Rockford Fosgate Punch P2D4-15 800w 15" Subwoofer+Amplifier+Amp Kit+Sealed Box

Package Includes:

• (1) Rockford Fosgate 15" Dual 4-Ohm Car Audio Subwoofer
• (1) Rockville Single 15" Sealed Car Sub Enclosure Box
• (1) Rockford Fosgate Prime R500X1D 500 Watt RMS Mono Car Audio Class D Amplifier
• (1) Rockville RWK41 4 Gauge Complete Wire Kit w/RCA's
• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

---

Description for Rockford Fosgate Sub:

Rockford Fosgate has always been known as "The PUNCH" and the P2 15" subwoofer certainly continues with the tradition. Kevlar fiber reinforced paper cones deliver bass impact you can feel along with VAST technology to increase surface cone area up to 25%. The P2 subwoofers perform best in standard sealed and vented enclosures. Includes diamond cut cast aluminum trim ring. Optional grille insert available.

Features:

• Rockford Fosgate Punch P2D4-15 400w RMS 15" Dual 4-Ohm Car Audio Subwoofer Sub
• Dual linear spider with embedded 16 AWG tinsel leads
  
• Custom 10-AWG nickel plated push terminals
  
• Extended pole piece and bumped vented backplate
  
• High-temp voice coil with spun-laced Nomex® re-inforcement collar
  
• Protective PVC textured magnet cover
  
• Kevlar fiber reinforced paper cone
  
• StampCast basket with integrated spider venting
  
• Diamond cut cast aluminum trim ring with optional grille
  
• CEA-2031 Compliant:
  
• Size: 15"
  
• Nominal Impedance: Dual 4-Ohm
  
• Power Handling (Watts RMS): 400 Watts RMS
  
• 800 Watts Max
  
• Voice Coil Diameter: 2.25" (57.15 mm)
  
• Magnet Weight (oz): 81 oz. (2.30 kg.)
  
• Speaker Connector: Dual 10 AWG compression
  
• Fs (Hz): 20.9
  
• Re (Ohms): 6.40
  
• Le (mH): 5.4
  
• Qms: 5.70
  
• Qes: 0.74
  
• Qts: 0.66
  
• Vas (Liters): 219.6
  
• Sd (cm2): 894
  
• SPL (dB @ 1w/1m): 86
  
• Xmax (mm): 12.2
  
• Woofer Displacement: 0.134 cu. ft. (3.8 Liters)
  
• Cutout Diameter: 13.9 in. (353 mm)
  
• Mounting Depth: 7.34 in. (186.5 mm)
  
• Shipping Weight: 17.9 Lbs. (8.11 kg)
• Recommended Enclosure Type: Ported / Vented or Sealed
  
• Minimum Sealed Box Volume: 1.30 cubic feet
  
• Optimum Sealed Box Volume: 1.58 cubic feet
  
• Maximum Sealed Box Volume: 3.50 cubic feet
  
• Optimum Ported Box Volume: 2.66 cubic feet
  
• Shallow Mount Installation: No

---

Description of R500X1D:

CEA 2006
CEA Compliant ensures speakers and subwoofers perform the ratings given, Rockford Fosgate is CEA Compliant and performs to their strict standards.

Features:

• Rockford Fosgate Prime R500X1D 500 Watt RMS Mono Block Class D Car Amplifier
• 12dB/octave Butterworth crossover
• RCA pass-thru outputs
• On-board Punch EQ with +18dB boost @ 45Hz.
• High level inputs
• Remote PLC (Punch Level Control)
• 0°/180° Phase Switch
• Real time output and power supply thermal sensing
• Cast aluminum heatsink
• 4 Gauge power/ground connectors
• MOSFET power supply
• Over current protection
• Short circuit protection
• Muted turn on

Details:

• CEA-2006 Compliant
• Number of Channels: 1
• Rated Power (RMS Continuous Power): 250 Watts x 1 @ 4-Ohms
• 500 Watts x 1 @ 2-Ohms
• Total Power
• (Sum of Rated Power): 500 Watts RMS
• Dynamic Power
• (PVC/PowerCube® Measurement):
• Bridgeable: No
• Efficiency (average): 85% @ 4-Ohm 85% @ 2-Ohm
• Crossover Controls: Low-Pass (LP): 50Hz to 250Hz @ 12dB/octave Butterworth
• Tone Controls: Punch Bass: 0dB to +12dB @ 45Hz
• Phase Control: Variable 0° to 180°
• Signal Input: Low Level: 1 RCA Pair
• Signal Output: Low Level: 1 RCA Pair
• Power Input Connector: Screw Terminal
• Power Wire Gauge: 4 AWG
• Speaker Output Connector: Screw Terminal
• Speaker Wire Gauge: 8 AWG
• Heat Sink Type: Extruded Aluminum
• Cooling: Convection
• Remote Controls: Punch Level Control: When connected is linked to "gain control" to provide remote output level
• Visual Indicators: Power Protect
• Circuit Topology Class: Class-D
• Frequency Response: 20Hz to 250Hz +/-1dB

---

Video of RWK41:

Unboxing Video for RWK41:

AuthorizedRockville Dealer!

