New Mackie DL32R Wireless Digital Recording Mixer 4 lPad+32-Channel Snake Cable

• (1) Mackie DL32R 32 Channel Wireless Digital Recording Rackmount Mixer For lPad
• (1) Rockville SX32100 32 Channel (4 returns) 100 Foot XLR Snake Cable, 100% OFC

Videos of DL32R:

The DL32R delivers 32-channels of powerful digital mixing that’s completely controlled wirelessly from your iPad, freeing you to get in the mix like never before. It’s got convenient direct-to-drive multi-track recording/playback and an ultra-compact 3U rackmount design that lets you ditch the snake once and for all.

Fully loaded with DSP on each of the 32 Onyx+™ mic pres and 28 busses, the DL32R provides the power needed for professional applications.

The industry-proven Master Fader™ control app delivers extremely intuitive control over everything, including the ability to digitally recall each and every setting for incredibly fast setup. Control everything from anywhere with the Mackie DL32R.

•     Mackie DL32R 32-Channel wireless digital mixer
•     32 Onyx+ recallable mic pres with wireless control
•     14 fully-assignable XLR outputs
•     Stereo AES digital output
•     Total recall of all settings
•     3U rackmount design ready for road or install
•     Card slot for Dante expansion card

•     Complete control from your iPad
•     No set FOH position – mix from anywhere
•     Personal monitor mixing via iPad, iPhone or iPod touch
•     Supports up to 10 separate iOS devices at once
•     Multiple engineers can work from a single mixer
•     Ditch the snake – place the mixer anywhere

•     32x32 USB 2.0 audio interface for Mac or PC
•     24x24 recording/playback direct to USB 2.0 hard drive
•     Wireless control over all direct-to-disk recording/playback functions
•     Record the show for later mixdown
•     Play back intermission music and backing tracks
•     Perform a virtual soundcheck
•     Amazing recording interface for the studio
•     Utilize Mac or PC audio plug-ins in a live environment

•     36 input channels with 4-band PEQ + HPF, gate and compression
•     2 stereo-linkable input channels
•     4 stereo-linkable return channels 1
•     28 output busses with 4-band PEQ + HPF/LPF,
•     31-band GEQ, comp/limiter and alignment delay
•     14 stereo-linkable aux sends
•     6 stereo-linkable matrix busses
•     6 stereo-linkable subgroups 1
•     Main L/R busses
•     6 VCAs and 6 mute groups
•     3 stereo FX processors with dedicated sends and returns
•     Full I/O routing with A/B sources per channel
•     Modern and Vintage options per processor

• Intuitive and easy to master
• Fast navigation with view groups and overview
• Quick setup with tons of factory and user-definable presets
• Access limiting prevents unwanted adjustments
• Complete offline operation
• Easy and frequent updates via App Store

Details:

