woofer surrounds for high SPL performance. Wind, water or engine noise will not drown them out. Speakers are UV resistant in a marine grade IPX3(IPX5 from front)weather resistant and include RGB perimeter illumination and go through 300 hours of salt spray testing. And they're Infinity - ready to make amazing music on the water. Whether it's a daily scrub down, a picnic in a quiet cove or an all-out race across high swells, Infinity has the right configuration for your craft.

Features:

Plus One™ Woofer Cones
Plus One cones provide more overall speaker-cone area than other cones in its class giving them higher sensitivity, increased low-frequency output and more distinguished musical character.

Convertible Design
To increase loudspeaker acoustics and installation versatility, the 8" (200mm) Marine Three-Way Convertible can be coaxially mounted or separated and installed as a component system. This is handy for working around placement option restrictions.

Perimeter Illumination
Unique and eye-catching RGB illumination can display seven colors out of the box - or an almost unlimited number of colors when connected to an external lighting controller.

SSI (Switch-Selectable Impedance)
New Infinity Kappa Marine 10" (250mm) woofer features an exclusive dual impedance switch that lets you choose either 2- or 4-ohm load impedance option. SSI lets you reconfigure your system with the flip of a switch. (Not available from any other manufacturer.)

Mylar Tweeters with Integrated Grilles
Weather resistant tweeters deliver smooth highs and increased power handling for more natural sound from vocals, cymbals, horns and pianos. (Grill mounted tweeters allow the front of the woofer cones to be sealed.)

One-piece Polymer basket
The polymer basket is durable over time even after prolonged exposure to sun, salt and moisture. Rubber surrounds are more reliable than foam and offer better edge protection.

High Sensitivity
A high sensitivity rating combined with above-average continuous power handling makes it one of the loudest boat speakers available without sacrificing clarity, fullness and musical character.

Voicing of Speakers
Speakers are individually voiced to ensure they deliver Infinity's true sonic signature. This means that specifications as well as speaker characteristics are considered when tuning and authenticating the signature Infinity sound. This is part of the development process spearheaded by the leading transducer engineers in the world to provide the best listening experience at any price point.

Harman Standard Reliability Testing
Infinity speakers undergo a testing process that would destroy lesser speakers. Infinity freezes them, bakes them, shakes them, blasts them with ultraviolet light and drives them at full power for days at a time.

Specifications:

  • Power Handling: 300 watts RMS, 900 watts peak power
  • Sensitivity: 89 dB at 2.83 volts
  • Frequency Response: 20 - 2KHz
  • Voice Coil Diameter: 2 in. (49.5mm)
  • Impedance: 2 and 4-ohms, Switch Selectable Impedance (SSI™)

All About Your ATV300:
How To Set Up Your ATV300:
Inputs, Wires, and Controls on Your ATV300:
How To Connect a Headunit to your ATV300:

Description:

The Rockville ATV300 is a mono amplifier for your motorcycle, UTV, ATV, or other powersport application. It will deliver 300w RMS @ 2 ohms. We dyno-test the amp to make sure you get the power we promise. This amp is specifically designed to power a subwoofer or 2.

This amp is IP65 which means even if you submerged it in water for a few seconds it would still function fine. This means that you do not need to worry about your amp breaking when you spray down your vehicle.

This amp is super compact making it easy to install into tight spaces.

If you want a waterproof and high performing powersport amplifier to power a subwoofer or 2 that will last for many years then this is a great option for you.

Features:

  • Rockville ATV300 Mono UTV/Motorcycle/ATV Amplifier 
  • Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
  • 2 Ohms: 300 Watts  
  • 4 Ohms: 160 Watts 
  • Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc):
  • Peak 2 Ohms: 1200 Watts
  • IP65 waterproof rating
  • This is one of the only amps on the market that is IP65. That means even if you submerged it for a couple of seconds it would work fine
  • All inputs and wire wiring is sealed and covered
  • Conformal coated circuit board
  • Anti rust materials
  • Micro Size amplifier can easily fit in tight spaces
  • Digital Class D Audio Topology 
  • Distortion(THD): ≤0.5% 
  • Full Range/Low Pass/High Pass Configurable 
  • High Input (Speaker level Input) 
  • Low Pass Filter: 32Hz-320Hz 
  • Subsonic High Pass Filter: 20Hz-60Hz 
  • Status Mode LED Indicator 
  • Waterproof sheath RCA Input  
  • High-Speed MOSFET Power supply 
  • Frequency Response: 20Hz-22KHz 
  • Signal to Noise Ratio:  (1 Watt into 4 Ohms) ≥80dB 
  • Low Input Sensitivity: 0.2V-6V 
  • Speaker/High level Input Sensitivity: 0.5V-15.5V 
  • Fuse Rating: 35A 
  • Dimensions (Inches): 8.66” L x 3.74” W x 1.73” H

How to install an amplifier in your UTV:


Video of RWK8ATV:


Features:

  • Rockville RWK8ATV 8 AWG Gauge Amplifier/Amp Installation Wire Kit For Motorcycle/RZR/ATV/UTV
  • 6 Foot 8 Gauge 100% OFC, Red Flexible Power Cable with 3' Black Poly Woven Mesh to better resist chemicals in the battery compartment
  • 6 Foot 8 Gauge 100% OFC, Black Flexible Ground Cable
  • (2) 4 Foot 16 Gauge 100% OFC black Flexible Speaker Cables Protected by black nylon mesh
  • 6 Foot Pre-terminated ring terminals make connections to the battery simple
  • (1) Silver AGU Fuse Holder - Clear Shell and Clear Blue Bottom Bracket with Blue Waterproof Ring
  • (1) 60A AGU Fuse
  • (2) Ring Terminals
  • (2) Spade Terminals
  • (4) Speaker Cable Terminals
  • (4) Washers
  • (10) White Cable Ties
  • (1) hexagon spanner
Shipping & Returns

Row content