Rockville SK515 PACKAGE 15" 2000w Loaded K5 Car Subwoofer Enclosure+DB12 Amplifier

Loaded Sub Enclosure Features:

• Rockville Single 15" K5 2000w Car Subwoofer Pre-loaded In Vented Sub Enclosure
  
• Peak Power Handling: 2000 Watts
  
• Program Power Handling: 1000 Watts
  
• CEA Rated RMS Power Handling: 500 Watts
  
• Final Impedance: 2 Ohm
  
• ¾” MDF enclosure
  
• Bonded stapled and braced
  
• Computer designed vents
  
• Angled at 15 % for perfect bass alignment
  
• High quality aviation grade tweed carpet
  
• Satin Nickel speaker wire push terminals
  
• Enclosure air space is 3.28 Cu Ft per sub
  
• Vent dimensions (inches): 2.5" x13" x 12.5"
  
• Tuning frequency of enclosure: 35 Hz
  
• 2.5"  4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire
  
• The wire we use to wind the voice coil is imported from Japan which is way better quality than the standard China wire
  
• 60 Oz High Quality Magnet
  
• Cast Iron  Basket With Black Sanded Finish
  
• Fiber Reinforced Ultra Stiff Black Non-Pressed Paper Cone – This cone is very efficient which makes the speaker sound louder even without requiring a lot of power to push it
  
• Thick Foam Surround Provides Incredible Sound Quality With Minimal Distortion
  
• Blue Stitching Cone Reinforcement Ensures Long Life
  
• Polypropylene Dust cap
  
• Gold-Plated spring loaded push terminals
  
• Impedance: Single 2-Ohm Voice Coils
  
• Vented Hole on T-yoke Enhances Heat Dissipation
  
• Mounting Gasket with Rockville branding Makes it Easy To Mount the Subwoofer Air-Tight
  
• High BL Magnetic Motor Gap
  
• High grade black glue that handles extremely high temperatures which allows our woofer to handle even more power
  
• Cutout Diameter: 13.85 inches
  
• Mounting Depth: 5.98 inches
  
• Frequency Response: 28 Hz - 1.0K kHz
  
• 6mm T-Yoke + 8mm Washer
  
• Sensitivity: 90dB
  
• Weight of enclosure: 65.7 Lbs.
  
• Dimensions of enclosure: 23 “x 18.5" x 20"
  
• Shipping Weight: 77.8 Lbs.
  
• Shipping Box Dimensions:  24.2" x 22.4" x 22" 
  

Features of Amplifier:

• Rockville dB12 Mono Class D 2 Ohm Amplifier
  
• CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc.)
  - 2 Ohm: 500 Watts x 1 Channel <1% THD+N
  - 4 Ohm: 325 Watts x 1 Channel <1% THD+N
  
• Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song)
  - 2 Ohm: 2000 Watts x 1 Channel
  - 4 Ohm: 1300 Watts x 1 Channel
  
• High-Speed MOSFET Power Supply
  
• Optical Coupler Class “D” Technology
  
• Fully Adjustable 12dB / Octave Crossover with Differential Circuitry
  
• Low Pass Filter: 50Hz - 250Hz
  
• Subsonic Filter: 15Hz - 55Hz
  
• Phase Control Switch
  
• Full IC-Controlled Protection Circuitry
  
• Remote Dashboard Subwoofer Control
  
• Fully Adjustable 12dB Bass Equalizer
  
• Mute and Delay Soft Start System
  
• RCA Preamp Line Output
  
• 8 Volt Preamp Circuitry
  
• Status Mode LED Indicator
  
• Minimum THD at Rated Power: <0.1%
  
• S / N Ratio: >90dB
  
• Under Voltage Protection at 10V
  
• Over Voltage Protection at 16V
  
• Frequency Response: 15Hz - 250Hz
  
• Damping Factor: >150 @ 100Hz
  
• 80 Amp Maxi Fuse
  
• Dimensions: (L x W x H) 13" x 8.8" x 2.4"
  

Amp kit features:

• Rockville RWK41  4 Gauge 2 Channel Car Amplifier Wiring Installation Kit
  
• (1)  17 High Grade Twisted Pair of 100% Copper RCA Cable
  
• 17  4 Gauge Translucent Blue SuperFlex Power Cables
  
• 17 18 Gauge Blue Remote Cable
  
• 17 16 Gauge Clear Speaker Wire
  
• 3 8 Gauge SuperFlex Ground Wire
  
• Gold Plated AGU Heat Resistant Fuse Holder
  
• 60 Amp AGU Gold Plated Fuse
  
• 7 Split Tube Loom
  
• Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets
  
• Soft abrasion proof insulating jacket allows for 100% improved flexibility
  
• PVC outer jacket can with-stand an extreme temperature range of -40 to 220 degrees F

Row content