(2) Rockville 12" Subwoofers+Enclosure Box For 2007-2016 Jeep Wrangler 4-Door
Product Description
- (2) Rockville W12K6D4 V2 12" 2400w Car Audio Subwoofer Dual 4-Ohm Sub CEA Compliant
- (1) Rockville (2) 12" Subwoofer Sub Enclosure Box For 2007-2016 Jeep Wrangler 4-Door
- (1) Dual Sub Box Enclosure Installation Kit: Speaker Wire, Screws, Spade Terminals
Video of W12K6D4 V2:
Features:
- Rockville W12K6D4 V2 K6 Series 12" Dual 4-Ohm Car Subwoofer
- Peak Power Handling: 2400 Watts
- Program Power Handling: 1200 Watts
- CEA Rated RMS Power Handling: 600 Watts
- 2.5" Voice coils (Black Aluminum Former Wound with 100% OFC Copper Wire
- The wire we use is made in the USA! It is one of the most important components to make the sub high quality and last longer
- Double Stacked 100 Oz High Quality Magnet
- Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient
- Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone
- Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
- Red Stitching Cone Reinforcement Ensures Long Life
- Polypropylene (PP) Dustcap
- Two Chrome-Plated Binding Post Terminals - These are the best terminals on the market and they accept any gauge wire
- Impedance: Dual 4-Ohm Voice Coils
- Vented Hole on T-yoke Enhances Heat Dissipation
- Special Custom Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet
- Custom Rockville Mounting Gasket Looks Beautiful and Makes it Easy To Mount the Subwoofer Air-Tight
- High BL Magnetic Motor Gap
- We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated
- Cutout Diameter: 11.125” inches
- Mounting Depth: 5.75” inches
- Frequency Response: 27 Hz - 1.5K kHz
- 8mm T-Yoke + 8mm Washer
- Sensitivity: 85dB
- Sealed Enclosure Volume: 1.0 - 1.5 Cubic Feet
- Vented/Ported Enclosure Volume: 1.65 - 2.5 Cubic Feet
- Weight: 17.64 Lbs.
- Shipping Weight: 22.05 Lbs.
- Shipping Box Dimensions: 15.75" x 15.75" x 13.6" Inches
- XMAX:22 MM (One way)
Detailed Info:
- Body: Non-Pressed Paper
- Gap Plate Inside Diameter: 80mm (3.14 inches)
- Gap Plate Outside Diameter: 156mm (6.14 inches)
- Gap Plate Thickness: 20mm (0.8 inches)
- Yoke Outside Diameter: 145mm (5.71 inches)
- Yoke Thickness: 8mm (0.31 inches)
- Yoke Pole Diameter: 60mm (2.4 inches)
TS Parameters:
TS Parameter | Wired in Series | Wired in Parallel | Description of Measurement |
Electrical Parameters |
|||
Re |
8.58 Ohm |
2.14 Ohm |
Electrical voice coil resistance at DC |
Le |
6.549 mH |
1.646 mH |
Frequency independent part of voice coil inductance |
L2 |
9.015 mH |
2.289 mH |
Para-inductance of voice coil |
R2 |
14.79 Ohm |
3.72 Ohm |
Electrical resistance due to eddy current losses |
Cmes |
451.49 µF |
1832.58 µF |
Electrical capacitance representing moving mass |
Lces |
35.18 mH |
8.68 mH |
Electrical inductance representing drive compliance |
Res |
56.58 Ohm |
14.09 Ohm |
Resistance due to mechanical losses |
fs |
39.9 Hz |
39.9 Hz |
Drive resonance frequency |
Mechanical Parameters (Using Laser) |
|||
Mms |
219.823 g |
219.582 g |
Mechanical mass of drive diaphragm assembly including air load and voice coil |
Mmd (Sd) |
206.885 g |
206.644 g |
Mechanical mass of voice coil and diaphragm without air load |
Rms |
8.605 kg/s |
8.505 kg/s |
Mechanical resistance of total-drive losses |
Cms |
0.072 mm/N |
0.072 mm/N |
Mechanical compliance of drive suspension |
Kms |
13.84 N/mm |
13.81 N/mm |
Mechanical stiffness of driver suspension |
Bl |
22.065 N/A |
10.946 N/A |
Force factor (Bl product) |
Lambda s |
-0.013 |
0 |
Suspension creep factor |
Loss Factors |
|||
Qtp |
0.873 |
0.885 |
Total Q-factor consider all losses |
Qms |
6.41 |
6.475 |
Mechanical Q-factor of of drive in free air considering Rms only |
Qes |
0.972 |
0.985 |
Electrical Q-factor of drive in free air considering Re only |
Qts |
0.844 |
0.855 |
Total Q-factor considering Re and Rms only |
Other Parameters |
|||
Vas |
26.3903 l |
26.4413 l |
Equivalent air volume of suspension |
n0 |
0.166% |
0.164% |
Reference efficiency (2 pi-radiation using Re) |
Lm |
84.4 dB |
84.35 dB |
Characteristic sound pressure level (SPL at 1m for 1W @ Re) |
Lnom |
84.1 dB |
84.05 dB |
Nominal sensitivity (SPL at 1m for 1W @ Zn) |
Sd |
508 cm² |
508 cm² |
Diaphragm area |
EBP |
41.0 |
40.5 |
Efficiency bandwidth product |
Features:
- 1" MDF Face, 3/4" for the rest
- Gold Tipped Spring Loaded Terminals
- Premium Charcoal Colored Carpet
Specification:
- Air Space: 1.6 Cubic Feet (per sub)
- Mounting Depth: 12"
- Height: 13.25"
- Width: 36"
- Depth: 16.25"
- Tuning Frequency: 39 HZ
Complete Dual Subwoofer Enclosure Installation Kit!
Includes:
- 20 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 20 Feet of 14 AWG Blue Speaker Wire
- 4 Spade Terminals
This accessory package includes everything you need to install two subwoofers into an enclosure, and wire your enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
Shipping & Returns
Row content