SKB 1SKB-R2 2U Space Molded Roto Rack Case + FREE Furman Power Conditioner
Product Description
- (1) SKB 1SKB-R2 2U Space Molded Roto Rack Case
- (1) FREE Furman Power Conditioner
Authorized SKB Dealer!
The re-designed
Roto-molded Rack Cases meet the needs of musicians and pro audio
engineers. The Roto Racks include a gasketed full front and rear covers
for easy access.
These re-designed Roto Racks have a exterior design that includes a
recognizable bar design that signifys the rack size on the front and
rear covers with interlocking capabilities for a secure stack with Roto
Racks and the Roto Shallow Racks. Recessed steel, Mil-Spec black twist
latches, and heavy-duty flush handles, front and rear rack rails with a
rack depth of 17.6” so gear can now be mounted front and rear with the
supplied rackmount clips.
The ultimate in American technology with its roto molded tuff shell,
front and rear lids, recessed heavy-duty twist latches, molded in
handles, shock absorbing rubber feet for solid stackability. The unique
molded-in unbendable valance and steel threaded rails with self tapping
screws make the US Series racks convenient to use and the most durable.
Features:
- SKB 1SKB-R2 2U 2-Rack Space Ultimate Strength Series Molded Roto Rack Case
- Roto-molded for strength and durability
- Front and rear gasketed covers
- Interlocking stacking ribs
- New size bar cover design
- Recessed latches
- Heavy-duty flushmount handles
- Rackmount hardware included for secure mounting front or rear
- Roto molded uni-body construction
- Threaded steel rails
- Rear rails included
- Front and rear full size lids
- Recessed latches
- Molded-in handles
- Shock absorbing feet
Specifications:
- Interior Width: 19.00 in (48.26 cm)
- Interior Height: 3.50 in (8.89 cm)
- Interior Cu. Volume: 0.68 cu ft (0.02 cu m)
- Space Units Total: 2
- Rackable Depth: 17.60 in (44.70 cm)
- Exterior Depth: 24.00 in (60.96 cm)
- Exterior Width: 22.40 in (56.90 cm)
- Exterior Height: 6.20 in (15.75 cm)
- Exterior Cu. Volume: 1.93 cu ft (0.05 cu m)
- Min. Temperature: 0.00° F (-17.78° C)
- Carton Length: 23.00 in (58.42 cm)
- Carton Width: 23.00 in (58.42 cm)
- Carton Depth: 6.50 in (16.51 cm)
- Carton Cu. Volume: 1.99 cu ft (0.06 cu m)
- Product Weight: 10.80 lb (4.90 kg)
Advantages of SKB Cases:
- Lifetime SKB Warranty! No questions
asked! No receipts required! For any defective products; Send back to
SKB and they will replace it or repair it!
- Very light-weight!
- Advanced Engineering Giving SKB Superior Stregnth Compared To Any Other Cases On The Market
- Maximum Impact Resistance Protects Your Equipment Better Than Anything Else
- These Cases Can WithStand All Sorts Of Punishment
- Great Value! The Price On SKB Are Extremely Aggressive
- Detailed Information And Dimensions Of All Products
Video of M-8DX+16 SCREWS:
Descriptions:
Call 646-432-4971 with any questions 10:30 AM - 5:30 PM
A Merit Series
Power
Conditioner is the perfect low-cost AC power solution for any rack mount
system. Install an M-8Dx into the top slot of your rack, and the eight
switched outlets in the rear panel will power up and protect all your
equipment up to a 15-amp load. The M-8Dx features two slide out,
swiveling light fixtures to provide discreet illumination of your
equipment on stages, in studios, and in other dark places. A dimmer knob
lets you adjust the lamp brightness to just the right level.The M-8Dx
also features a bright red, three-digit LED voltmeter that displays
incoming voltage.
Applications:
Instrument
Rigs
You've got a rack for
your effects, preamps, tuner...You're going to plug that into the wall. One big spike and your rig is up in smoke. Furman's standard level
surge/spike protection defends your gear from the spikes and surges that
are so common at gigs and practice spots. With Furman's standard level
RFI/EMI filtration, you'll get a quieter tone without pops, crackles,
and the local radio station coming out of your amp. Plus, dual pull-out
lamps let you see your rack without turning the house lights on, while
the digital voltmeter lets you monitor incoming voltage.
