Rockville RXH-F5 Amplifier Car Stereo Amp+Wire Kits+Cable+Component Speakers

• (1) Rockville RXH-F5 3200 Watt Peak/1600w RMS 5 Channel Amplifier Car Stereo Amp
• (1) Rockville RWK4CU 4 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC
• (2) Rockville RTR172 17 Foot 2 Channel Twisted Pair RCA Cable Split Pin 100% Copper
• (1) Pair of Rockville RV65.2C 6.5" Component Car Speakers 750 Watts/140w RMS CEA Rated

Video of RXH-F5:

Over the years, the technology used to create audio amplifiers has grown by leaps and bounds. We consider it our mission to use our expertise in developing the latest technologies and to bring you the absolute best sounding amplifiers on the market at a reasonable price. From its clean, sleek design to its high quality components, you will be amazed at the quality and power that these new Phenom amps offer.

 
The RXH-F5 is a 5 channel amplifier with 3,200 Watts peak output and 550 Watts CEA-2006 rated RMS power (4 x 50 Watts + 1 x 350) at 4 ohms and 1% THD+N. Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market. The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the CEA rated RMS rating can be used to compare with brands who rate their items using the CEA standard such as Kicker, Rockford, Alpine, etc.

This is a 5 channel amplifier that is essentially 2 amplifiers built into one. There is a 4 channel class A/B amplifier and a mono class "D" amplifier all built into the same heatsink. The recommended configurations are to use the 4 full range channels to power all your interior speakers and then to use the mono channel for 1, 2, or more subwoofers.
 
One of the tricks to determine the real power of a car amplifier is to multiply the fuse rating by 10 to determine the true RMS power. This formula almost always works within 20 %. RXH-F5 features Dual 60 Amp Maxi Fuses. Compare this to other amps on the market with similar fuse ratings and you’ll see that with the RXH-F5 you are getting your money’s worth and then some. I have only seen 2 other 5 channel amplifiers with a similar fuse rating and power to this one. They both cost over $400! Our amplifier can compete with those ones in power and sound quality!
 
This unit also features a high speed MOSFET power supply, studio-grade bipolar output stage transistors and ELNA brand audiophile capacitors. It has a fully adjustable 12dB/Octave cross over with differential circuitry. High Level inputs, also referred to as Speaker Level inputs, allow you to install the amplifier into your vehicle even if you do not have any preamp outputs available. That means you can install this amplifier to your factory or aftermarket receiver. Other features include Auto-Start Smart turn-on (This function senses when there is a signal from the head unit and automatically turns on the amplifier hence no need to run a Remote Turn-On wire), a fully adjustable 12dB bass equalizer, mute and delay soft start technology, and a crossover band-pass control. The RXH-F5 is protected by a full IC controlled circuit and has professional peak limiter circuitry guaranteeing distortion free musical playback at all levels.

One last point I want to make about this amplifier is efficiency. The circuitry of the 4 channel part of the amplifier is a class A/B circuitry. Class A/B is known to have amazing sound quality. Pro audio amps usually all are class A/B. Class A/B however is not known for its efficiency. To make this amplifier more efficient we simulated a class “G” amplifier. Class G is technology that switches the rail voltage depending on how much power is being used. We have similar technology built into these class A/B amplifiers which make these about 65-70% efficiency which is just amazing for a class A/B amplifier. The class "D" channel for the subs is even more efficient than the class A/B channels which is typical. Class "D" is known for its' efficiency. All in all you get the best of both worlds with this amp! You get a rock solid powerful bass amplifier along with an efficient, powerful, and smooth sounding 4 channel class A/B amplifier all packed into a compact and beautifully designed heatsink!
 
We are so confident that you will be extremely satisfied with this amplifier that we are giving every customer a 90 day money back guarantee. So purchase the amplifier and try it for 90 days. If you are not happy, we will call tag it and cover return shipping costs and refund you all your money back. (Amp must be complete with accessories and original box please).

Features:

• Rockville RXH-F5 3200 Watt Peak/1600w RMS 5 Channel Car Stereo Amplifier 
• CEA Compliant Power Ratings:
  • 4 Ohms: 550 Watts (4 x 50 Watts + 1 x 350) at 4 ohms and 1% THD+N
  • 2 Ohms: 800 Watts (4 x 75 Watts + 1 x 500) at 2 ohms and 1% THD+N
    
• RMS Power Ratings  
  • 4 Ohms: 1100 Watts (4 x 100 watts + 1 x 700 Watts)
  • 2 Ohms: 1600 Watts (4 x 150 watts + 1 x 1,000 Watts)
• Channels 1 through 4 are class A/B and channel 5 is mono class "D"
• High-Speed MOSFET Power Supply
• Studio-Grade Bipolar Output Stage Transistors 
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
• CH3 & CH4 Low Pass 500Hz - 3KHz
• CH5 Low Pass 50Hz - 250Hz
• CH3 & CH4 High Pass 50Hz - 1KHz
  
• High Level Input Auto Start Smart Turn-On
  
• Full IC-Controlled Protection Circuitry
  
• Remote Dashboard Subwoofer Control
• Fully Adjustable Bass Equalization Control
  
