Crown XLi2500 1500w Amplifier+JBL Dual 10" Subwoofer 4 Restaurant/Bar/Cafe/Patio

$1,112.00 $1,269.00 Sold out
Shipping calculated at checkout.
Product Description
Package Includes:
  • (1) Crown Pro Audio XLi2500 1500 Watt 2 Channel DJ/PA Power Amplifier Amp XLI 2500
  • (1) JBL Control SB210 Dual 10" Indoor/Outdoor Subwoofer 4 Restaurant/Bar/Cafe/Patio

Authorized Crown Dealer!

Description of XLI2500:

Powerful. Reliable. Affordable.
The XLI Series of power amplifiers from Crown® represents a new era in affordable, quality power amplification. All four models in the series are powerful, rugged and reliable. They are suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

Features include RCA and XLR inputs, user selectable input sensitivity of 0.755V or 1.4V, Speakon and binding post outputs, stereo/parallel/bridge-mono mode, power/fault/signal presence/clip indicators, forced-air cooling; and protection against shorts, no-load, on/off thumps and radio-frequency interference.

With over six decades of experience designing and building rock-solid products, Crown is the standard in amplifier technology. So check out the affordable Crown XLI Series. They are a powerful argument for quality and value!

Features:

  • Crown Pro Audio XLi2500 1500 Watt 2-Channel DJ/PA Power Amplifier
  • RMS Power @ Dual 4 Ohms: 750 W
  • RMS Power @ Dual 8 Ohms: 500 W
  • RMS Power @ 8 Ohms Bridged: 1500 W
  • Frequency Response: 20 Hz - 20kHz
  • Signal-to-Noise Ratio: > 100 dB
  • Intermodulation Distortion: =/< 0.35%
  • Slew Rate: >10V/us
  • Voltage Gain: 33 dB
  • Damping Factor: 8 Ohms, 10 Hz to 400 Hz
  • THD: < 0.5%
  • Input Sensitivity: 0.775V
  • Input Impedance: 20 kOhms
  • Crosstalk: -82 dB at 1 kHz
  • Line Output Level: 1V into 10 kOhms
  • Phantom Power: 15 VDC
  • AC Line Voltages Available: Universal Power Supply. Line voltage tolerance +15%, -20%
  • IEC Power Connector: 15A
  • Stereo/parallel/bridge-mono mode
  • User selectable input sensitivity - 0.775V and 1.4V
  • Efficient forced-air cooling prevents excessive thermal buildup
  • Electronically balanced RCA & XLR inputs; binding post and Speakon ® outputs
  • Two level controls, power switch, power LED, and six LEDs which indicate signal presence, clip and fault for each channel
  • Protection against shorts, no-load, on/off thumps and radio-frequency interference
  • Product Dimensions: 19" x 3.5" x 12.4" inches
  • Product Weight: 29.7 Lbs.

Description of Control SB-210:

The Control SB210 provides low frequency reinforcement for a wide variety of sound system applications. Its compact size, high output and outdoor capable design makes it one of the most versatile subwoofers in the installation market.


Features:

  • JBL Control SB210 Dual 10" Indoor/Outdoor Subwoofer 4 Restaurant/Bar/Cafe/Patio 
  • 2 x 250 mm (10 in ) Aluminum/ Ceramic Composite Cone Drivers.
  • 400 W Power Handling.
  • Fully Outdoor Capable Design.
  • SonicGuard™ Overload Protection.
  • 13 x M6 Suspension Inserts for Optional U-Bracket.
  • AV Shielded.
  • Compact, Low Profile Design.

Specifications:

  • Frequency Range: 42 Hz - 200 Hz (-10 dB)
  • Power Capacity: 800 W Continuous Program Power; 400 W Continuous Pink Noise
  • Nominal Sensitivity: 95 dB, 1 W @ 1 M in half space (2 in loading)
  • Frequency Response: 48 Hz - 120 Hz ( ± 3 dB)
  • Maximum SPL @ 1m: 122 dB (in half - space)
  • Nominal Impedance: 8 Ohms
  • Minimum Impedance: 7 Ohms at 100 Hz
  • Low Frequency: 2 x 250 mm (10 in) dia., 50 mm (2 in) edge wound ribbon voice coil, Aluminum/Ceramic Composite cone.
  • Enclosure Material: High Impact PolyStyrene (HIPS) w / internal 8 mm polyurethane co-mold.
  • Grille: Thermoset composite coated steel, multi-layer.
  • Overload Protection: SonicGuard™
  • Environmental: IEC 529 IP-X% rating. Exceeds MilSpec 810 for humidity, salt spray, temperature& UV. Passes Mil-STd-202F for salt spray.
  • Terminations: Screw-down terminal strips, zinc plated copper base, nickel-plated metal screw/washers. Accepts up to 9 mm outside, 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to AWG/2.5mm2).
  • Color: Black
  • Dimensions: ( H x W x D) 356 x 590 x 570 mm (14 x 23.3 x 22.5 in.)
  • Net Weight (ea): 17.1 kg (38 lb)
  • Shipping Weight (ea): 19.4 kg (43 lb)
  • Included Accessories: 1 pc MTC-PC4 input panel cover, 4 pcs MTC-210FT floor standing foot,4pcs MTC-210RT foot receptacle for stacking.
  • Optional Accessories: MTC-210UB U-Bracket
Shipping & Returns

Row content