2) Polk Audio MM692 6x9”+MM652 6.5" Car Speakers+Amp+Wire Kit+Rockmat+Headphones

Description of RXA-F1:

Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer.

The RXA-F1 is a 4 channel high power amplifier with 1,600 Watts peak output, 800 Watts RMS output (4 x 200 @ 2 Ohms). You can also bridge the amplifier and get 2 x 400 Watts RMS @ 4 Ohms. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc.

This unit also features a high speed MOSFET power supply, studio-grade bipolar output stage transistors and ELNA brand audiophile capacitors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. High Level inputs, also referred to as Speaker Level inputs, allow you to install the amplifier into your vehicle even if you do not have any preamp outputs available. That means you can install this amplifier to your factory or aftermarket receiver. Other features include Auto-Start Smart turn-on (This function senses when there is a signal from the head unit and automatically turns on the amplifier hence no need to run a Remote Turn-On wire), a fully adjustable 12dB bass equalizer, 2 ch/ 4 ch input mode switch, mute and delay soft start technology, and a crossover band-pass control. The RXA-F1 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels.

One last point I want to make about this amplifier is efficiency. The circuitry of this amplifier is a class A/B circuitry. Class A/B is known to have amazing sound quality. Pro audio amps usually all are class A/B. Class A/B however is not known for its efficiency. To make this amplifier more efficient we simulated a class “G” amplifier. Class G is technology that switches the rail voltage depending on how much power is being used. We have similar technology built into these class A/B amplifiers which make these about 65-70% efficiency which is just amazing for a class A/B amplifier.

We are so confident that you will be extremely satisfied with this amplifier that we are giving every customer a 90 day money back guarantee. So purchase the amplifier and try it for 90 days. If you are not happy, we will call tag it and cover return shipping costs and refund you all your money back. (Amp must be complete with accessories and original box please).

Features:

• Rockville RXA-F1 1600 Watt Peak/400w Dyno-Certified RMS 4 Channel Amplifier Car Stereo Amp
• Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)
  • 260 Watts (4 x 65 Watts) at 4 ohms and 1% THD+N
  • 380 Watts (4 x 95 Watts) at 2 ohms < 1% THD
  • 2 x 200 Watts bridged @ 4 Ohms < 1% THD
• Peak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc):
  • 1600 Watts (2 x 800 @ 2 ohms or 1 x 1600 @ 4 Ohms)
• High-Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors
• Fully Adjustable 12dB Bass Equalizer
• 2-Ohm Stable Stereo
• 4-Ohm Mono Bridgeable
• 3 Channel Mixed-Mono Capable
• Mute and Delay Soft Start System
• Full IC-Controlled Protection Circuitry
• 2 CH / 4 CH Input Mode Switch
• RCA Preamp Line Output
• ELNA Brand Audiophile Capacitors
• 8 Volt Preamp Circuitry
• Status Mode LED Indicator
• Minimum THD:  < 0.05%
• Frequency Response: 10Hz - 40KHz
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
• CH3 & CH4 Low Pass 50Hz - 3KHz
• CH3 & CH4 High Pass 15Hz - 1KHz
• CH1 & CH2 High Pass 50Hz - 300Hz, 500Hz - 3Khz (x10)
• Sensitivity: 100dB @ 1w / 1m
• Damping Factor: > 200 @ 100Hz
• 60 Amp Maxi Fuse
• Dimensions: (W x H x L) 8.5" x 1.8" x 13"

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville DJ/PA speakers are backed with a full 1 Year warranty, though it is unlikely that you will need to use it.

Video of RM12-B:

Includes:

• 4 Sheets of Rockmat Sound Dampening Material (3 square feet per sheet)
• Roller for a perfect installation

The Rockville Rockmat RM12-B sound dampening material is a must have for any professional car audio install. This package includes 4 sheets that are each 3 square feet. This gives you a total of 12 square feet. This is perfect to be used as a door kit to cover all 4 of your doors. We also include everything needed for a quick and easy installation! Our Rockmat will increase how loud your car stereo plays! It also improves bass quality and eliminates those bad rattling and distortion sounds.

Installing Rockmat improves bass quality of the speaker and eliminates those bad rattling and distortion sounds.

