Rockville RCM02 Pro Studio Recording Condenser Microphone Mic+Shock Mount+Stand
Product Description
- (1) Rockville RCM02 Pro Studio Recording Condenser Microphone
- (1) Rockville RDMS70 Desktop Mic Stand with Boom+Steel Round Base+Adjustable Height
Authorized Rockville Dealer
How to Setup a Rockville Condenser Microphone with Your Computer:
Video of RCM02:
Unboxing video of RCM02:
Description:
The
Rockville RCM02 condenser microphone performs better than famous branded
microphones that cost over $125. This model is similar to our RCM01
however it is made of aluminum, and the frame is slightly larger. We
highly recommend this design. We also upgraded this model to a high end
metal anti wind cap! This model is an amazing upgrade to our top selling
RCM01 model!
Multi-Purpose
Designed for crystal clear capturing of vocals, acoustic and amplified
instruments, as well as room reverb. The frequency pick up pattern makes
the RCM02 amazing in studio applications.
The aluminum construction makes the RCM02 tough enough for Live sound
applications as well!
Multiple connection options!
This microphone can be used in multiple ways. You can connect this to
the phantom power of your mixer or you can connect it directly to your
computer sound card. We include both cables! We include a cable to
connect it to your mixer as well as a cable to connect the mic to your
computer!
Quality built inside and out!
The microphone is made of aluminum. It is very rugged and tough like you
would expect from any Rockville product. This microphone has a large
diaphragm which is what enables our mic to deliver a wider range of high
and low frequencies than our competitors. Our frequency range is tested
at 30HZ – 20KHZ! The mic sounds crystal clear sound with no
distortion!
The PCB (circuit board) uses surface mounted components which is the
same method the expensive brands use. We use only top components that
under-go extreme testing by our own audio engineers.
The last thing that I need to mention and call out is that our product
is very sturdy. Let me explain. When you are recording, you do not want
even the slightest noises coming from your mic. The microphone consists
of a casing and there is a cartridge inside the case. You do not want
that cartridge moving around. We made sure to adjust our mechanism and
ensure the cartridge is firmly in place and not creating any unwanted
noises.
Best Value
After testing our Rockville condenser mics against mics that cost 300%
more money, we found ours to be as good or better than the ones we
tested against.
What's
Included:
- RCM02
Condenser Microphone (made of aluminum!)
- 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device we need to update on ebay amazon, website, etc
- 10 foot
100% Copper XLR to XLR cable to connect to any mixer with phantom
power
- Metal
shock mount
- Metal
Anti-wind foam cap
- Owners
Manual
- Warranty
card
Features:
- Rockville
RCM02 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount
- Aluminum high quality construction
- Polar Pattern: Internally Polarized Condenser Cardioid Design
- Large diaphragm for smooth, natural sound and low noise
- Power Requirements: 48V DC Phantom Power
- Uni-directional
- Sensitivity: -29dB±2dB(0dB=1V/Pa at1kHZ)
- Output impedance: 200O±30%(at 1kHz)
- Standard operating voltage: 3V
- Operating voltage range: 1.5V-10V
- Current consumption: less than 500uA
- Voltage deduction characteristic: within 3dB at 2V
- S/N ratio: More than 24dB
- Frequency Response: 30Hz - 20 KHz
- Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz
- Load impedance: Greater or = to 1000 Ohms
- Equivalent Noise level: Less than 18dB A (IEC581-5)
- Max. Input SPL: 126dB(THD=1.0% at 1kHZ)
- Electrical current: Greater than 4.8Ma
- Microphone body net weight:380 Grams (0.84 Pounds)
- Microphone Max.diameter 51mm (2” inches)
- Microphone Length 215mm (8.46” inches)
- Microphone material: steel grille + Aluminum (handheld part)
- PCB Layout: Surface mount
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.
How to Set Up Your RDMS70:
Video of RDMS70:
- Rockville RDMS70 Desktop Mic Stand with Boom and Steel Round Base and Adjustable Height
- Heavy-duty weighted steel round base
- Adjustable Height
- Boom arm for precise positioning
- Rubber pad for extreme stability prevents sliding
- Low profile design
- Scratch-resistant powder coated finish
Specifications:
- Boom length: 13.8" (40cm)
- Height adjustment: 10.63" to 15.75" (27cm – 40cm)
- Base Diameter: 6.3" (16cm)
- Thread Size: 3/8"
- Weight: 4.85 lbs (2.2 kgs)
Shipping & Returns
Row content