• General Digital
• Sample Rate:  48 kHz
• A/D/A Bit Depth:  24-bit
• System Latency:
• Analog Input > Main Bus > Analog Output  1.5 ms
• 0 dBFS Reference:  +22 dBu
• Frequency Response
• All inputs to all outputs:  ±0, –1 dB, 20 Hz to 20 kHz
• Distortion (THD)
• Mic input to main output, 1 kHz, –1 dBFS:  <0.005%
• Noise / Dynamic Range / Signal-to-Noise Ratio
• Equivalent Input Noise (EIN)
• 150  termination:  –128 dBu
• Crosstalk
• Analog XLR input-input:  <–105 dB @ 1 kHz (min. gain)
• <–80 dB @ 1 kHz (max. gain)
• Analog XLR / TRS output-output:  <–100 dB @ 1 kHz
• Signal-to-Noise Ratio
• (ref +4 dBu, one channel and main fader at unity,
• A-weighted):  92 dB
• Output Noise (A-weighted)
• Muted Output:  –90 dBu
• Dynamic Range
• Analog Input to Analog Output
• (One channel and main fader at unity, A-weighted):  109 dB
• Analog Input
• (Unity gain, to analog clipping, –60 dBFS signal,
• A-weighted):  111 dB
• Analog Output
• (To analog clipping, –60 dBFS signal, A-weighted):  111 dB
• CMRR:  >70 dB @ 1 kHz (60 dB gain)
• Analog Inputs 1-32
• Connectors
• 1-24:  XLR Balanced
• 25-32:  Combo XLR / TRS Balanced
• XLR Mic Pre:  Onyx+
• Input Impedance
• 1-24:  3 k
• 25-32:  3 k mic [XLR]
• 30 k line [1/4"]
• Max Input Level
• XLR:  +21 dBu
• 1/4":  +30 dBu
• Gain [digitally controlled analog]
• XLR:  0 to 60 dB [3 dB steps]
• 1/4":  –20 to 40 dB [3 dB steps]
• 48V Phantom Power (XLR):  48 VDC, 10 mA max per mic,
• with up to 16 simultaneously.
• 5 mA max per mic,
• with up to 32 simultaneously.
• Individual digital controller per channel
• Analog Outputs 1-12
• Connectors:  XLR Balanced
• Output Impedance:  600
• Max Output Level:  +21 dBu
• Analog Monitor Outputs L/R
• Connectors:  1/4" TRS Impedance Balanced
• [Supports balanced / unbalanced operation]
• Output Impedance:  240  Balanced,
• 120  Unbalanced
• Max Output Level:  +21 dBu
• Analog Headphone Out
• Connector:  1/4" TRS Stereo
• Max Output Level:  +18 dBu into 600
• +19.5 dBu max into 100 k
• AES Output
• Format:  AES3 Professional,
• 48 kHz, 24-bit stereo
• Connector:  XLR Balanced
• Output Impedance:  110
• USB – Streaming
• Connection:  USB 2.0 High Speed (as a device)
• Connector:  USB-B
• Supported MS Windows
• [Driver installation required]:  Windows 7, 8
• Supported Mac OS
• [Audio Class 2.0 Compliant, no driver required]:  OS X 10.8.4, 10.9
• Audio:  32 in / 32 out, 48 kHz, 16/24-bit
• USB – HDD Recording / Playback
• Connection:  USB 2.0 High Speed (as a host)
• Connector:  USB-A
• Audio:  1-24 channel, 48 kHz, 16/24-bit
• (multichannel .wav)
• Supported Devices:  USB 2.0 / 3.0 Class Compliant HDD
• HDD Format:  FAT32
• Bus Power:  5V, 1A max
• 1 Streaming and HDD Record / Playback are not available simultaneously.
• Networking
• Connection
• [Using Basic Network Option Card]:  100 Mb Ethernet
• Control: Complete
• Simultaneous Control:  10 iOS Devices
• iPad Support
• iOS Version Requirement:  7.1 or greater required
• iPad Version Requirement
• Wireless:  iPad 2, iPad (3rd generation),
• iPad (4th generation), iPad mini,
• iPad mini retina, iPad Air
• Control Application:  Mackie Master Fader App
• Master Fader 3.0 or greater required
• DSP
• 36 input channels with 4-band PEQ + HPF, gate and compression
• • 32 stereo-linkable input channels
• • 4 stereo-linkable return channels (PEQ and compression only)
• 28 output busses with 4-band PEQ + HPF/LPF, 31-band GEQ,
• comp/limiter and alignment delay
• • 14 stereo-linkable aux sends
• • 6 stereo-linkable matrix busses
• • 6 stereo-linkable subgroups (PEQ and compression only)
• • Main L/R busses
• 6 VCAs and 6 mute groups
• 3 stereo FX processors (2 reverb, 1 delay) with dedicated
• sends and returns
• Full I/O routing with A/B sources per channel
• Modern and Vintage options per processor
• Power
• Power Requirements:  100 VAC – 240 VAC, 50 – 60 Hz,
• Universal Supply
• Power Consumption:  100 watts max
• Line Cord:  User-replaceable IEC
• Operating Temperature  0 - 40 °C
• extended ambient temperature]:  32 - 104 °F
• Physical Properties (product)
• Height:  5.4 in / 138 mm
• Width:  19.0 in / 483 mm
• Depth:  17.5 in / 443 mm
• Weight:  18.0 lb / 8.2 kg
• Rack:  3U Rack Spaces
• DL32R 32-channel Wireless Digital Mixer with Master Fader iPad Control:
• Power ~110V USP/N 2042086-00

• Best prices - We sell all Mackie Products at the lowest price as  possible.
• Full Factory Warranty
• Detailed information of all products
• Lifetime Customer Service by Mackie Product Experts
• Guaranteed legitimate and authentic merchandise

Please note: If you purchase Mackie from an  un-authorized seller then you are taking a big risk. You will not have any  manufacturers warranty, and there is no guarantee that the item is  authentic, brand new, or even working.

Description of SX32100:

The Rockville SX32100 snake cable is a heavy duty snake cable ideal for permanent installs, stage rigs, and PA systems.

Not all snake cables are created equally. What makes this model is better is that each wire has an outer nylon jacket for extreme protection. We also have an inner PVC jacket as well. You can step on or even jump o our cables without any issues. In addition there is an aluminum connector that all the cables run through. The purpose of this is that if anyone pulls on the cable , the cable can not break or rip.

This snake will keep your microphone and cable runs tidy and organized. It features 28 send channels with female XLR connectors at the control box and 24 male XLR connectors at the opposite end. There are also 4 return channels with male XLR connectors at the control box and 8 female XLR connectors at the other end of the cable. These cables offer superb output from your mixer as they are 100% copper! The SX32100 comes with a ruggedly built control box and sturdy 1” 100% Oxygen Free Copper cables. We use high quality 3 pin XLR connectors to ensure the highest levels of sound transfer.

Features:

• Rockville SX32100 32 Channel (28 sends + 4 returns) 100 Foot XLR Snake Cable, 100% OFC
  
• Sends: 28 XLR Male - Returns: 4 XLR Female Connectors
• Outer nylon jacket for extreme protection
• Inner PVC jacket for further protection
• Blue aluminum connector makes sure the cable can never break even if someone pulls on it really hard
• 1” thick cable
• 25 gauge 100% OFC conductor                                                                             
• 100% OFC wire and aluminum foil double shielding
• Excellent insulation
• Labeled and numbered ports for quick and easy set up
• Heavy duty steel stage box with handle                                                      
• Unit Weight: 55lbs                                                                                     
• Shipping Weight: 57lbs                                                                              
• Shipping Dimensions: 20 x 20 x 11.4in (51 x 51 x 29cm)

Row content