(2) JBL JRX212 1000w 12" DJ P/A Speakers+(2) 18" 1400w Subwoofers+Powered Mixer
Product Description
- (2) JBL JRX212 1,000 Watt 12" Inch 2-Way DJ P/A Speaker Floor Wedge Monitor - NEW!
- (2) JBL Pro JRX218S 1,400 Watt 18" Inch Compact Passive Subwoofer DJ Sub
- (2) Rockville RSP36 36" Mounting Pole from Subwoofer to Speaker, Heavy Duty Steel
- (1) Rockville RPM1470 14 Channel 6000w Powered Mixer w/USB, Effects/14 XDR2 Mic Pres
Authorized JBL Dealer!
Features of JRX212:
- JBL Pro JRX212 12" 1000 Watt 8 Ohm Passive PA/DJ Speaker
- JBL 12 in low frequency driver with a 64 mm (2.5 in) diameter edge wound ribbon voice coil
- JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver
- Advanced network topology crossover design
- High-voltage capacitors and inductors with massive cores and heavy gauge wire
- Progressive Transition™ high frequency waveguide
- 19 mm (.75 in) MDF (Medium Density Fiberboard) enclosure
- SonicGuard™ protects the high frequency driver from excess power without interrupting the performance.
- Non-resonant, all-steel handles
- 18-gauge hexagon perforated, steel grille Dual-angle pole-mount socket allows the speaker to tilt 10°
Specifications:
- Power Rating : 250 W RMS / 1000 W Peak
- Frequency Range (-10 dB) : 60 Hz - 20 kHz
- Frequency Response (±3 dB) : 80 Hz - 18 kHz
- Sensitivity (@1m) : 98 dB SPL (1w/1m)
- Nominal Impedance : 8 ohms
- Recommended Amplifier Power : 250 W to 500 W into 8 ohms
- Maximum SPL : 128 dB
- Nominal Dispersion : 90º x 50º
- Crossover Frequency : 2.1 kHz
- Dimensions (H x W x D) : 584 mm x 399 mm x 325 mm (23 in x 15.7 in x 12.8 in)
- Weight : 19.5 kg (43 lb)
- High Frequency Driver : JBL 2414H-C 1" exit compression driver mounted on Progressive Transition™ Waveguide
- Low Frequency Driver : JBL M112-8
- Input Connectors : Neutrik® Speakon® NL-4 (x1); .25 in
- TS phone jack (x1); parallel
- Grille : 18-gauge, powder-coated steel
- Mounting & Suspension : 36 mm, dual-angle pole-mount socket
Authorized JBL Dealer
Features of JRX218S:
- JRX218S 18" Compact Subwoofer
- 18 in. compact subwoofer.
- 350 W (continuous), 1400 W (peak) power capacity.
- Enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) and is carpeted in black
- Top mounted, cast aluminum 36 mm pole mount receptacle for the optional SS3BK pole to facilitate use of the JRX218S as a base for a mid-high speaker cabinet.
- Non-resonant, all steel handles
- 18-gauge perforated steel grille
Details:
- Power Rating : 350 W / 1400 W
- Frequency Range (-10 dB) : 34 Hz - 250 Hz
- Frequency Response (±3 dB) : 53 Hz - 250 Hz
- Sensitivity (@1m) : 98 dB
- Nominal Impedence : 4 ohms
- Recommended Amplifier Power : 350 W to 700 W into 4 ohms
- Maximum SPL : 133 dB peak, @1 m (3.3 ft)
- Dimensions (H x W x D) : 605 mm x 508 mm x 551 mm (23.8 in x 20.0 in x 21.7 in)
- Net Weight : 32.2 kg (71 lb)
- Low Frequency Driver : M118-4
- Input Connectors : Neutrik® Speakon® NL-4 (x2); parallel
- Grille : 18-gauge, powder-coated steel
How to Set Up your RSP36: Features of RSP36: Video of RPM1470:
Description of RPM1470:
The Rockville RPM1470 is a 14-channel powered console mixer with USB input
and Bluetooth. There were a few goals we had when designing this mixer. The first one was it had to have the clearest sound quality with the best quality mic preamps. We manufactured this mixer with XDR2 low noise mic preamps. These are some of the best sounding mic pre’s on the market. They compete in quality with any brand on the market! The next goal we had was versatility. This mixer has aux sends and returns on each channel so you can route your external effects easily. We also built in a 24-bit digital effects processor that sounds great. We didn’t include 99 effects which all sound the same. Rather we included 16 solid effects that are each useful. You can customize each effect in the FX control section of the mixer. The last goal was to include a built-in amplifier that is powerful enough for your main speakers so that you can use this mixer for large events with over 500 guests. Features:
We tested this and we ran the mixer to (2) Mackie C300Z speakers, and even with the volume turned up half way these were filling an extremely large room with sound! We also tested these with dual 15” DJ speakers and really cranked them and the sound of the highs and lows were crisp and clean. The great thing about this is the amp does not overheat even when cranking it for hours straight. The power amp built into this mixer is 500 x 2 RMS @ 8 ohms and 750 x 2 RMS @ 4 ohms. We rate the RMS very strictly the way famous brands like Mackie rate their items. We also supply you with program and peak ratings, but RMS is the true continuous output power you should look at.
Other great features are a dual 7-band master EQ, a 4-band EQ on each channel, an EQ kill switch, and pad and solo buttons on each channel. Rounding things out, we added a USB input that has 2 functions. It can play back your audio tracks. But what is really cool, is that you can record your main mix onto the USB or onto an SD! We also added Bluetooth to this mixer to give you all the latest and greatest options.
90 Day Money Back Guarantee
The price point we are selling this at is about a third of what any other brand would charge. On top of this, we are offering a
90 day money back guarantee including return shipping. If
you do not love this mixer, you can send it back and get all your money back and we will even cover the cost of return shipping. Just be sure to send it back including the original packaging.
Shipping & Returns
Row content
%20JBL%20JRX212%201000w%2012%22%20DJ%20P/A%20Speakers+(2)%2018%22%201400w%20Subwoofers+Powered%20Mixer){kind=link}