Memphis Audio SRX1040 10" 400 Watt SRX 4 Ohm Car Subwoofer+Amplifier+Amp Kit
Product Description
- (1) Memphis Audio SRX1040 10" SRX Car Subwoofer Audio Sub 400w Peak / 200w RMS 4 Ohm
- (1) New Rockville RXA-T1 1500 Watt Peak/375w RMS 2 Channel Amplifier Car Stereo Amp
- (1) Rockville RWK81 8 Gauge Complete Amp Installation Wire Kit with 100 % Copper RCA
Description of SRX1040:
Whether it’s your first system or you just need a little more bass in your trunk, the Street Reference line is the ultimate value subwoofer on the market. Redesigned from the ground up, SR subs are indistinguishable from their predecessors with improved performance, durability and cosmetics.
Features:
- Memphis Audio SRX1040 10" SRX Car Subwoofer Audio Sub 400w Peak / 200w RMS 4 Ohm
- 12 AWG compression terminals
- Anodized aluminum voice coil former
- Optimized for both sealed and vented enclosures
- Lightweight but rigid cone design for improved efficiency
- Polypropylene cone for improved durability
- Progressive poly cotton spider for controlled motion resulting in lower distortion
- Rubber surround for improved durability
Specifications:
- Size: 10"
- RMS Power: 200w
- Peak Power: 400w
- Voice Coil: Single
- Impedance: 4-Ohm
- Sensitivity (dB): 84
- Magnet Size (Oz): 30
- Mounting Depth (in): 4.65
- Cut Out Diameter (in): 9.06
- Voice Coil Diameter: 2"
- Warranty: 1
TS Parameters:
| THIELE SMALL PARAMETERS | |
| Resonant Frequency (fs) | 36 Hz |
| Mechanical Q | 4.75 Qms |
| Electrical Q | 0.88 Qes |
| Total Q | 0.742 Qts |
| Sensitivity | 84.8 dB |
| Xmax Linear | 0.24 in. |
| Xmax Mechanical | 0.8 in. |
| Displacement | 0.07 cf. |
| Air volume of suspension (Vas) | 1.08 cf. |
| Moving Mass (Mms) | 120.6 g |
| Suspension Compliance (Cms) | 0.165 mmN |
| Effective piston area (Sd) | 363.03 SqCm |
| Motor Strength (Bl) | 9.94 TM |
| VOICE COIL & MAGNET | |
| Impedance Series | 4 ohms |
| Impedance parallel | 4 ohms |
| Voice coil diameter | 2 in. |
| RMS Power | 200 Watts |
| Peak Power | 400 Watts |
| Magnet weight | 30 oz |
| Magnet diameter | 3.55 in. |
| PHYSICAL DIMENSIONS | |
| Mounting depth | 4.57 in. |
| Cutout Diameter | 9.06 in. |
| Frame Outside Diameter | 10.12 in. |
| ENCLOSURE RECOMMENDATIONS | |
| Single sub sealed | 1 cf. |
| Dual subs Sealed | 2 cf. |
| Single sub vented | 1.8 GROSS cf. |
| Port dimensions | 10.5" x 1.5" x 14.5"L |
| Tuning frequency | 38 Hz |
| Dual sub vented | 3.5 GROSS cf. |
| Port dimensions | 10.5" x 3" x 15"L |
| Tuning frequency | 38 Hz |
Video of RWK81:
Description:
The Rockville RWK81 8 AWG (American Wire Gauge) amp kit has the following diferences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 8 gauge, but cheat you on the thickness. We are honest about the thickness.
4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.
This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.
Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!
One other last thing worth noting about our kit compared to others. Our kit cosmetically looks the best. It has blue power wire, clear ground wire, and twisted pair RCAs with matching colors. This model in
Shipping & Returns
Row content
