Autotek 6x9" Door Factory Speaker Replacement For 1994-2002 Dodge Ram 2500/3500

• (1) Pair Autotek ATS693 6x9" 800 Watt 3-Way Car Audio ATS Series Coaxial Speakers
• (1) Metra 72-1002 Speaker Harness Connector for 1984-02 Jeep+Dodge+Cherokee Vehicles

 Authorized Auto Tek Dealer!

Features of ATS693:

• Pair Autotek ATS693 6x9" 800 Watt 3-Way Car Coaxial Speakers
• RMS Power Handling: 200 Watts
• Peak Power Handling: 400 Watts
• Speaker Impedance: 4 Ohms
• Speaker Type: Full-Range Speaker
• Frequency Response: +/- 3db: 46hz-20khz
• Sensitivity (1 Watt/1 Meter): 88db
• Crossover Point: 1k Hz + 3k
• Crossover Slope: 12db
• Mounting Diameter/Cut Out: 8.64 X 5.98
• Outside Diameter: 10.35 X 7.20
• Mounting Depth/Chassis Depth: 3.35
• Product Dimensions: 14.25 X 11.75 X 5.5 In
• Product Weight 6.15 Lbs
• Tweeter Dome Material: Neo-Mylar Soft Dome Tweeter, Impact Resistant Tweeter Elements
• Surround: UV Resistant Rubber Surround Moisture Resistant Rubber Surround With High Mid-Bass Impact
• Cone: Silver Alpha-Cellulose Polypropylene Cones - Treated Pressed Paper Cone. Produces Musical Midrange And Bass Tones While Remaining Light Weight
• Surround / Cone Coupling: High Temperature Adhesive. The Cone/Surround Connection Utilizes A High Temp Adhesive Which Assure The Cone And Surround Do Not Separate In High Power Uses Or Extremes Of Weather
• Gasket: Textured Abs Assures A Ridged Linear Seal To The Mounting Surface
• Tinsel Leads: Braided Highly Conductive While Remain Flexible During High Power Applications
• Voice Coil: Pure Copper Creates Strong Magnetic Field With A Very Thin Extrusion
• Voice Coil Former: Kapton, Lightweight And Efficiently Dissipates Heat
• Spider: Epoxy Infused Natural Fiber Allows Flexibility While The Epoxy Which Gives Strength During The Manufacturing Process
• Cooling System: Over-Coil, Air Is Exchanged Over The Voice Coil Through The Spider
• Crossover Type: Passive Butterworth, Smooth Transition Of Frequencies From Midrange/Midbass To The Tweeter Element
• Crossover Special: 6db Internal Integrated Into The Design To Assure Smooth Midrange To Tweeter Frequency Transitions
• Frame: Anti-Resonant Stamped Steel Frame. Very Strong With Minimal Harmonics Or Distortions From Flex Or Ringing
• Motor: Ferrite Magnet Creates A Strong Magnetic Field While Remaining Small Enough To Fit Nearly Every Application
• Connectors: Use Spade Connectors Or Solder Direct For The Best Connection
• Grills: Protects The Speaker From Accidental Damage. Not Used If Speaker Is Mounted Behind Vehicle Panel
• Tweeter Material: Neo-Mylar Soft Dome Great Sound Quality And Increased Reliability
• Tweeter Size: 1 Inch Clear Highs While Handling Plenty Of Power Without Sounding Harsh
• Tweeter Surround Material: Kapton Lightweight And Efficiently Dissipates Heat
   

Authorized Metra Internet Retailer!

Features:

• Metra 72-1002 Speaker Harness Connector for 1984-02 Jeep+Dodge+Cherokee Vehicles
• Chrysler 2-pin flat speaker connector
  
• One kit needed per pair of speakers
• Compatible with the following vehicles:
  
  • Jeep - 1988-1996 Cherokee, 1986-1992 Comanche, 1986-1992 Grand Wagoneer, 1984-1996 Wrangler.
    
  • Dodge - 1994-2002 Ram Pickup
    

Row content