Alpine R2-SB10V 10" 750w R2-W10D4 Subwoofer+Ported Sub Enclosure Box+Alpine Amp
Product Description
- (1) Alpine R2-SB10V 10” R-Series 750W RMS Halo Subwoofer in Sub Box Enclosure 2 Ohm
- (1) Alpine R-A75M 750 Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D
- (1) Rockville RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's
Description of R2-SB10V:
The next generation of sound performance is here with the new R-Series Halo Preloaded Subwoofers featuring the new R-Series “R2” subwoofers for more accurate and authoritative bass.
Features:
- Unique ProLink™ Design
ProLink™ is unique to Alpine and allows you to link two R2-SB10V enclosures together using an optional KTX-H10 linking kit to create a dual subwoofer enclosure. - Stand Out in the Crowd
Drawing inspiration from the sleek, tapered lines and clean silver finish of the Alpine Halo display, the R2-SB10V shares the same unique, curved edges outlined by a silver trim and a metallic front baffle for a matching system aesthetic. - Improved Performance
The new R-Series subwoofers now feature larger, double-stacked magnets that contribute more motor force for deeper bass and tighter bass control compared to the previous generation.
Specifications:
- Size: 10”
- Weight: 42 lbs
- Dimensions: 16” x 12.68” x 14.5”
- Frequency Response: 26Hz - 200Hz
- Power Range: 300W - 750W RMS
- Power Handling: 750W RMS / 2250W Peak
- Magnet Weight: 123 oz
- Voice Coil Diameter: 65.5 mm (2.6”)
- Linear Excursion (Xmax): 20 mm
THIELE-SMALL PARAMETERS
- Sensitivity (1W/1m): 82.3 dB
- DC Resistance (Re): 1.9? + 1.9?
- Free Air Resonance (Fs): 31 Hz
- Equivalent Stiffness: 18.2 L
- Mechanical Q (Qms): 7.07
- Electrical Q (Qes): 0.5
- Total Q (Qts): 0.47
- Cone Area (Sd): 333 cm2
- Linear Excursion (Xmax): 20 mm
- Mechanical Travel (Xmech): 70 mm
Description of R-A75M:
The R-Series amplifiers utilize Alpine’s advanced amplifier platform that takes the classic Class-D amplifier circuit and adds dual post-filter feedback loops for unmatched accuracy and control. This technology., originally launched in the premium X-Series amplifiers,, produces efficient power with enhanced dynamic range, qualifying the R-Series amplifiers to be Hi-Resolution Audio compliant.
PROPER SOUND STAGE
This new technology minimizes audible imperfections like excessive phase shift
and internal noise which can deteriorate sound quality.
NEXT LEVEL SYSTEM BUILDS
R-Series amplifiers have a built-in bandpass filter which lets you design an
active speaker set-up without a separate processor. Improve the sound quality of
component speakers by ditching your passive network. Avoid added phase shifts
and power losses by individually powering each component and assigning your own
frequency bands for the incredible sound you’re looking for.
THE LOUDEST FAMILY ON THE BLOCK
The “R” line of speakers and subwoofers have a heritage of sound quality you can
hear from a block away, and the newly added R-Series amplifiers are no
exception. Aside from their best-in-class performance, these amplifiers are
tuned to emphasize the characteristics of the R-Series speakers and subwoofers,
giving you that legendary R-Series experience.
Features:
- Mono subwoofer amplifier
- Power Output
- 500 watts RMS x 1 at 4 ohms (750 watts RMS x 1 at 2 ohms)
- CTA-2006 compliant
- Variable low-pass filter (50-400 Hz, 24 dB/octave)
- Variable bass boost (0-12 dB at 50 Hz)
- Variable subsonic filter (min-40 Hz, 24 dB/octave)
- Remote: RUX-KNOB.2 (Sold Separately)
- Preamp and speaker-level inputs
- Speaker wire to RCA adapter required for speaker-level input - we recommend the Rockford Fosgate RFI2SW
- preamp outputs
- Fuse rating: 40A x 2
- Dimensions: (W x H x D) 9" x 2-1/16" x 7-1/8"
Specifications:
Power Specifications - Subwoofer Channel
- RMS Power @ 4 ohms :500 watts x 1 channels
- RMS Power @ 2 ohms: 750 watts x 1 channels
Power Specifications - Subwoofer Channel
- Peak Power @ 4 ohm: 1000 watts x 1 channels
- Peak Power @ 2 ohms: 1500 watts x 1 channels
Amplifier Specifications
- Number of Channels: 1 - Mono
- Total Peak Power Output: 1000 watts
- Total RMS Power Output: 750 watts
- Maximum Input Gauge Size: 4 AWG
- Minimum Impedance Unbridged: 4 ohms
- THD+N < 002% (ref. 1W into 4ohm)
- S/N ratio: > 85dB (ref. 1w into 4ohm)
- Speaker Level Inputs: Optional (Requires Accessory Adapter)
- Preamp Outputs: Mono output
- Built-in Crossover: Low-Pass (LP)
- Subsonic: Low-Pass Crossover Frequency: 50 - 400 Hz
- Subsonic Filter: 10 - 400 Hz (+/- 3dB)
- Damping Factor: > 1500
- Bass Boost: 0 - 12 dB
- Fuse Rating: 40A x 2
- Total Fuse Rating 80
- Hi-Res Certified
Video of RWK41:
Unboxing Video for RWK41:
Description:
The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.
1. Our RCA cables are 100 % copper. These are top of the line RCA cables
2. Better Resistance: The only thing that really matters with wires is the resistance rating. This is a measurement of conductivity and how much signal is loss per foot of wire. Since Rockville wires are made with around 3 times as much copper as any other wire at this price point, these wires had a much better resistance rating which means they will transfer more power to your amps than the other brands.
3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.
4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.
The RCA signal transfer cables included in this kit feature blue and silver twisted pair technology in a clear outer jacket insulation skin. Not only do the blue and silver wires look cool but they also provide superior signal transfer with maximum noise suppression. They are 100% copper to provide absolute lossless perfect signal transfer to your receiver. This technology reduces interference, so your audio signal flows clean and pure at all power levels.
This kit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can be sure it will handle the all the DC power that your amp will need without even the slightest loss of current. The included 7 split loom tube provides protection for your power cable from the typically harsh environment found under the hood of your car.
Audiosavings product experts have tested this amp kit against many leading amp kits on the market and were were impressed not only by the great looks but by the quality of these Rockville installation kits as well. These kits had a lower resistance rating than the other brands we compared and tested them against. What this means is that Rockville manufactures their kits with more copper than other kits at this price point, ultimately providing your amplifiers with better and cleaner DC power, so they work cooler and more efficiently. You will hear the difference a Rockville installation kit will make!
Features:
- 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
- 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
- 17’ – 18 Gauge Blue Remote Cable
- 17’ – 16 Gauge Clear Speaker Wire
- 3’ – 4 Gauge Clear SuperFlex Ground Wire
- Gold Plated AGU Heat Resistant Fuse Holder
- 60 Amp AGU Gold Plated Fuse
- 7’ Split Tube Loom
- Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
Shipping & Returns
Row content