Description:

The Rockville RWK41 4 AWG (American Wire Gauge) amp kit has the following differences over other amp kits on the market at this price point.

1. Our RCA cables are 100 % copper. These are top of the line RCA cables

2. BetterResistance: The only thing that really matters with wires is the resistancerating. This is a measurement of conductivity and how much signal is loss perfoot of wire. Since Rockville wiresare made with around 3 times as much copper as any other wire at this pricepoint, these wires had a much better resistance rating which means they willtransfer more power to your amps than the other brands.

3. We do not cheat you on the thickness of the wire. These are standard American wire gauge thickness. This is another reason our conductivity is better than anything else at this price point. Other brands in the market place write 4 gauge, but cheat you on the thickness. We are honest about the thickness.

4. The Rockville amplifier installation kits feature a new soft abrasion proof insulating jacket. This rugged PVC outer jacket allows for 100% improved flexibility over standard power cables making them extremely easy to route through your vehicles interior, and it maintains exceptional resistance to grease and oil. The PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F.

TheRCA signal transfer cables included in this kit feature blue and silvertwisted pair technology in a clear outer jacket insulation skin. Notonly do the blue and silver wires look cool but they also providesuperior signal transfer with maximum noise suppression. They are 100%copper to provide absolute lossless perfect signal transfer to yourreceiver. This technology reduces interference, so your audio signalflows clean and pure at all power levels.

Thiskit also includes a massive 60 Amp AGU Gold Plated Fuse, so you can besure it will handle the all the DC power that your amp will need withouteven the slightest loss of current. The included 7 split loom tubeprovides protection for your power cable from the typically harshenvironment found under the hood of your car.

Audiosavingsproduct experts have tested this amp kit against many leading amp kitson the market and were were impressed not only by the great looks but bythe quality of these Rockville installation kits as well. These kitshad a lower resistance rating than the other brands we compared andtested them against. What this means is that Rockville manufacturestheir kits with more copper than other kits at this price point,ultimately providing your amplifiers with better and cleaner DC power,so they work cooler and more efficiently. You will hear the difference aRockville installation kit will make!

Features:

• 1 – 17’ High Grade Twisted Pair of 100% Copper RCA Cable
• 17’ – 4 Gauge Translucent Blue SuperFlex Power Cables
• 17’ – 18 Gauge Blue Remote Cable
• 17’ – 16 Gauge Clear Speaker Wire
• 3’ – 4 Gauge Clear SuperFlex Ground Wire
• Gold Plated AGU Heat Resistant Fuse Holder
• 60 Amp AGU Gold Plated Fuse
• 7’ Split Tube Loom
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets

---

Description for Rockville Enclosure:

The RSP115 single 15" sealed speaker box is made in the USA with Grade “A” ¾” MDF wood. This enclosure is made with precision cutting machinery by industry experts that have been making these enclosures in the USA for over 20 years. All Rockville enclosures come with a customized enhanced glue that is unmatched by any other manufacturer. That means that the carpet will stay in place and not rip or tear. The ¾” USA MDF is much stronger then any type of import wood. This will keep your box performing at an optimal level by not flexing and distorting your woofers. Your woofers will thank you! EVERY Rockville enclosure is not only glued at all joints but stapled as well. If that wasn’t enough we add a layer of silicon to every seam! This makes your Rockville enclosure rock even more!

MADE IN THE USA WITH PRIDE!

Features:

• Rockville RSP115 Single 15" Sealed 1.18 Cu. Ft. Subwoofer Enclosure
• Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!
• 3/4" USA Heavy Duty MDF Construction
• Machine precision cut mounting holes
• Top of the line Glue for extra durable adhesion
• Designed, tested, and engineered to work with most of today’s popular woofers. These enclosures are built with the quality additives needed to maximize the performance of any sound system.

Enclosure Measurements:

• Type of Enclosure: Sealed
• Enclosure Sub Size: Single 15"
• Dimensions in Inches: 16.5" Width x 13" Depth x 16.5" Height
• Top and Bottom Depth: 13"
• Mounting Depth: up to 12.375" (enough depth for any sub on the market)
• Gross Volume Per Sub (Measurement for the outer dimensions of the box): 2.04 Cubic Feet
• Net Volume Per Sub (Measurement for the outer dimensions of the box less the thickness of the wood): 1.51 Cubic Feet

---

Complete Single Subwoofer Enclosure Installation Kit!

Includes:

• 10 Drywall Wood Screws (Wood screws are the type of screws; the screws are actually made of metal)
• 12 Feet of 14 AWG Blue Speaker Wire
• 2 Spade Terminals

This accessory package includes everything you need to install one subwoofer into an enclosure, and wire to connect the enclosure to your amplifier. This package is a top of the line accessory package which we put together and tested.

The drywall wood screws were hand selected by our installation experts because they drill into the enclosure very cleanly, without chipping the enclosure. The speaker wire is 14 gauge. This is way better than using 16 gauge. You can be 100 % sure that your enclosure will have a clean signal to the amplifier with this top of the line speaker wire. These spade terminals have also been hand selected by our installation experts to make the internal wiring simple, secure, and to run the audio signal cleanly.

Row content