SKB 1SKB19-R1406 Gig Rig 14U Top 6U Front Rack + FREE Furman Power Conditioner

Package Includes:

• (1) SKB 1SKB19-R1406 Gig Rig 14U Top 6U Front Rack
• (1) FREE Furman Power Conditioner

---

Authorized SKB Internet Retailer!

Features Of 1SKB19-R1406:

• SKB 1SKB19-R1406 Gig Rig w/ 14U Top 6U Front Rack
• Accommodates deep mixers
• Indestructible injection molded side handles
• Locking twist latches
• Includes wheel set with locking casters
• WEIGHT
• Shipping Weight: 72.00 lb / 32.66 kg
• Product Weight: 55.50 lb / 25.17 kg
• INSIDE DIMENSIONS
• Interior Width: 19.00 inch / 48.26 cm
• Interior Height: 29.50 inch / 74.93 cm
• Interior Cubic Volume: 8.43 cu ft / 0.24 cu m
• Rack Space Units Total: 26
• Rack Space Units Top: 14
• Rack Space Units Bottom: 12
• Rack Depth Rail to Rail: 26.00 inch / 66.04 cm
• Rack Depth Front Rail to Back Lid
• Exterior Cu. Volume: 11.56 cu ft / 0.33 cu m
• Color:

1SKB19-R1406
The Mighty GigRig® Rolling Rack System features a deep design (14U+) which allows for deeper analog and digital mixers (Yamaha 01V96, Allen & Heath Mix Wizard, Mackie Onyx, etc.). The deep design allows for rack gear to be mounted on the 6U front rack rails and additional rack gear mounted on optional 6U rear rack rails for a total of 12 rack units on the bottom.

The cover is designed to be used as a stand for the GigRig and places the mixer at proper mixing height when it is open and in use or the cover can be removed for a lower workstation making the new Mighty GigRig® versatile for audio and AV applications. The cover will fit over installed XLR cable connectors (top or rear mounted).

The mighty GigRig comes with locking casters. An optional wheel set for Marching Band/School applications is also available.

---

Advantages of SKB Cases:

• Lifetime SKB Warranty! No questions asked! No receipts required!For any defective products; Send back to SKB and they will replace it or repair it!
• Very light-weight!
• Advanced Engineering Giving SKB Superior Strength Compared To Any Other Cases On The Market
• Maximum Impact Resistance Protects Your Equipment Better Than Anything Else
• These Cases Can Withstand All Sorts Of Punishment
• Great Value!The Price On SKB Are Extremely Aggressive
• Detailed Information And Dimensions Of All Products

---

Video of M-8DX+16 SCREWS:

Descriptions:

Call 646-432-4971 with any questions 10:30 AM - 5:30 PM

---

A Merit Series Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Install an M-8Dx into the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load. The M-8Dx features two slide out, swiveling light fixtures to provide discreet illumination of your equipment on stages, in studios, and in other dark places. A dimmer knob lets you adjust the lamp brightness to just the right level.The M-8Dx also features a bright red, three-digit LED voltmeter that displays incoming voltage.

Applications:

Instrument Rigs
You've got a rack for your effects, preamps, tuner...You're going to plug that into the wall. One big spike and your rig is up in smoke. Furman's standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman's standard level RFI/EMI filtration, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp. Plus, dual pull-out lamps let you see your rack without turning the house lights on, while the digital voltmeter lets you monitor incoming voltage.

Recording
Can't track down where that noise is coming from. Your mix sounding flat. With Furman's standard level RFI/EMI filtration you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. You can even monitor voltage changes, as the digital meter allows you to keep an eye on the incoming line voltage. With a 15A capacity and nine total outlets, it's enough to power your whole home studio.

DJ Equipment
Bars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's standard level protection and filtration keeps the bad stuff out. The dual pull-out front panel lights also let you discreetly see your board and gear without distracting from the show on the dance floor.

Pro Audio
When you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's standard level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. It keeps your equipment safe and sounding clean, while the digital voltmeter lets you monitor incoming voltage. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.

Surge protection and why it is important:

This is the most important component you will have in your rack. The reason is because if you do not have a good surge protector that is reliable, all your equipment can easily blow out and stop working. A simple surge in voltage coming from the AC outlet can cause this to happen. Get the Furman M-8L and keep your expensive equipment protected!

Features:

Noise Filtration
AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)

Surge Protection
Spike & surge protection ensures equipment stays safe and your power stays clean

9 Total Outlets
8 rear panel outlets and 1 front panel convenience outlet

Digital Voltmeter
Digital voltmeter display incoming line voltage

15 Amp Rating
15 amp rating, with circuit breaker

"Protection OK" Indicator
Front panel indicator LED lets you know that your equipment is being protected

Wall Wart Spacing Indicator
Rear outlets have been spaced to accomodate even the bulkiest of wall warts and adapters

Front Panel Pull-out Lights
Two retractable incandescent light fixtures with dimmer control for convenient rack illumination

Warranty Information
There are 2 warranty options available on this product. We will exchange your product in-house, or you are covered under the manufacturers warranty since we are authorized Furman dealers.

Specifications:

Maximum Output Current:	15 amps
Line Cord:	6 ft., captive, 14 AWG, with 3-conductor Edison plug
Lamps:	Two 120V incandescent bulbs, 4 watts each
Operating Voltage:	120VAC 60Hz
Spike Protection Mode:	Line to neutral
Energy Dissipation:	170 joules
Peak Impulse Current:	12,000 amps
Maximum Continuous Opterating Voltage:	130 VAC RMS
Let Through Voltage (@ 125 amps, 8/20uS waveform)	400 volts
Noise Attenuation:	Transverse mode: Greater than 26dB, 200Khz to 10 Mhz
Dimensions:	1.75” H x 19” W x 7.5” D
Weight:	5.8 lbs.
Warranty:	Merit Series units are protected by a limited three year warranty covering defects in materials and workmanship.

Documents:
(All Links open in a new window)

( 4.5 MB )

( 2.7 MB )

For over 30 years Furman has been the, hands-down leader, and most trusted brand name for AC Conditioning, AC Regulation, balanced Isolation transformers, Power Sequencing, and Power Distribution for audio, video, and broadcast professionals. Furman is used by the best studios, DJ's, clubs, professional musicians, contractors, and audio engineers across the world. They choose Furman because of reliability, quality, engineering expertise, and because Furman knows the specific needs of professionals who can't afford to have downtime or equipment failure.

---

We are giving away 16 rack screws so you can install this and all your other rack equipment without running around and looking for screws. These are top of the line rack screws, and they are standard sized. You do not need 16 screws to install this item, however we want you to be able to install your other rack equipment as well as the Furman conditioner!

Row content