Our Rockmat is built to the highest standards in this industry using 100% butyl rubber with a layer of heat resistant aluminum. Butyl rubber is the same material high end speakers surround material is made out of. We use the highest quality pressure-sensitive self-adhesive to make your installation quick and easy. Our model has increased flexibility for an easier and more permanent installation! Our sound dampening product uses 72mil of pure grade aluminum! Most products on the market use 50mil. Our product will absorb sound better than the competition. The other products on the market like most of the GTMAT series for example use a mixture of asphalt in their products. They basically are manufacturing roofing material and calling it sound deadener. Their product will work OK, but not nearly as good as our Rockmat. Our Rockmat is made of 100% butyl rubber and an aluminum heat resistant shield which is the same as many of the more expensive brands out there that sell for twice our price.. We only make top quality gear over here at Rockville! These are comparable to the ONYX series by GTMat. (Only we sell it for the price of their lower series!).

Our Rockmat has an adhesive temperature range of -100F to 300F (-60C to 150C). Our adhesive is top of the line! It will stick for years and years! Each layer of our material reduces unwanted noise 5-8 dB! This is among the best ratings in the industry. Our product works as well or better than other high end brands! We did our testing and research.

Installation Instructions:
Rockmat is a self-adhesive. Stick the Rockmat in your desired area. Rockmat is pressure sensitive so after you apply the material into your desired area; apply pressure to it. That is it! Installation takes only minutes! Please note our Rockmat is also easy to cut into the desired shape you need!

To prove how good our sound dampening material is we will offer a 90 day money back guarantee! If you are not happy with the performance; simply pack it up and we will send you a label and give you a complete refund when it comes back to us!

Features:

• Rockville Rockmat RM12-B 12 Sq Ft Sound Dampening/Deadening Butyl Rubber Car Kit
• Contains 4 sheets of sound damping material – Each sheet is 12" inch x 36" inch  (3 sq. ft. per sheet)
  
• Paintable Surface
  
• Recommended for use as a door kit or trunk lid kit
• Increases SPL – The use of our Rockmat will not only make your sound more clear and eliminate distortion but it will make your music louder by
  
• Eliminates sound leakage!
  
• Improves Bass Quality and Reduces Bass Distortion
  
• Kill unwanted noise, rattles, vibrations
  
• Reduce exhaust and engine noise
  
• Aluminum-coated for heat-resistance
  
• 72mil thickness
  
• Full car installation reduces unwanted noises 5-8 dB
  
• We use the highest quality high-tack self-adhesive to make your installation quick and easy!
  
• Our model has new and improved increased flexibility for an easier installation and top sound quality!
  
• Permanent installation with ability to withstand even the highest temperatures!
  
• Waterproof material! Our material is very durable. It is waterproof, heat proof and flexible
  
• Sticks to any surface
  
• Designed and engineered by Rockville USA!
  
• Manufactured with the newest state-of-the-art machinery using only the purest raw materials as well!
  
• Every product is checked during production for consistency. We have very high quality standards!
  
• We use very high quality butyl rubber which gives amazing sound insulation and shock absorption. We do not use any asphalt in our product!
  

Specifications:

• Dimensions per sheet: 12" inch Length x 36" inch Width x 0.07' sheet Depth
  
• Raw Material: 90% high absorbent butyl rubber and 10% pure-grade aluminum           
  
• High-Tack Self-adhesive
  
• Reduces unwanted noises 5-8 dB
  
• Adhesive temperature range of -100F to 300F (-60C to 150C).
  
• Material Color: Black
  
• Weight: 8.55 (Lbs.) per box
  
• Shipping weight: 9.48 LBS
  
• Shipping Dimensions: 16.34" x 14.57" x 2.36"
  

Features of roller:

• Made of high quality Wood & Steel
  
• Designed especially for use in installing sound dampening material
  
• Length: 7 in
  
• Handle Length: 5 in
  
• Roller Diameter:  1.3 in 
  
• Material Color: Black    
  
• Weight: 0.44 Lbs.

Includes:

• DJ1500 headphones
• Detachable cable
• Soft suede and leather ear cushions (interchangeable)
• Leather hard travel protective case
• Gold plated ¼” adapter

Video of DJ1500:

Description:

Rockville brings you Pro quality DJ headphones at an incredible price with its new DJ1500. These headphone