• 2 Ohm Stable Stereo
  
• 4 Ohm Mono Bridgeable
  
• 3 Channel Mixed-Mono Capable
  
• Channel 5 - 2 Ohm Mono Capable
  
• 2 CH / 4 CH / 5 CH Input Mode Selector
  
• Fully Adjustable Subsonic Filter: 15 - 50Hz
  
• Crossover Bandpass Control
  
• Subwoofer Phase Control
  
• Mute and Delay Soft Start System
• 8 Volt Preamp Circuitry
• ELNA Brand Audiophile Quality Capacitors
  
• Status Mode LED Indicator
• Minimum THD at Rated Power: < 0.05%
• S / N Ratio: > 100dB
  
• Frequency Response: 10Hz - 40KHz
• Damping Factor: > 200 @ 100Hz
• Dual 60 Amp Maxi Fuse
• Dimensions: (W x H x L) 8.5" x 1.8" x 16.1" 
  

Description of RTR172:

RCA cables are the backbone of your audio system. They are used for transferring audio and video signals. Without a proper cable and good signal, you can have a distortion, which would hold your system back from performing at its optimal capabilities. Don't ever settle for cheap RCA's because they will not provide a clean signal to your amplifiers or video sources.

These Rockville RCA cables are 100 % copper, and feature advanced technologies like triple shielding, magnetic interference rejection, woven outer shield, and more. The best way to ensure that you’ll have a good setup is to invest in good cables.

Features:

• Rockville RTR172 17 Foot 100% Copper 2-Channel Twisted Pair RCA Cable
• Oxygen Free Copper
• 100% Oxygen Free Copper
• Premium Audiophile RCA Interconnect Cables
• Split Pin Technology Ensures a Secure Connection
• Outstanding Noise Rejection, Accuracy, and Frequency Response
• Color Coded Channel Identification
• Length: 17-Foot
• Rockville 1 year warranty
• Also Available in: 3-Foot, 6-Foot, 12-Foot, 20-Foot and 25-Foot

About Rockville Quality Control Procedures:

The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a hassle free warranty.

Video of RV65.2C:

Includes:

• (2) 6.5” speakers
• (2) tweeters
• (2) Crossovers
• (2) Grills
• Flush and surface Mounting accessories
• Speaker wire

Rockville car audio speakers utilize the latest in speaker technology for superior sound quality. We use top quality polypropylene cones which are known for their high damping qualities. This means they can have a controlled break-up, which results in a smoother high frequency roll-off. Our  Flexmotion Butyl Rubber Surrounds give the speakers a smooth response with minimal distortion. For smooth and extended high frequency sounds we used high temperature PEI dome tweeters with ferrite magnets.  The RV series speakers are designed with superior SPL response and extremely high power handling making these perfect for use with the amp built into your receiver or with a high powered external amplifier. Due to their shallow mount design, these speakers fit in 97% of all vehicles.

CEA Rated.
Rockville car audio speakers are CEA rated, what that means is that the Consumer Electronics Association recognizes these speakers to be accurately rated and meet their rigorous standards for wattage, SPL and frequency response. So while other manufacturers state “out-of-this-world” wattages on their products, you can rest assured that your Rockville speaker will work up to spec. and exceed your expectations.

Top of the line components!
Rockville speakers only use the best sourced components. We use efficient and high powered magnets along with aluminum voice coils wound with 100 % oxygen free copper. We pay attention to every detail ensuring you get the best sound in your car.

Features:

• Rockville RV65.2C 6.5"/6" Component car speakers (pair)
• Peak Power Rating: 750 Watts per Pair / 375 Watts Each
• CEA Compliant RMS Rating: 140 Watts per Pair / 70 Watts Each
• Injection Molded Polypropylene woofer cone gives amazing bass and mids
• Flex Motion Butyl Rubber Surround
• 1.2” PEI dome tweeter with ferrite magnet give amazing highs
• Flush and surface mounting tweeter options
• Fine-tuned 2-Way Crossover, 12db/Octave Roll Off
• Ferro Fluid Cooled Tweeter Magnet
• Steel high quality basket
• Rubber magnet boot cover
• Frequency response: 34-22,000 Hz
• Crossover will cut anything lower than 3.5 Khz @ 12 dB / octave slope from the tweeters
• Crossover will cut anything higher than 3.5 Khz @ 12 dB / octave slope from the woofers
• Sensitivity: 91 dB @ 1w/1m
• Mount depth: 2.17"
• Impedance: 4 Ohm
• Grilles included
• Aluminum voice coils
• 100% oxygen free copper voice coil windings
• Black electro-plated T-yoke and washers
• Cotton spider material
• Copper terminals
• Cutout diameter: 4.92”
• Magnet: 8 Oz Y25 magnet
• Magnet dimensions: 80mm x 12mm
• Fs: 95.37 hz
• Re: 3.6 OHM
• Qes: 1.494
• Qts: 0.864
• Qms: 2.049
• Fits 6” and 6.5” openings
• Top mounting depth of woofer: 2.17” Inch (95% of installs use the top mounting depth)
• Bottom mounting depth of woofer: 2.6” inch (This measures the speaker from top to bottom)
• Top mounting depth of tweeter: 0.79”
• Bottom mounting depth of tweeter: 1.18”
• Tweeter mounting diameter: 1.93”

Video of RWK4CU:

We challenge anyone to put this wire to a resistance test against any other wire on the market with the same gauge. If our cable does not meet or exceed any other cable, even if it costs 3 times more, we will be happy to call tag the item and refund you in full. Why are we so confident ? This cable is 100% copper. You cant have a cable with more than 100 % copper. So the only way a cable would out-perform this one is if it were being advertised as a 4 AWG but they are giving you more wire than advertised. No brands selling 100 % copper cables actually do this.

