2) Rockville DESTROYER 15D1 15" Competition Car Audio Subwoofers USA Voice Coils

$1,198.00 $644.90 Save 46%
Shipping calculated at checkout.
Product Description
Video of DESTROYER SUBS:

Features:

  • Rockville DESTROYER 15D1 15" Dual 1-Ohm Car Subwoofer
  • Peak Power Handling: 8000 Watts
  • Program Power Handling: 4000 Watts   
  • CEA Rated RMS Power Handling: 2000 Watts 
  • Voice Coils are made in the USA! 3” 4-Layer Black Aluminum Voice Coils Wound with Aluminum Wire
  • USA Voice Coils are hands down The Best in the world
  • The voice coils are rated to withstand high temperatures of 300-350C,
  • Triple-Stacked 300 Oz Y35 Magnets. (Y35 is the best grade and they will perform better than most 400 oz magnets)
  • 1-Piece Chrome T-Yoke with Stamped Logo (1 piece t-yokes magnetize better and makes excursion (xmax) better as well as increases the BL rating. BL is basically how much power you get out of the motor and is one of the most important ratings 
  • We use the highest grade black glue that handles extremely high temperatures which allows our woofer to handle even more power than they are rated
  • Cast Aluminum Basket With Black Sanded Finish Makes This Sub Very Efficient And Lighter Weight
  • Large 8 Gauge Chrome-Plated Binding Post Terminals (These are the best terminals on the market and they won't oxidize)
  • Black Non-Pressed Paper Cone
  • Our cones are ultra-stiff. They are thicker and stronger than other subs on the market making our subs able to handle more power than the competition
  • Extra Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
  • Silver Stitching Cone Reinforces the Cone and Ensures Long Life
  • Shiny Paper Dustcap (Paper is the best material and can withstand even higher temperatures than polypropylene dustcaps
  • Impedance: Dual 1-Ohm Voice Coils
  • Special Custom Rubber Boot Magnet Covers Make the Woofer Look Nice and Protects the Magnet
  • Rubber Mounting Gasket Makes it Easy To Mount the Subwoofer Air-Tight
  • High BL Magnetic Motor Gap
  • Nomex Spider is resistant to tearing and has the best long-term reliability over regular cotton and poly cotton spiders   
  • Cutout Diameter: 14.76” inches
  • Mounting Depth: 9.76” inches
  • Frequency Response: 33 Hz -1.5 K kHz
  • 25mm T-Yoke + 15mm Washer
  • Recone kits available at reasonable prices
  • Sensitivity:  88.4 dB
  • Sealed Enclosure Volume: 2.02-2.47 Cubic Feet
    Vented/Ported Enclosure Volume: 3.16 - 4.41 Cubic Feet
  • Weight: 52.92 Lbs.
  • Shipping Weight: 56.23 Lbs.
  • Shipping Box Dimensions: 18.9" x 18.9" x 15.35" Inches
  • XMAX: 35 MM

TS Parameters:??

Parameter

Wired in Series

Description of Measurement

Electrical Parameters

Re

1.7 Ohm

Electrical voice coil resistance at DC

Fo

35.896 Hz

Drive resonance frequency

Mechanical Parameters (Using Laser)

Mms

318.205 g

Mechanical mass of drive diaphragm assembly including air load and voice coil

Mmd (Sd)

305.695g

Mechanical mass of voice coil and diaphragm without air load

Cms

61.781 mm/N

Mechanical compliance of drive suspension

Bl

14.898 N/A

Force factor (Bl product)

Loss Factors

Qms

3.916

Mechanical Q-factor of of drive in free air considering Rms only

Qes

0.550

Electrical Q-factor of drive in free air considering Re only

Qts

0.482

Total Q-factor considering Re and Rms only

Other Parameters

Vas

53.280

Equivalent air volume of suspension

n0

0.433%

Reference efficiency (2 pi-radiation using Re)

Sd

77.931cm²

Diaphragm area

SPL

88.4dB

sensitivity

 Detailed Info:

  • Body: Non-Pressed Paper Cone
  • Gap Plate Inside Diameter: 85.5mm (3.37 inches)
  • Gap Plate Outside Diameter: 210mm (8.27 inches)
  • Gap Plate Thickness: 15mm (0.59 inch)
  • Yoke Outside Diameter:210mm (8.27 inches)
  • Yoke Thickness: 25mm (0.98 inches)
  • Yoke Pole Diameter: 73.9mm (2.91 inches)
Shipping & Returns

Row content