Kicker 43CVT102 COMPVT 10" 800 Watt Car Subwoofer + Sealed Sub Box Enclosure
Product Description
Package Includes:
- (1) Kicker 10" Car Audio Subwoofer
- (1) Rockville Single 10” 0.75 cu.ft. Sealed Car Sub Enclosure Box
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
Authorized Kicker Dealer!
Description for Kicker Sub:
Slimline:
A specially made motor and reinforced cone make the CompVT a perfect choice for big bass without a big box.
Recess Time:
The included Clearance Plate allows the CompVT to sit in a recess made in the back of the enclosure. Now you can make a thin box even thinner!
Beat the Heat:
With full perimeter venting and UniPlate™ black plate and pole piece, you have outstanding thermal management in an ultra-thin sub.
10" CompVT 2 Ohm:
- The CompVT 10-Inch Subwoofer is a 2O slimline driver.
- Precise KICKER engineering allows the CompVT to pound with limited space. A special four-layer voice coil provides the ability to work with serious amounts of power without the bulk of a standard subwoofer.
- The CompVT 10-Inch Subwoofer works best with a sealed or ported enclosure and 400 watts of recommended power.
Features/Specifications:
- Kicker 43CVT102 10" 800 Watt Single Voice Coil 2-Ohm Car Audio Subwoofer
- Power Handling :
- Peak : 800 watts
- RMS : 400 watts
- Size : 10"
- Shallow-mount subwoofer with true high-performance
- This sub is slim enough to be mounted in virtually any vehicle
- Delivers extreme bass with minimum depth
- Four-layer voice coil for max power handling
- Dark gray modified-spoke cone with bracing for clear bass response
- Ventless solid-pole design for direct mount to enclosure rear wall
- Steel “clearance” adapter plate replaces part of enclosure wall depth to further lessen depth
- Injection molded SoloKon cone
- Ribbed Santoprene surround
- High-temp coil wire
- Slender, strong steel basket with coil-cooling perimeter venting
- Durable Spiralead tinsel leads
- Stitched surround for enhanced cone-to-surround strength
- Tough double-stitched surround
- Special spring-loaded binding posts for minimizing depth
- UniPlate™ system redirects heat away from motor structure
- Stamped Steel Basket
- Push Pin Terminals
- Top-mount depth : 4-1/4"
- Cutout diameter : 9-3/16"
- Frequency Response : 25 - 500Hz
- Sensitivity : 87.2 dB
- Minimum Sealed Enclosure : 0.8 cu. ft.
- Maximum Sealed Enclosure : 3 cu. ft.
- Minimum Ported Enclosure : 1.25 cu. ft.
- Maximum Ported Enclosure : 1.75 cu. ft.
- Subwoofer Design : Round / Circle
Description of RS10:
The RS10 single sealed speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!
MADE IN THE USA WITH PRIDE!
Features:
- Rockville RS10 Single 10" Sealed Subwoofer Enclosure
- Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
- 3/4" USA Heavy Duty MDF Construction
- Machine precision cut mounting holes
- Top of the line Glue for extra durable adhesion
- High quality GOLD spring loaded terminals
- Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.
Enclosure Measurements:
- Type of Enclosure: Sealed
- Enclosure Sub Size: Single 10"
- Dimensions in Inches: 16" L x 13.25" W x 13.25 H"
- Top and Bottom Depth: 10.5"
- Mounting Depth: up to 9" (enough depth for any sub on the market)
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 1.0 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 0.75 Cubic Feet
About Rockville Quality Control Procedures:
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville sub enclosures are backed with a full 90 day warranty, though it is unlikely that you will need to use it.Complete Single Subwoofer Enclosure Installation Kit!
Includes:
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
Shipping & Returns
Row content
