JBL VMA1120 70v 120w Amplifier+(2) White 5.25" Pendant Speakers For Restaurant

Package Includes:

• (1) JBL VMA1120 Commercial/Restaurant 120W 70v Bluetooth Mixer/Amplifier, 5 Inputs
• (1) Pair of JBL Control 65P/T-WH White 5.25" 70v Commercial Pendant Speakers 4 Restaurant

---

Authorized JBL Dealer!

Each speaker has a tap switch that you can select 60w/30w/15w/7.5w. This amplifier is 120 Watts make sure you do not exceed 100 watts in total

Video of VMA1120 :

Features:

• JBL VMA1120 Commercial/Restaurant 120 Watt Bluetooth Mixer/Amplifier with 5 Inputs
• 5-Input Mixer
• Supports USB Drives and Bluetooth
• 120W, 1-Output Amplifier
• Euroblock, RCA, and 1/4" Inputs
• Euroblock Outputs
• Per-Channel Bass and Treble Controls
• Voice-Activated Ducking
• Front-Panel Display and Controls
• Configurable Output Routing
• Includes Rack Mount Kit

Specifications:

• Output Power Per Channel: 120 Watts into 4 Ohms or 8 Ohms
• Insertion Loss: 70 V and 100 V Outputs: 1 dB Max.
• Input Channels: 5
• Output Channels: 1
• Tone Control: Bass and Treble non-detented potentiometers on each channel
  • Bass: ±14 dB @ 50 Hz
  • Treble: ±14 dB @ 10 kHz
• Input Sensitivity:
  • Mic Input: 5.5 mVrms
  • Line Input: 1.3 Vrms
  • RCA Input (Stereo In): 130 mVrms
• Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output
  • 4/8 Ohms Output: 20 Hz to 20 kHz, ±2 dB
  • 70 V/100 V Outputs: 80 Hz to 15 kHz ±3 dB
• Total Harmonic Distortion (THD): Power Amp Output: <0.5%, 20 Hz to 20 kHz
• Signal to Noise Ratio: >76 dB
• Input Impedance:
  • Mic: 400 Ohms
  • Line: 20k Ohms
  • RCA: 50k Ohms
• Phantom Power: 27 VDC
• Crosstalk: -70 dB
• Nominal Input Voltages: Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz
• Minimum Load Impedance:
  • Low Impedance Output: 4 Ohms
  • 70 V Output: 40 Ohms
  • 100 V Output: 80 Ohms
• Operating Temperature: 32°F to 95°F
• Humidity: 95% RH
• Storage Temperature: -4°F to 185°F
• Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches
• Product Weight: 20.2 Lbs.

---

Authorized JBL Dealer! 

Video of Control 65P/T-WH :

Description:

Pair Compact Full-Range Pendant Speakers
Control 65P/T incorporates JBL’s exclusive RBI Radiation Boundary Integration technology to provide very consistent, wide coverage throughout the listening space.

Features:

• Pair JBL Control 65P/T-WH White 5.25" 70v Commercial Pendant Speakers For Restaurant
• RBI Radiation Boundary Integrator Technology
• 120° conical coverage
• 5.25" (130 mm) low-frequency with silk-dome tweeter for high-fidelity sound quality
• 75 Watts, 8 ohms and 60W multi-tap transformer
• Color: White

Specifications:

Frequency Response (-10 dB)	55 Hz – 20 kHz
Frequency Range (±3 dB)	78 Hz – 18 kHz
Power Capacity	75 Watts Continuous Pink Noise Power (with 300 Watts peaks) 150 Watts Continuous Program Power
Nominal Sensitivity	86 dB
Nominal Coverage Angle	120° (+20°/-10°)
Directivity (Q)	5.3
Directivity Index (DI)	7.2 dB
Rated Maximum SPL @ 1m	105 dB continuous pink noise, 111 dB peak
Rated Impedance	8 ohms
Transformer Taps	70V: 60W, 30W, 15W & 7.5W 100V: 60W, 30W, 15W
Transformer Insertion Loss	0.5 dB @ 7.5 W, 0.5 dB @ 15 W, 0.6 dB @ 30 W, 0.7 dB @ 60 W
LF Driver	130 mm (5¼ in) polypropylene-coated paper with pure butyl rubber surround, 25 mm (1 in) copper voice coil, vented fiberglass resin voice coil-former
HF Driver	20 mm (¾ in) textile soft-dome, neodymium magnet assembly, ferro-fluid cooling, aluminum voice coil former
Enclosure Material	High impact polystyrene
Grille	Zinc-plated steel grille with powder-coat finish, foam backing (removable for painting)
Environmental	Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IP44 capability per IEC 529 – splashproof rating.
Termination	Two removable locking euro-block 2-pin connectors with screwdown terminals for bare wire. Connectors paralleled for input and loop-thru. Max. wire 12 AWG (2.5 mm2). Rubber terminal covers included.
Suspension	Two identical suspension systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple™ brand adjustable-height cable fasteners for infinitely adjustable height. Cables have SWL rating of 45 kg (99 lb).
Safety Agency Ratings	Speaker listed per UL1480, transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple®-brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 & Class 3426-81.
Dimensions	234 mm (9.3 in) diameter x 259 mm (10.2 in) height to top of cabinet. 279 mm (11.0 in) to top of suspension bracket.
Net Weight (ea)	3.7 kg (8 lbs)
Shipping Weight (pair)	8.7 kg (19 lbs)
Included Accessories	Two suspension cable systems (see “Suspension”, above), two 2-pin removable locking euro-block connectors, two rubber covers for euro-block connectors
Optional Accessories	MTC-PC60 top panel / terminal cover
Colors	Available in white (-WH). Paintable.

---

Advantages of buying from an authorized seller:

• Best prices - We sell all JBL Products at great prices
• Full Factory Warranty
• Lifetime Customer Service by JBL product experts
• Guaranteed legitimate and authentic merchandise

Please note: If you purchase JBL from an un-authorized seller then you are taking a big risk. You will not have any manufacturer warranty, and there is no guarantee that the item is authentic, brand new, or even working.

Row content