Recording
Can't
track down where that noise is coming from. Your mix sounding flat. With
Furman's standard level RFI/EMI filtration you'll lower the noise floor
caused by the dirty AC power coming into your console or DAW. Furman's
standard level surge and spike protection keeps your sensitive digital
equipment from acting funny or burning up due to everyday spikes and
surges. You can even monitor voltage changes, as the digital meter
allows you to keep an eye on the incoming line voltage. With a 15A
capacity and nine total outlets, it's enough to power your whole home
studio.
DJ
Equipment
Bars, clubs and
other event venues have some of the worst power out there - from air
compressors turning on and off to light shows pulling current loads up
and down, the AC power can be a strain on the circuits in your rig.
Furman's standard level protection and filtration keeps the bad stuff
out. The dual pull-out front panel lights also let you discreetly see
your board and gear without distracting from the show on the dance
floor.
Pro
Audio
When
you're out there gigging, you never know what kind of power you're going
to get. The wear and tear on mobile rigs eventually takes it toll -
that's why it's smart to plug into Furman's standard level protection
and RFI/EMI filtration. It keeps your equipment safe and sounding clean.
It keeps your equipment safe and sounding clean, while the digital
voltmeter lets you monitor incoming voltage. Whether you're setting up a
show at the local club or powering up the church band for their next
service, make sure you give them power they can trust.
Surge protection and why it is important:
This is the most important component you will have in your rack. The reason is because if you do not have a good surge protector that is reliable, all your equipment can easily blow out and stop working. A simple surge in voltage coming from the AC outlet can cause this to happen. Get the Furman M-8L and keep your expensive equipment protected!
Features:
Noise
Filtration
AC noise filtering
to reduce radio frequency and electromagnetic interference
(RFI/EMI)
Surge
Protection
Spike &
surge protection ensures equipment stays safe and your power stays
clean
9 Total
Outlets
8 rear panel outlets
and 1 front panel convenience outlet
Digital
Voltmeter
Digital voltmeter
display incoming line voltage
15 Amp
Rating
15 amp rating, with
circuit breaker
"Protection OK"
Indicator
Front panel
indicator LED lets you know that your equipment is being
protected
Wall Wart Spacing
Indicator
Rear outlets have
been spaced to accomodate even the bulkiest of wall warts and
adapters
Front Panel Pull-out
Lights
Two retractable
incandescent light fixtures with dimmer control for convenient rack
illumination
Warranty
Information
There are 2
warranty options available on this product. We will exchange your
product in-house, or you are covered under the manufacturers warranty
since we are authorized Furman dealers.
Specifications:
| Maximum Output Current: | 15 amps |
| Line Cord: | 6 ft., captive, 14 AWG, with 3-conductor Edison plug |
| Lamps: | Two 120V incandescent bulbs, 4 watts each |
| Operating Voltage: | 120VAC 60Hz |
| Spike Protection Mode: | Line to neutral |
| Energy Dissipation: | 170 joules |
| Peak Impulse Current: | 12,000 amps |
| Maximum Continuous Opterating Voltage: | 130 VAC RMS |
| Let Through Voltage (@ 125 amps, 8/20uS waveform) | 400 volts |
| Noise Attenuation: | Transverse mode: Greater than 26dB, 200Khz to 10 Mhz |
| Dimensions: | 1.75” H x 19” W x 7.5” D |
| Weight: | 5.8 lbs. |
| Warranty: | Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship. |
Documents:
(All Links open in a new window)
| ( 4.5 MB ) |
| ( 2.7 MB ) |
For over 30 years Furman has been the, hands-down leader, and most trusted brand name for AC Conditioning, AC Regulation, balanced Isolation transformers, Power Sequencing, and Power Distribution for audio, video, and broadcast professionals. Furman is used by the best studios, DJ's, clubs, professional musicians, contractors, and audio engineers across the world. They choose Furman because of reliability, quality, engineering expertise, and because Furman knows the specific needs of professionals who can't afford to have downtime or equipment failure.
We are giving away 16 rack screws so you can install this and all your other rack equipment without running around and looking for screws. These are top of the line rack screws, and they are standard sized. You do not need 16 screws to install this item, however we want you to be able to install your other rack equipment as well as the Furman conditioner!
Shipping & Returns
Row content
