Rockville RCM01 Studio Recording Condenser Microphone Mic+Shock Mount+Shield

• (1) Rockville RCM01 Pro Studio Recording Condenser Microphone
• (1) Rockville ROCKSHIELD 3 Large Studio Mic Isolation Shield with Sound Dampening Foam

Video of RCM01:

Unboxing Video of RCM01:

The Rockville RMC01 condenser microphone performs better than famous branded microphones that cost over $100.

Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The frequency pick up pattern makes the RCM01 amazing in studio applications.

The full metal construction makes the RCM01 tough enough for Live sound applications as well!

Multiple connection options!
This microphone can be used in multiple ways. You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include both cables! We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer!

Quality built inside and out!
The microphone is made of all metal. It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ – 20KHZ!  The mic sounds crystal clear sound with no distortion!

The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use. We use only top components that under-go extreme testing by our own audio engineers.

The last thing that I need to mention and call out is that our product is very sturdy. Let me explain. When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.

Best Value
After testing our Rockville condenser mics against mics that cost 300% more money, we found ours to be as good or better than the ones we tested against.

What's Included:

• RCM01 Condenser Microphone
  
• 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device we need to update on ebay amazon, website, etc
  
• 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power
  
• Metal shock mount
  
• Anti-wind foam cap
  
• Owners Manual
  
• Warranty card
  

Features:

• Rockville RCM01 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
• RCM01 condenser microphone
  
• Full metal high quality construction
  
• Polar Pattern: Internally Polarized Condenser Cardioid Design
  
• Large diaphragm for smooth, natural sound and low noise
  
• Power Requirements: 48V DC Phantom Power
  
• Uni-directional
  
• Sensitivity: -27dB±2dB(0dB=1V/Pa at1kHZ)
  
• Output impedance: 200O±30%(at 1kHz)
  
• Standard operating voltage: 3V
  
• Operating voltage range: 1.5V-10V
  
• Current consumption: less than 500uA
  
• Voltage deduction characteristic: within 3dB at 2V
  
• S/N ratio: More than 24dB
  
• Frequency Response: 30Hz - 20 KHz
  
• Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz
  
• Load impedance: Greater or = to 1000 Ohms
  
• Equivalent Noise level: Less than 18dB A (IEC581-5)
  
• Max. Input SPL: 126dB(THD=1.0% at 1kHZ)
  
• Electrical current: Greater than 4.8Ma
  
• Microphone body net weight:325 Grams (0.72 Pounds)
  
• Microphone Max.diameter 48mm (1.89” inches)
  
• Microphone Length 157mm (6.18” inches)
  
• Microphone material: steel grille + Zinc alloy (handheld part)
  
• PCB Layout: Surface mount

Video of ROCKSHIELD 3:

Includes:

• 5 Panel Mic Isolation Shield
• Hardware to Mount unit to your mic stand
• 5/8” Mic Adapter
• Desktop mic attachment

RockShield 3
Rockville’s Rockshield 3 studio microphone isolation shield is the latest addition to our ever growing line of Pro Audio studio accessories. Featuring 2-inch-thick high density acoustic foam, the RockShield 3 keeps unwanted outside audio waves and vibrations from affecting your recordings. By creating an acoustic boundary around the microphone, vocal audio flow is improved. Your voice is redirected to the microphone, meanwhile room reflections are prevented from directly entering the recording area. The end result is you will achieve a crisper and cleaner sound. This shield can be mounted to compatible microphone stands or used in a fixed location, like a countertop/tabletop. Easy installation and studio quality performance will quickly make the Rockshield 3 your go-to sound dampening isolation shield.

Features:

• RockShield 3 Pro Audio Acoustic Microphone Isolation Shield
• Keeps Excessive Room Ambience and Off Axis Sound from interfering with your microphone when recording acoustic and vocal tracks
• Isolates Directional Microphones from Off Axis Coloration
• Limits External Bleed from Unintended Sound Sources
• Features a 2-Inch-Thick High Density Pyramid Acoustic Foam front and a vented metal back plate for the Best Noise Reflection Reduction
• Can be used in fixed location
• Stand mountable
• Provides Vocal Booth Style Recordings with Minimal Footprint
• Professional Studio-Grade
• Rugged Finish Makes This Easy to Transport
• Tri-Pod Foot Design for Stability on Flat Surfaces
• 3/8 Die-Cast Metal Threads 
• Mic Stand with 5/8 Adapter
• The shield is made of pure high-grade steel
• Number of Panels: 5 pcs
• Dimensions Each Panel: 6.3'' x 12.2'' inch
• Dimensions Assembled Unit: 17.5'' x 16.1'' x 7'' inch

The Rockville Difference:

Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!

Row content