We guarantee that this kit will compete with the most expensive amp kits on the market from Kicker, JL Audio, or any other top brands.

Maximum Power!
Looking for a wire kit that has 100% true specifications! A wire kit that uses 100% copper 4-gauge cable! Then look no further than the Rockville True-Spec RWK4-CU 4 Gauge Amplifier Wiring Installation Kit. This package includes everything you'll need to get your amplifier system powered-up correctly and at peak efficiency. All items included in this kit are top of the line.

The power and ground cables aptly named “Mega Power Cable” is a no compromise power cable. Rockville’s engineering team over-built and designed the cables using thousands of strands of only true 100% oxygen-free, silver-tinned copper strands. The use of a proprietary special twisting process reduces “surface skin impedance loss” so that Mega Power cables have zero signal and power loss, delivering full power from your battery system to your amplifier even at lengths of 20 feet! The increased current flow and higher amperage carrying capacity will increase your amplifiers efficiency and keep your amplifier running cooler. The SuperFlex outer insulating jacket jacket makes installation and cable routing simple and easy. The 100% copper stranded wire is extremely tolerant of the hostile conditions found under the hood in vehicles and compensates for vibration, heat expansion and flexibility. This flexible and well-shielded wire is crucial for getting through all of the nooks and passageways within the confines of a vehicle interior.

Some manufactures use all aluminum or mix a little copper with aluminum to give their cables the appearance of a “heavy-duty” cable. But not Rockville, our True-Spec 100% oxygen free, silver tinned copper eliminates corrosion, increases current transfer x 10, and won’t discolor over time.

The superior quality and materials of the Rockville 100% True-Spec amplifier installation kit is realized in the included accessories and cable workmanship. Included is a precision CNC cut full size ANL fuse housing, machined from solid brass and then 14K gold plated for superior signal transfer and complete with a matching gold plated 120-amp ANL fuse. The power cable is wrapped in 6 feet of durable nylon braided tubing to protect it from heat and chafing in the engine compartment. All installation accessories such as the ring terminals and spade connectors are nickel plated for superior signal transfer and durability.

CRYSTAL SQ AUDIO PLANAR SPEAKER CABLE
The speaker cable included in the Rockville True-Spec is also manufactured from 100% copper and woven in to a flat planner design and coated in our Super-Flex insulation so that it fits under and around your vehicles trim and carpet smoothly and without bulking up. With crystal clear sound quality these speaker cables deliver true audio fidelity from your car audio amplifier to your speakers. The 14-gauge speaker cable included in the 4-gauge kit can handle over 2000 watts of power without heating up or degrading signal quality.

CRYSTAL SQ RCA AUDIO INTERCONNECT CABLE
Designed and engineered to be the best sounding, best performing and best looking RCA cables available today. Each channel in the RCA cable is triple shielded first with dielectric internal insulators and then with a 98% coverage woven shield. All cables are manufactured of 100% oxygen free copper and feature twisted pair technology for superior noise rejection and pure sonic signal flow. The RCA plugs are shielded metal and feature a spiral cut outer ground ring with center split pin for precise and tight audio connections. The result of all this technology is noise free-noise rejection signal transfer for optimum sound quality. You will hear the difference these RCA signal transfer cables will make.

• Rockville RWK4CU 4 Gauge 2 Channel Complete Car Amplifier Installation Kit 100% Pure Copper RCA Cables
  
• 4 Gauge Power Amplifier Installation Kit
• Designed specifically for car audio systems over 1000 watts RMS to 2000 Watts
• Made from silver-tinned 100% virgin copper for a pure uninterrupted transfer of power and signal
• The solid brass gold plated Mini ANL Fuse Holder offers ideal protection for high powered systems
• Strand Count: 1862
• BC-5W2 Compliant

• 17 ft. Frosted Blue 4 gauge power wire with seamless crimp ring terminal
• 3 ft. Frosted Gray 4 gauge ground wire
• 17 ft. Blue 18 gauge remote lead wire
• 25 ft. Frosted Clear/Blue 14 gauge flat speaker wire
• 17 ft. Triple shielded twisted pair RCA cables
• One Mini ANL Fuse Holder with 120 amp ANL fuse
• One 1/2“ black rubber firewall grommet
• One 4 gauge spade terminal
• Two black 12 gauge nickel-plated spade lugs
• Three blue 12 gauge nickel-plated spade lugs
• One black 4 gauge ring terminal
• Ten 6” black zip ties

Row content