(2) AKG P170 Studio Pencil Microphones Instrument Drum Microphones+Condenser Mic

Package Includes:

• (2) AKG P170 Studio Condenser Pencil Microphone Recording Overhead Instrument Mic
• (1) Rockville RCM01 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount

---

Description of P170:

The P170 is a small-diaphragm condenser microphone for recording of overheads, percussions, acoustic guitars and other strings. Its lightweight 1/2-inch true condenser transducer diaphragm delivers outstanding clarity and transient response.

The P170 utilizes the experience of sound engineers from around the world and is considered an affordable alternative to the legendary AKG C451 B.

Features:

• AKG P170 Studio Condenser Pencil Microphone Recording Overhead Instrument Mic
• Rugged all-metal body and robust design withstands tough day-to-day use
• Switchable attenuation pad for high SPL applications up to 155 dB SPL
  
• Audio frequency bandwidth: 20 to 20000 Hz
  
• Equivalent noise level: 19 dB-A
  
• Sensitivity: 15 mV/Pa 
• Signal to Noise: 75 dB-A
  
• Preattenuation Pad: -20 dB
  
• Electrical impedance: =200 Ohms
  
• Recommended load impedance: =1000 Ohms
  
• Polar Patterns: Cardioid
  
• Powering Interface
  
• Voltage: 44 to 52 V
  
• Current: =3 mA
• Audio Output:
  
  • Type: Balanced XLR
    
  • Gender: Male
  • Contacts: 3-pin

• Height: 6.3"
  
• Diameter: 0.87"
  
• Net Weight: 0.29 lbs.

---

 

 

How to Setup a Rockville Condenser Microphone with Your Computer:

Video of RCM01:

Unboxing Video of RCM01:

Authorized Rockville Dealer

The Rockville RMC01 condenser microphone performs better than famous branded microphones that cost over $100.

Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM01 amazing in studio applications.

The full metal construction makes the RCM01 tough enough for Live sound applications as well!

Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!

Quality built inside and out!
The microphone is made of all metal. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ – 20KHZ!  The mic sounds crystal clear sound with no distortion!

The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.

The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.

Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.

What's Included:

• RCM01 Condenser Microphone
  
• 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device we need to update on ebay amazon, website, etc
  
• 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
  
• Metal shock mount
  
• Anti-wind foam cap
  
• Owners Manual
  
• Warranty card
  

Features:

• Rockville RCM01 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
• RCM01 condenser microphone
  
• Full metal high quality construction
  
• Polar Pattern: Internally Polarized Condenser Cardioid Design
  
• Large diaphragm for smooth, natural sound and low noise
  
• Power Requirements: 48V DC Phantom Power
  
• Uni-directional
  
• Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ)
  
• Output impedance: 200O±30%(at 1kHz)
  
• Standard operating voltage: 3V
  
• Operating voltage range: 1.5V-10V
  
• Current consumption: less than 500uA
  
• Voltage deduction characteristic: within 3dB at 2V
  
• S/N ratio: More than 24dB
  
• Frequency Response: 30Hz - 20 KHz
  
• Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz
  
• Load impedance: Greater or = to 1000 Ohms
  
• Equivalent Noise level: Less than 18dB A (IEC581-5)
  
• Max. Input SPL: 126dB(THD=1.0% at 1kHZ)
  
• Electrical current: Greater than 4.8Ma
  
• Microphone body net weight:325 Grams (0.72 Pounds)
  
• Microphone Max.diameter 48mm (1.89” inches)
  
• Microphone Length 157mm (6.18” inches)
  
• Microphone material: steel grille + Zinc alloy (handheld part)
  
• PCB Layout: Surface mount

Row content