MTX 5515-44 15" 800 Watt DVC 4-ohm Car Audio Subwoofer+Vented Sub Box Enclosure
Product Description
Package Includes:
- (1) MTX 15" Subwoofer Sub
- (1) Rockville 15" Vented Car Audio Subwoofer Box 2.6 Cubic Ft. Sub Enclosure
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
Authorized MTX Audio Dealer!
Description:
High SPL Subwoofers
55 Series Subwoofers are high SPL subwoofers that deliver the most bass for
your buck. Implementing many of the same features found on our 75 & 95 Series
SuperWoofers, the 55 Series can rock hard and loud for extended periods of time,
while maintaining accurate and clean bass throughout the party. You will be
impressed.
The 5515-44
The 5515-44 is a 15? dual voice coil, 400 watt, 4 ohm subwoofer built on the
MTX tradition of getting more than expected. The 55 Series subs are often used
in applications where bass levels are the most important factor. These
subwoofers are designed to move air and go boom! They are true monsters of bass
and are a great choice for anyone that really wants to be heard.
55 Series Spider Plateau Venting
This subwoofer also incorporates Spider Plateau Venting which is a
mechanical cooling process that targets cool air at the voice coil and a radial
ribbed t-yoke that acts as a heat sink effectively managing the subwoofer
temperature for long term rocking performance.
The MTX Inverted Apex Surround
This subwoofer features the MTX Inverted Apex Surround. This is a departure
from a traditional half roll surround. The Inverted Apex is narrower thereby
increasing the surface diameter of the subwoofer cone enabling it to displace
more air and generate higher SPL. The 55's are designed with a progressive
suspension that lowers distortion resulting in improved sound quality even at
high volume.
Features:
- MTX 5515-44 15" 800 Watt Peak/400 Watt RMS 4-Ohm Car Subwoofer
- RMS Power Handling: 400 Watts
- Peak Power Handling: 800 Watts
- Recommended Amp Power: 200-400 Watts RMS
- Impedance: Dual 4 Ohms
- Frequency Response: 19Hz - 130Hz
- Sensitivity: 85.4 dB
- Voice Coil: 2" inches (Dual)
- Magnet Weight: 49 oz.
- Mounting Depth: 8.0" inches
- Cut Out Diameter: 13.875"
- Volume Displacement: 85.43 cu in
- Sealed Enclosure Net Volume: 1.5 cu ft.
- Vented Enclosure Net Volume: 2.48 cu ft.
- Inverted Apex Surround: Increases Surface Area Resulting in Increased Volume Displacement and SPL
- Spider Plateau Venting: Targets Cool Air at Voice Coil for Improved Thermal Performance
- Progressive Suspension: Controls Excursion at High Power Reducing Distortion Resulting in Better Sound Quality
- Radial Ribbed T-Yoke: Helps Dissipates Heat and Decreases Distortion Improving Sound Quality
The RSV15 is a single 15" vented subwoofer box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!
MADE IN THE USA WITH PRIDE!
Features:
- Rockville RSV15 Single 15" 2.6 cu. ft. 3/4" MDF Vented Subwoofer Enclosure Box
- Machine precision cut mounting holes
- ¾” USA Heavy Duty MDF Construction
- Top of the line Glue for extra durable adhesion
- High quality GOLD spring loaded terminals
- Designed, tested, and engineered to work perfectly with high powered subs
- Designed to give the best sound quality
- Tuning frequency: 32Hz
Enclosure Measurements:
- Type of Enclosure: Ported/Vented
- Enclosure Sub Size: Single 15"
- Dimensions in Inches: 21" x 18" x 16.25"
- Top and Bottom Depth: 16.25"
- Mounting Depth: up to 15" (enough depth for any shallow sub on the market)
- Gross Volume Per Sub (Measurement for the outer dimensions of the box): 3.5 Cubic Feet
- Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 2.6 Cubic Feet
The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville sub enclosures are backed with a full 90 day warranty, though it is unlikely that you will need to use it.
Complete Single Subwoofer Enclosure Installation Kit!
Includes:
- 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
- 12 Feet of 14 AWG Blue Speaker Wire
- 2 Spade Terminals
This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.
The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.
Shipping & Returns
Row content
